Cutty Sark - Unboxing

Подписаться 19 тыс.

Просмотров 10 тыс.

50% 1

Welcome to my new project. This is Cutty Sark and here you can see the unboxing. This model will be build in cooperation with Billing Boats like the Victory. I am going to throw on copper plates and of course LED lights.
What i want from you is to vote about the color of the lights, do you want to have white or yellow lights? This Video comes in 4K.
Votes here and in FB
White LED Votes = 0
Yellow LED Votes = 17
Check out my personal recommendations from Modelers Central :
For Beginners
www.modelersce...
www.modelersce...
www.modelersce...
www.modelersce...
Advanced
www.modelersce...
www.modelersce...
www.modelersce...
www.modelersce...
www.modelersce...
www.modelersce...
www.modelersce...
www.modelersce...
www.modelersce...
www.modelersce...
Expert
www.modelersce...
www.modelersce...
www.modelersce...
www.modelersce...
www.modelersce...
www.modelersce...
www.modelersce...
Tools
www.modelersce...
www.modelersce...
www.modelersce...
www.modelersce...
www.modelersce...
www.modelersce...
www.modelersce...
www.modelersce...
As an Amazon Associate I earn from qualifying purchases. Affiliate links for tools :
Step Looper Pliers Create Eye Pins amzn.to/3KQyCCk
Big cutter amzn.to/3wzuyiF
Scalpel with tips amzn.to/3PwTlvb
Wire cutter amzn.to/3LzsXxu
Cyanoacrylic glue with tips amzn.to/3PwV83t
Hand drill with tips amzn.to/3agcoK7
Power drill amzn.to/3PszsFw
Drill tips from Cobalt amzn.to/3MF1oEy
Sandpaper 60 degrees amzn.to/39DA0bg
Small Saw amzn.to/3NpZRSD
Soldering iron amzn.to/3lu6jMj
Small bowl amzn.to/3NoJSEk
Wood putty pine amzn.to/3MDrGH3
Colored paints set amzn.to/3LyLha7
Wood sealer amzn.to/3lybGdI
Nitro thinner amzn.to/3yMX7e5
Paint thinner amzn.to/3ag57dl
Gloss varnish for yachts amzn.to/3wy62hK
Pins amzn.to/3G3Yt5K
Springs set amzn.to/3NxPJHH
Pencils amzn.to/3wvkqrc
Small flat screwdriver amzn.to/3yPPkfr
Flat Pliers amzn.to/38I6q47
Small hammer amzn.to/3sNLsrF
Needle threaders amzn.to/3yVTaUx
Diamond files set amzn.to/3Luy029
Protection gloves amzn.to/3agcGAH
Ruler amzn.to/3sP5kKU
Blower amzn.to/3LxQ8Ir
Dremel pack amzn.to/3sNzFts
Cleaning brushes amzn.to/3NjfKu6
Paint brushes amzn.to/3wCWotf

Опубликовано:

3 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 97

@AhmetAygit 10 месяцев назад

Good luck John looks like good project..I can not wait..

@JohnsWoodenShips 10 месяцев назад

Soon my friend, after the Victory is finished :)

@johnreid5539 10 месяцев назад

Hello john. Looking forward to the build. Saving to make her my next ship. again thank you for sharing

@JohnsWoodenShips 10 месяцев назад

I hope that you will enjoy it :)

@The_Oldguy 10 месяцев назад

Looks like fun in a box! I'll be along for this build also. Keep up the educational videos, they mean a lot to us beginners. - Mike

@JohnsWoodenShips 10 месяцев назад

Thank you very much my friend!!!

@cantycanvas4150 10 месяцев назад

A restaurant in a town I used to live in had a Cutty Sark model in the window. I often stopped to look at it. Can’t wait to see how she’ll turn out from your skilled hands, John! Looking forward to this one🙂

@JohnsWoodenShips 10 месяцев назад

We will enjoy this one too :)

@TheSuperEverests 2 месяца назад

I like this u boxing very much, my friend... just starting watching ur build...goodness me many evenings shall i spend with your good self and your wonderful builds.....thank .you.. I hope you never delete these videos. They are a life saver for me , theres a comfort in them....tho i miss Occre builds.....just saying...😊 Markos

@JohnsWoodenShips 2 месяца назад

Hi Markos! Missed you!!! I have just started a new OcCre build, San Felipe and i have done the unboxing some months ago, check it out my friend :)

@richmondtigers7495 10 месяцев назад

Good to see a merchant ship build for a change. Really looking forward to this.

@JohnsWoodenShips 10 месяцев назад

There will be some extras on this one too :)

@nigeldouglas1529 10 месяцев назад

Looking forward to this John, another iconic ship … regards Nigel 😊

@JohnsWoodenShips 10 месяцев назад

You will love it too my friend!!!

