Тёмный

CV Axle Replacement Mercedes-Benz GL450 (2013-2019) 

Brownsburg Motorsports
Подписаться 1,7 тыс.
Просмотров 16 тыс.
50% 1

Welcome back to our channel , in this video we demonstrate the process of replacing the front driver CV axle on a 2014 Mercedes GL450. If you're experiencing clicking noises, vibrations, or other issues coming from the front axle, this tutorial will guide you through the replacement procedure.
If you find this video helpful, please like, comment, and subscribe to our channel for more automotive repair tutorials. As always, consult a professional if you are unsure or uncomfortable performing this repair yourself.
Note: The specific steps and procedures may vary depending on your vehicle's model and configuration. Always refer to the manufacturer's guidelines and consult a professional mechanic if needed.
12 point metric socket set from harbor freight:
www.harborfrei...
Front Driver CV Axle from Napa:
www.napaonline...
Instagram: ...
Tiktok: / brownsburg.motorsports

Опубликовано:

 

14 окт 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 45   
@PowderSpecialties-re6jd
@PowderSpecialties-re6jd 9 месяцев назад
I liked the video because it was very well explained which is important for these types of videos.
@brownsburg.motorsports
@brownsburg.motorsports 9 месяцев назад
I am glad you like it and thank you for watching!!
@EdCosta-l5u
@EdCosta-l5u Год назад
Very well done. Great tips when assembling and disassembling. I appreciatte the great camera angles.
@brownsburg.motorsports
@brownsburg.motorsports Год назад
Thank you so much!!! I am happy the video was helpful 😊
@EddTooReal
@EddTooReal Год назад
Video was helpful! Thanks! I don’t usually comment but I was gonna redo this job on my GL450 bc of the inner part wasn’t sitting flush. I’m glad you recorded that last part ! Saved me from redoing the job for no reason!!!! Thanks again 👍👍👍👍
@brownsburg.motorsports
@brownsburg.motorsports Год назад
Thank you for watching and I am very happy the video was helpful!
@Call_Me_Zay
@Call_Me_Zay Год назад
Thanks for the upload! I changed my front air struts and damaged the threads on the axle trying to get it to break free from the rotor. I tried to chase the threads but I made it worse. Looks like I’m going to order the axle and swap it out. Looks fairly easy, thanks again for the tutorial!
@brownsburg.motorsports
@brownsburg.motorsports Год назад
Most Definitely! And sorry to hear that 😓 yes if you changed the strut by yourself you should be able to get the axle replaced as well! Good luck and let me know if you need assistance 🙌🏽
@Dadyyll
@Dadyyll 11 месяцев назад
Great video! Thank you for sharing! I’m about to change it on a GLE W166 2017
@brownsburg.motorsports
@brownsburg.motorsports 11 месяцев назад
Most definitely! Glad the video is helpful!!!
@torontoonline
@torontoonline 2 месяца назад
beautifully explained and great camera angle..
@brownsburg.motorsports
@brownsburg.motorsports 2 месяца назад
@@torontoonline thank you 🙌🏽🙌🏽
@bradleybarbato5620
@bradleybarbato5620 7 месяцев назад
Thanks buddy, had no idea I need to slam it in like that. Hope it will work tomorrow. That little c clip. Did not want to damage.
@brownsburg.motorsports
@brownsburg.motorsports 7 месяцев назад
You are most then welcome! Glad the video was helpful! And good luck today with the repair 🙌🏽
@angelho5913
@angelho5913 9 месяцев назад
太強大了,謝謝你清晰的介紹!讚!
@thefearonshop
@thefearonshop 7 месяцев назад
Very nice video but, How do you disable the air suspension i have a 08 model! Thanks in advance
@mikimiki195
@mikimiki195 Год назад
I’m getting ready to do my tell me if you have to tighten bottom big strut bolt when wheels are touching the ground so bushing doesn’t go bad. And what is the torque spec on 36mm axle nut? Thanks
@brownsburg.motorsports
@brownsburg.motorsports Год назад
