Daikin ONE Smart Thermostat | Installation How-to | Daikin One Ep.3 (12-31-2020)

Подписаться 6 тыс.

Просмотров 6 тыс.

50% 1

In this episode we'll discuss how to install the Daikin ONE Smart Thermostat with Translation Adaptor for Mini-split and VRV Systems.
Installation preparation and setup discussed in the first half of the video, there are a few important components to look out for to ensure a smooth and successful installation.
To jump ahead follow below time stamps:
Installation Step 1 - Mounting the Translation Adaptor - 07:57:00
Installation Step 2 - Wiring Line Voltage Cables - 09:42:00
Installation Step 3 - Wiring Communication Cables - 10:37:00
Final Installation Step - Wiring the Translation Adaptor to the Daikin ONE Smart Thermostat - 11:19:00
Thanks Everyone and I hope you find this video helpful! If you have any comments, questions, or ideas for future videos please do not hesitate to comment below, I value all your input.
Help me get to 1,000 subscribers! A few of my videos have over 100 views here at the end of 2020 and the majority of these views are from folks who are NOT subscribed. Share with your friends and help spread the word!
Happy New Year!!!
#DaikinONE
#DaikinThermostat
#Daikin

Опубликовано:

16 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 36

@Dobie_ByTor 4 месяца назад

It’d be nice to see a troubleshooting video for testing voltages and communication compliance for systems and common issues and gotyas installing and commissioning the system.

@InverterAlways 4 месяца назад

Related to the stat or just in general? We can definitely do a video like this. 👍

@kirkfoutts5586 2 года назад

Great video! Extremely helpful. My system fan runs very slow with AC. When on heat, the air will blow some of the magnetic vent covers off, when on AC you can barely feel any air coming out. I have read that more air can raise humidity but I do need enough air movement to cool the house. Is there a fan range/speed setting for AC and Heat?

@nicklim7709 3 года назад

Good Product ! Can this convert P1P2 signal become S21 signal ?

@darks8587 3 года назад

does this work with a daikin ftq18tavjuaaa unit? and where can you get one of these?

@ravinbechan9186 2 года назад

Please advise asap 5 ton Daikin VRV IV HEAT PUMP mini split 5 head system can Iuse Daikin one t stat 1 controller to control 5 indoor unit

@InverterAlways 2 года назад

Just answered this on your other comment. Yes, but will all be controlled as one group. Same set point same fan speed same on/off etc. Only ideal when they are all in the same room. If in different rooms use separate stats.

@shanegrant8836 2 года назад

Can the One+ thermostat be used in systems with DZK attached to concealed ducted units? Like an FDMQ using a DZK to supply to three zones?

@InverterAlways 2 года назад

No. The dzk stats take over full control of the unit.

@willhernandeziam 2 года назад

My mother in law has one of these but lately the screen went to a plain white screen, any help please

@InverterAlways 2 года назад

Plain white screen? Hm first I've heard of this happening. You try rebooting it (remove from wall and snap back in)?

@willhernandeziam 2 года назад

@@InverterAlways is there a special way to remove the face off the wall?

@InverterAlways 2 года назад

@@willhernandeziam just pull straight out don't twist. There's pins on the back that snap into the wall plate

@willhernandeziam 2 года назад

@@InverterAlways well thank you very much it started to once again not sure why it went to a blank white screen, thank you so much.

@quadcamera 3 года назад

how do you calibrate the thermostat after install? My dealer didn't calibrate it and it's about 4 degrees off. Looks like I need a 4 digit code to access the calibration adjustment.

@quadcamera 3 года назад

@@InverterAlways Thank you. I never would have found that "i" in the corner. I need to add +3 to the displayed temp to make it accurate. Worked perfectly.

@quadcamera 3 года назад

@@InverterAlways Do you have recommended deadband and overcool settings for high humidity area (i.e. Florida?) I narrowed the deadband to 3 and set the overcool to 1. Just been experimenting. started with 4/2 and then went to 2/0. Any advice is appreciated.

@quadcamera 3 года назад

@@InverterAlways sorry. I have the FIT 3.5 ton. DX17VSS421

@thedude2897 Год назад

@@quadcamera Get everything to how you like it? I'm in Florida too and just had one installed. Humidity levels are running too high sometimes. AC company calibrated it and still not good enough.

@quadcamera Год назад

@@thedude2897 I did get everything the way I Iike it. I use the overcool feature to pull more humidity out of the air. My humidity usually stays in the 50-52% in the summer and fall.

@kellyirwin8972 3 года назад

I'm a red seal hvac/r tech. By far the worst thermostat I've ever come across. Not user friendly for average person.

@justinjones143 2 года назад

Why don't they just put parameters in the manual like honeywell. Also the app doesn't have all equipment and the people on the phone are kinda useless

@InverterAlways 2 года назад

What parameters are you referring to? Who are you referring to on the phone Daikin tech support? They should be able to help no problem you can also reach out to your local supplier for support as well.

@Lawrenced57 8 месяцев назад

Nice video. Thank you. But can you please stop the music. It takes away so much from what you are saying, interferes with what you are saying, and sorry, but it's so boring and repetitive.

@InverterAlways 8 месяцев назад

There was a couple videos that added music. Sorry. Most of my videos do not have music though. Thank you for the feedback I'll try not to add it too often.

@ЮтюбПетрович 2 года назад

too much problem with that system

@InverterAlways 2 года назад

What issues are you having? Most of the time objectively it's something in the setup that gets missed or over looked or it gets wired incorrectly. I've had literally zero issues myself ever setting these up.

@ЮтюбПетрович 2 года назад

@@InverterAlways the setup system is quite complicated. There are no common standards with competitors. Technical support is slow. Did the install this week. Error E77. I checked everything, the system did not start. Tech support couldn't help. Time to set up the system is spent more than competitors. I'll check your channel maybe I can find something usable for that situation.

@InverterAlways 2 года назад

@@ЮтюбПетрович the first one or two take a bit longer just like anything. Once you're used to it and familiar with it should only take a matter of a few minutes to set up. 1. Pick software package type. 2. Set up wifi. 3. Select equipment. 4. Set any parameters like field settings if applicable. 5. Done. What product did you connect the stat to? E77 do you mean e7-07? Depending on product it's connected to that code could mean a bunch of stuff.

@ЮтюбПетрович 2 года назад

@@InverterAlways e77 communication wire. We fixed, problem was with a software.

@InverterAlways 2 года назад

@@ЮтюбПетрович cool. Thanks for the heads up.