@jamesdennis2004 10 месяцев назад

One of my personal favorite ships. I think I may get this one for me to build next year. I might do that it will be my second wooden ship.

@JohnsWoodenShips 10 месяцев назад

And she will be a very beautiful one!

@jamesdennis2004 10 месяцев назад

@@JohnsWoodenShipsand I think I may get the copper for the button of the ship But It gives me a question do I leave the copper the same color that it has or do I paint it red. Because I have been told by some people that she had both colors so I don't know yet. The box art show it with red but I don't know.

@JohnsWoodenShips 10 месяцев назад

@@jamesdennis2004 You do it the way you like it better

@JAFKARNAT 10 месяцев назад

Beautiful model, looking forward to seeing her being constructed. Yellow light definitely.

@JohnsWoodenShips 10 месяцев назад

Thank you very much! Thank you for voting!!!

@peterbuffel351 10 месяцев назад

My preference go to yellow lights. Looking forward to the new building series.

@JohnsWoodenShips 10 месяцев назад

Noted and added in the description, thank you Peter!

@GregWilson635 10 месяцев назад

I've had my eye on this kit for a while. Will look forward to watching you build it :)

@JohnsWoodenShips 10 месяцев назад

Thank you my friend!!! What color light do you prefer?

@GregWilson635 10 месяцев назад

@@JohnsWoodenShips Normally I would say orange but for this ship I think yellow would look good.

@muskokamike127 10 месяцев назад

wow, that victory is beautiful.....

@simonsoegaard60 10 месяцев назад

Hello John, the basis for another good one, never build it, but some years ago I did a bottom up restauration of one for a friend. I'm gonna follow you build with the greatest interest. Best wishes Simon

@JohnsWoodenShips 10 месяцев назад

Hello my friend! Thank you very much!!! What is your vote for the lights?

@simonsoegaard60 10 месяцев назад

@@JohnsWoodenShips yellow, made it on Facebook

@RD-rs6oz 10 месяцев назад

Hello John. I am convinced that you have mutch more experience in building wooden ships than i have , but Billing Boats cannot completely convince me and i prefer Occre, witch i think is the better company for the time being. That's just my opinion. I have to say that i have been enjoying your videos for several years now. Many greetings0😊

@JohnsWoodenShips 10 месяцев назад

It is not about convincing someone to buy the model, it about making a model , more challenging and make it the way i like it, this mean that i will add a few extra parts and will change some. if you are following the Victory series, you must have seen that the Victory is unique, non other exists like this one, lots of details and great result!

@IvanekRC 5 месяцев назад

Beautiful model kit. Im seating in first row and watching your build with excitement 😊

@JohnsWoodenShips 5 месяцев назад

I am glad that you like it, 😌 thank you very much!!!

@billymo1907 10 месяцев назад

Hi John - another interesting project to follow. My preference for lighting are the flickering yellow , simulating candles, I think they are more realistic. I have just started on Artesanis Latinas new version of the Santasima Trinidad, and I'm using it to start my vlog on UTube, so learning about video editing at the same time - not bad for a 76 year old eh?

@JohnsWoodenShips 10 месяцев назад

Thank you very much for your vote Bill!!! It is never too late, enjoy your build and be careful of the 3mm skeleton :)

@michaelryan6884 10 месяцев назад

Looks like a wonderful project to come!

@JohnsWoodenShips 10 месяцев назад

I think so too!!

@blindsquirrel1339 8 месяцев назад

I mentioned to someone the other day I wanted to build a wooden model ship. we were talking about bucket list things. His reaction was that’s nice. I think I have one in the box underneath my bed inherited from my grandfather. The next day he brings me over he constructor Cutty Sark from 1985 mint condition. Zero parts missing. Talk about asking you shall receive. I’ve been looking for a week or so on RU-vid trying to find someone building a Cutty Sark and lo and behold. I found you I thought I had already subscribed to you because I’ve seen several of your videos but now that you are building the Cutty Sark, I am going to try and build along with you. Good luck. Wish me luck by the way this is my third wooden ship. I built model cars, my whole life, but only third model. Wish me luck I need you to really mean it.

@JohnsWoodenShips 8 месяцев назад

Welcome aboard!!! I wish to you the best of luck and i want you to know that if you'll need any help you can ask me anything :)

@kenstewart1987 10 месяцев назад

Very nice subject. Can't wait to see your results.

@JohnsWoodenShips 10 месяцев назад

In a few months, it will be interesting :)

@zjiep111111 10 месяцев назад

Another big project for You, John. I would use yellow LED lights.

@JohnsWoodenShips 10 месяцев назад

Thank you very much my friend! Noted and written in the description.