It’s better if you let it touch the ground before tying it completely! The torque spec I will check for you and comment it soon!
@lumberjackdreamer6267
@lumberjackdreamer6267 4 месяца назад
Would that be a good opportunity to drain/replace the front differential oil? It takes about 0.8 liter, spec MB 239.72
@josephvallejo4683
@josephvallejo4683 Год назад
Do you have to turn off the air shock before removing the control arm or the lower arm ?
@brownsburg.motorsports
@brownsburg.motorsports Год назад
Any time you have to raise the vehicle You have to disconnect the battery if your car is equipped with Air Shock correct!!! Hope this video is helpful and would definitely appreciate a new subscriber!!
@kakashi_copyninja7
@kakashi_copyninja7 7 месяцев назад
Great video sir! Where is your shop located?
@brownsburg.motorsports
@brownsburg.motorsports 7 месяцев назад
Thank you! We are located in Indiana for more details text me on insta or TikTok 🙌🏽
@RJTillRacing
@RJTillRacing 3 месяца назад
Did you need to release the air from the air suspension prior ot doing this job? .
@brownsburg.motorsports
@brownsburg.motorsports 3 месяца назад
@@RJTillRacing best thing to do is either put the air suspension in service mode with a professional scanner if not then disconnect the battery and lift the car!
@AlejandroEscalante-y3w
@AlejandroEscalante-y3w 18 дней назад
Do you think its the same steps for an ml 550 4 matic 2013?
@brownsburg.motorsports
@brownsburg.motorsports 18 дней назад
@@AlejandroEscalante-y3w the steps should be very similar!
@domohana1319
@domohana1319 5 месяцев назад
I just did a cv replacement on my 2017 c300 and i followed your steps, but now my transmission wont switch gears any idea why and how to fix?
@brownsburg.motorsports
@brownsburg.motorsports 5 месяцев назад
Check to see if the axle is fully installed to the front differential / trans and, was there any leak when you removed the old axle?
@goddess1700
@goddess1700 Год назад
hi would a 20 volt impact wrench work to remove the nut ?
@brownsburg.motorsports
@brownsburg.motorsports Год назад
It depends on the torque it has!
@sunnyg2977
@sunnyg2977 Месяц назад
How do you put this in service mode or turn off air suspension?
@brownsburg.motorsports
@brownsburg.motorsports Месяц назад
@@sunnyg2977 if you have a professional scanner you could go to hot functions and put it in transport mode / Service mode if not just disconnect the battery before you start and connect it back once it’s back on the ground!
@mikimiki195
@mikimiki195 Год назад
Do you have to do alignment after axle replacement?
@brownsburg.motorsports
@brownsburg.motorsports Год назад
No you don’t!
@mikimiki195
@mikimiki195 Год назад
@@brownsburg.motorsports thank you sir this was great video
@brownsburg.motorsports
@brownsburg.motorsports Год назад
@@mikimiki195 Glad the video was helpful and thank you for watching! Please subscribe for more content 🙌🏽 Much appreciated!
@aceyorba
@aceyorba Год назад
Did you use aftermarket or mercedes replacement cv axles??
@brownsburg.motorsports
@brownsburg.motorsports Год назад
I am pretty sure we used replacement OE from Nappa
@brownsburg.motorsports
@brownsburg.motorsports Год назад
Link for the part is in the description!
@ntz2652
@ntz2652 Год назад
Hi, for the ML W166 350 diesel 2015, it is the same axle?
@brownsburg.motorsports
@brownsburg.motorsports Год назад
I doubt it honestly the best way would be to go to any parts store and give them your vin number and they will be able to look it up for you and get you the right part
@007balzak
@007balzak 5 месяцев назад
I was told that you must follow the torque (Nm) to the dot??
@brownsburg.motorsports
@brownsburg.motorsports 5 месяцев назад
That is correct when you are replacing the bolts with new ones
@serdarcaglar377
@serdarcaglar377 3 месяца назад
👏🏼👏🏼👏🏼👏🏼👏🏼👏🏼🧿🧿🧿🧿