A friend of mine just did one today and it was successfully done he did not red the eeprom under st he red it under microchip then prepared the chip with vvdi 2
Darius , i thing in this case that is possible VVDI prog to didnt read corect eeprom.It is good for Mcu reading ,but for eeprom job i use it very rarely .Did you compare two dumps after from Vvdi and Zedfull ?
Hello. Good question ! I didn't compare it. May be you are right and the reading of VVDI was not good in this case. But I love this programmer, it is always my first use.
I did a key with mini pro and xhorse vvdi mini tools. Write key with super chip on unused spot cause with the used spot can't write file. Car security gets off but car isn't starting. What should I do?
@@schluesseldienst_muzler_de4067 Autel's IM608 doesn't do it, been there and still have issues with the car, I'm going to buy ZedFull Plus just now to see if I can get the car out this week.
Hi Great Video 🙂 Today I take Terios 2004 》 93LC66 》 4c 》 Take Dump File 》import to VVDI2 key making 》import file notice unsupported version notice 😐 I made with Autel + XP400 Still it would be good VVDI2 could write 4c tiris key , did you ever try Terios 4c with VVDI Prog & VVDI2 ?
@@alexfurman4137 you need to FFFF immo box or do FFFF thru obd then insert 2 new 8c transponder and switch on ignition... immobox auto learns new transponder and car start
Hello Muhammad. If you do this job in 5 minutes you are not from this world. If you program a key to a car by OBD in 5 minutes you are from this world.