@genojoe3176 10 месяцев назад

And here we go!!!!

@NikkiKuehnemund 10 месяцев назад

No presawn sails, a lot of plastic parts, no exotic wood, just plywood.. I remember when John said that he didn't like Artesania Latina because it was crap.. Well, here we are with the same type of kit, and this is good.. I could actually hear in your voice that it is not the same type of excitement as you used to have in other unboxings, but it may just be me.. Don't misunderstand me, John, I like your work a lot, and I thank you for getting me into this hobby, but billing boats are not giving the buyers the quality they are paying for.. Anyway, I will watch this build series as well:) Give Wolf and Buddy some hugs from me:)

@JohnsWoodenShips 10 месяцев назад

It has nothing to do with Artesania, it is way better. Also i will build this the way i like ,just like the HMS Victory. And if you are watching the Victory series you can understand that is one the best model kits around.

@NikkiKuehnemund 10 месяцев назад

@JohnsWoodenShips All I'm saying is that Billing Boats are using the same type of wood in their kits as Artesania Latina does. Why is the one better than the other..? Ok, Artesania may use thinner plywood, but the hull is constructed with more parts and as a 3d puzzle, giving it the strength it needs.

@JohnsWoodenShips 10 месяцев назад

@@NikkiKuehnemund they do not use the same type of wood.Quality is much better than Artesania

@eduardosuarez4239 10 месяцев назад

Felicidades John adquiriste un modelo de barco muy hermoso....🇲🇽🇲🇽....

@JohnsWoodenShips 10 месяцев назад

Thank you very much my friend! What is your vote for the color of lights?

@eduardosuarez4239 10 месяцев назад

@@JohnsWoodenShips me gustaría yellow lights.....🇲🇽🇲🇽....

@JohnsWoodenShips 10 месяцев назад

@@eduardosuarez4239 Noted , thank you my friend!

@jeanshakespeare4854 10 месяцев назад

A nice soft yellow light would be more natural for the year she was built, looking forward to seeing her built, 🤓

@JohnsWoodenShips 10 месяцев назад

Thank you for your vote!

@ladygardener100 Месяц назад

Very dim yrllow white would be more authentic for lamps, but warm white for portholes

@JohnsWoodenShips Месяц назад

We took a vote for the color of the lights before i start the build.

@Guerrillakalle 10 месяцев назад

Hope some day there will be a model of a fliyng-p liner like the pamir

@dailyguy6189 10 месяцев назад

Could you make another video of you showing all of your models? It’s been awhile and you have made some new additions 😊

@JohnsWoodenShips 10 месяцев назад

Yes i will, for the Christmas Video :)

@MyFinbar 10 месяцев назад

Hi John, I have been watching your channel for a long time, and admire your skills. I sense that you are a little underwhelmed by this unboxing? This kit looks very inferior compared to your other kits. Normally you are full of excitement when you are unboxing! How about doing a scratch build? You are more than capable! I love your work, you are very skilled. All the best & keep up the good work.

@JohnsWoodenShips 10 месяцев назад

When i do an unboxing i immediately start to imagine how it will be when it's finished and also what changes i will make. That is exciting and i will make a great one out of this one like i did with Victory!

@MyFinbar 10 месяцев назад

I vote for candle light simulation.

@JohnsWoodenShips 10 месяцев назад

@@MyFinbar Noted, thank you for your vote!

@dcee2899 10 месяцев назад

I am building this from a 1982 vintage Billing kit. Except for the laser cut wood parts it looks exactly the same as from 40 years ago, same plastic parts, blocks and plans! The Cutty Sark was not sheathed in copper plates but Muntz metal which is brass. I have replaced most of the decor plastic parts with photo etched parts which you can buy and have bought some proper sails. I think the quality and detail of this kit is not up to modern standards and you will need to do a lot of extra work than shown in the plans to make it to a good standard. The biggest problem with this kit is that the bulk head spacing is too large and it makes the hull planking very difficult to do especially around the stern. I am about 40% through the build but it took me probably 3x longer to get the hull right than on any of my previous models. I hope it goes OK for you, but watch out, it will try your patience! 🙄

@JohnsWoodenShips 9 месяцев назад

Thank you very much for the info, i will try to make use of them :)

@robertsalanon2909 2 месяца назад

I don·t see this "Cutty Sark ""Is the beautiful model kit ..To see now ...Were are all yours models....Colllection ...??

