No video :(

Damn Wobbly Pulley Fixed! 😁

Подписаться 3,2 тыс.

Просмотров 7 тыс.

50% 1

Sup folk!
So here's a little follow up to my latest video as it seemed unfinished to me 😊. For those of you just tuning in, that particular pulley had a .025" taper (in a bad way lol) and was wobbling it's way off of the shaft.
So by utilizing the material I had on hand as well as my new little boring bar I brought the bore diameter out by about .060" and flanged up a sleeve out of some 1/2" copper tubing.
Hope you enjoy and as always...
Thanks for watching!

Опубликовано:

22 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 17

@petemclinc 3 месяца назад

I did the same fix on a vintage Delta Milwaukee that had an aluminum step cone pulley. I made the split sleeve from thin, aluminum sheet.

@Just1GuyMetalworks 2 месяца назад

Sadly, finding new pulleys of the same dimension can be difficult and/or costly. A sleeve is the best option imho 😊.

@RockingJOffroad 4 года назад

Nice fix! Use a dead low hammer to tap on cast pulleys, they shatter very easily, I’ve done it so now I know.

@Just1GuyMetalworks 4 года назад

Or at the very least a block of wood lol. I cringe when I see that too 😬

@Rustinox 4 года назад

Using this copper pipe, you don't have water in the bathroom anymore, but at least you can drill holes.

@Just1GuyMetalworks 4 года назад

Totally worth it 😁.

@johnstrange6799 4 года назад

Nice! That's going to make life easier in the shop.

@Just1GuyMetalworks 3 года назад

Still going strong 😁

@jakeparker1220 4 года назад

Don't store your mic all the way closed. Contracting, and expansion regardless how slight will effect its accuracy. This is only applicable to a 0"-1" mic.

@Just1GuyMetalworks 4 года назад

Thanks! Good call🙂.

@kentuckytrapper780 2 года назад

👍👍👍

@Just1GuyMetalworks 2 года назад

🍻😊🍻

@weldmachine 4 года назад

Hey Chris. Always Love your video,s. Craptastic or Crap Tastic, spell check still does not like it ?? Google quote : the quality of being so crappy that the object is humorous or desireable. That mostly covers it, LOL. Not sure about the use of Copper as a bushing material ?? Might need a replacement at some point. But it is a fix you wanted. Happy you could resolve the problem easily. But that is the reason i watch. You make it happen. Thanks for posting your video,s. Always enjoy. Peter.

@Just1GuyMetalworks 4 года назад

Thanks, Peter. Yeah at some point a proper sleeve might be in order. The concentricity of that pulley was worse than the rotor on the motor 🤣, and that's saying something. But, it's running better than it has most likely for many years and I'm good with that😊. Thanks again 😁.