@JohnsWoodenShips 2 месяца назад

I have them in 2 houses my friend, check out the Naval Museum video :)

@PUNISHERMARKO 10 месяцев назад

as much as I love your videos, I just think that billing boats supplying plastic deadeyes and plastic blocks with wooden ship and call it wooden model in this price range is unacceptable and I personally if I have bought this ship and saw that they supply plastic in there i would have returned it same day. Nice video John, but this is unacceptable supplying plastic cheap stuff with expensive wooden model kit. I had 5 very large wooden model kits and not a single one had plastic in them just wood and metal as its wooden not plastic...

@JohnsWoodenShips 10 месяцев назад

I have seen plastic dead eyes and blocks in OcCre models as well. All you have to do is contact them and you will get a replacement with wooden ones. I already have them in the kit.

@PUNISHERMARKO 10 месяцев назад

@@JohnsWoodenShips not sure which occre models did have plastic deadeyes and blocks, but i had 4 large models from them and all came with wooden ones and now i have different ship very expensive and again wooden ones. to me, these parts should be the strongest as there is lots of stress on them and company replacing these with plastic is to me unacceptable, cheaping out on something what should be high/highest quality..thats my opinion on plastic parts in high quality models kits. I also bough my 6th boat for next year for £1100 I havent started on it yet, but once again 0 plastic and like I said if there was any plastic it would be going straight back to seller. I pay this amount of money and expect highest quality not plastic

@JohnsWoodenShips 10 месяцев назад

@@PUNISHERMARKO Check out my HMS Beagle series, you will see that the blocks and dead eyes are made out of plastic. It was like that at La Candelaria and i asked for wooden ones.

@PUNISHERMARKO 10 месяцев назад

@@JohnsWoodenShips ah ok, will have a quick look :)

@stuartlittle62 10 месяцев назад

I've only tried one Billings kit HMAV Bounty. The plans are based on her before being converted to Bounty by the navy. A lot of 'kit bashing' was required for the correct 'spec'. The kit included plastic gun carriages ! The instructions very basic. I notice their Victory has no wales. The bounty kit has put me off Billings, I'll stick to OcCre, of whiich I have four waiting to be done. @@PUNISHERMARKO

@stuartlittle62 10 месяцев назад

John, I guess the cannon is for signaling.

@JohnsWoodenShips 10 месяцев назад

Have no idea :)

@richmondtigers7495 10 месяцев назад

Yes for signalling and also, I believe, a requirement of insurers.

@wildsau1965 10 месяцев назад

I've noticed that on most kits of the cutty sark they forget the triple sails .

@JohnsWoodenShips 10 месяцев назад

You are referring on the bow?

@wildsau1965 10 месяцев назад

definitely yellow lights

@JohnsWoodenShips 10 месяцев назад

Thank you for voting!

@muskokamike127 10 месяцев назад

For $500 cdn the plastic fittings is a deal breaker for me. Back in the day you had to buy the fittings for model ship kits separately which was a bummer.

@JohnsWoodenShips 10 месяцев назад

As you have seen i got the wooden parts with no extra charge :)

@muskokamike127 10 месяцев назад

@@JohnsWoodenShips yeah that's great. It'll take quite a bit of work to build the lifeboats out of wood, but it'll be worth the effort. I forget which kit it was, but I wasn't happy with the anchor chain. The links were open and looked horrible. Since I didn't have a hobby shop anywhere nearby I scoured the jewelry counters of dept stores looking for the right scale chain with soldered links. Eventually got one, then tarnished it up with thinned black paint and then rusted it with thinned red paint.

@JohnsWoodenShips 10 месяцев назад

@@muskokamike127 For the boats i will do something for sure. But it's too early to worry about that.

@muskokamike127 10 месяцев назад

@@JohnsWoodenShips would you build them out of a solid block? I did a small runabout years ago and made it out of a block of spruce then planked it with some scraps I had lying around. I'm getting lazy in my old age, I'd download an STL file and carve one on my cnc router lol I wish I could post pics here, I'd show you a model spad I made. I cut the parts out on my cnc and then shaped and sanded to make it all nice.

@JohnsWoodenShips 10 месяцев назад

@@muskokamike127 you can send me some photos here : john.aliprantis@gmail.com

@JohnSandberg-n9o 10 месяцев назад

plastic parts?...

@JohnsWoodenShips 10 месяцев назад

The dead eyes and blocks as you have seen, have been already replaced with wooden ones. That leaves the boats but it too early to think how i will do that.

@n6jwp 10 месяцев назад

This may seem like a silly question but where did you purchase this kit?

@JohnsWoodenShips 10 месяцев назад

It is not silly, here are the dealers around the world : docs.google.com/spreadsheets/d/e/2PACX-1vRAtwJ_zRtLt_ZGwJhIZhJmnwCN1NeriVqQFhgdNyiQJdlQQBV61QWztBf5RNZUOEkZnXWTjbYIVQ0C/pubhtml?gid=1111919947&single=true