Danfoss thermostat TP5001 SETUP & MENU

Подписаться 864

Просмотров 17 тыс.

50% 1

TP5001M, TP5001B, TP5001RF thermostat menu:
P01 01 - Manual temperature operation
P01 02 - Schedule timer 5/2 day
P01 03 - Schedule timer 24h
P02 01 - ON/OFF Load compensation is enabled. ON/Off load compensation is a feature of temperature control products such as room thermostats and programmable thermostats.
On/Off load compensation is a proven method of minimising energy use by calculating the demand from a thermostat. As the temperature approaches the required setting, the boiler will fire for shorter periods of time, ensuring a constant temperature is maintained. This not only enhances comfort levels, but also uses less energy. On/Off load compensating products are ideal for use with modern systems in well-insulated houses. Recommended for use with gas condensing boilers. Thermostat prevents boiler working for too long period of time. In this way, the heating works more efficiently, as the return temperature of the heating return is lowered. Condensation is better. Less gas is consumed.
P02 02 - ON/OFF standart operation. Boiler is ON till set temperature is reached.
P03 01 - Normal start control.
P03 02 - Delayed start of heating. TP5001 thermostat includes an optional delay start feature to hold off the heating for a time on mild days when the room temperature at the start of an event is close to the programmed value. Recommended for use with gas condensing boilers in order to use less gas. In other words, it is an economic mode.
P03 03 - Optimised start control. TP5001 thermostat includes an optional optimum start control. This feature allows you to set the time at which you require a room temperature by. The thermostat then calculates how soon before the event time the system must be turned up to ensure that the room is at the temperature by the required time. Heating can be started maximum 120 min before schedule.
P04 - Temperature limitation high
P05 - Temperature limitation low
P06 - Frost protect temperature
P07 - Away mode temperature
P08 01 - Timer display 24h
P08 02 - Timer display 12h
P09 - Service due setup. Installer setting only
P10 00 - RF Pairing mode OFF (TP5001RF only)
P10 01 - RF Pairing mode ON (TP5001RF only)
P11 01 - Auto daylight saving ON
P11 02 - Auto daylight saving OFF
Old code numbers
TP5001M 087N7930
TP5001B 087N7931
TP5001 RF + RX1-S 087N7934
New code numbers
TP5001M V2 087N7935
TP5001 RF + RX1-S V2 087N7936

Опубликовано:

3 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 70

@karenchapman2387 2 месяца назад

This was a great help just moved into new home and no instructions

@heatingsolutions123 2 месяца назад

Thank You for watching!

@MLabeeq 8 месяцев назад

Thanks for sharing. Was really frustrated with my new home thermostat setting and this video is the only resource on internet that was helpful :))

@heatingsolutions123 8 месяцев назад

Good to know. Thank you! :)

@johncarry5989 5 месяцев назад

Thank you for making this video. I can now use my heating properly. What a ridiculously overly complicated device this thermostat is.

@heatingsolutions123 5 месяцев назад

Glad to help

@00Darkchild00 21 день назад

Thank you! So complicated the instructions didn’t say we needed to hold M to “turn on” the timer function option 2 then holding thing timer button works to set the time events

@heatingsolutions123 20 дней назад

Thank you for your feedback!

@ShabrinaWilson День назад

Hey so I’ve put my setting on manual, please can you tell me if this is right or what setting I should have it on so I can have my thermostat set to so if it falls below 19 degrees it turns on by itself till it reaches 20 and then turns back off by itself, or is this not how this thermostat works. I don’t want to put it on a timer

@Paristheadorable 15 дней назад

Hi thank you for this great video. I would like to set my heating to stay on from 8am - 10am. Whilst I understand that there is the option to turn on the heating at a specific time, I am unsure if there is a setting that allows you to select the duration of the time the heating stays on ie 2 hours in my example? Thank you

@heatingsolutions123 10 дней назад

Hi! Heating will be on from 8am to 10am if set temperature will be higher comparing to real.

@rachaelbuckley7948 16 дней назад

How do you put the boiler on as and when you need it, instead of setting day and times, it's very rare I heat the whole house when my son is in school, I've not long moved in

@rachaelbuckley7948 16 дней назад

I've set them all at 01, is that right

@heatingsolutions123 10 дней назад

Setting P01 at 01 means you have manual mode. Heating will be ON if set temperature is lower comparing to real. It is more efficient to have schedule.

@marthal9388 6 месяцев назад

Very difficult thermostat to understand the operation, even though you explained it very well I blame the manufacturers.

@heatingsolutions123 6 месяцев назад

Less sophisticated would be not programmable. Such as RET 1000 or RET 2000

@brendanwong4140 9 месяцев назад

Very helpful thank you!

@heatingsolutions123 9 месяцев назад

Glad you liked it!

@MrRogez 4 месяца назад

Hi thanks for taking the time to make these videos. I have 02.3 on my screen… do you know what that is? I looked at fault codes and can’t see that code In the manual. 👍🏻

@heatingsolutions123 4 месяца назад

Hi! Strange... I would recommend resetting, TP 5001 Reset Video is here: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-5fzT1mMkY7g.htmlsi=8XEnOrIMdu7Mc_dI In case resetting does not help - thermostat most probably is broken.

@lynnwebster9764 4 дня назад

We're in a new home and this thermostat is the worst we've ever come across, the on/of button is jammed on frost protection mode 5 degrees and can't get it off or reset any advice please

@heatingsolutions123 4 дня назад

@@lynnwebster9764 not sure if this would help. I would try to cut off electricity for thermostat, with main power switch. While thermostat is off would be good to push any buttons on thermostat to drain electricity inside. And then power on. If on/off button is jammed and there is no way to fix it, you need a new thermostat then.

@lynnwebster9764 4 дня назад

@@heatingsolutions123 thank you, I think we need a new thermostat, to be honest we think we will get a completely different system as this is an absolutely terrible system. So many flaws

@heatingsolutions123 3 дня назад

@@lynnwebster9764 and there might be something else also. Wrong wiring, boiler setup …. Hard to comment. Off course I would start from changing thermostat as it’s button is stuck.

@yousafahmed7657 7 месяцев назад

I have this same thermostat. I am not able to manually increase nor decrease my temperature. It just stays on the same number all the time and the heating icon does not come on. My downstairs one is working fine. Can you advice what I can do please

@heatingsolutions123 7 месяцев назад

I would try reset, here is a video on it: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-5fzT1mMkY7g.html

@markredfox73 10 месяцев назад

Just want it to use manually with no timer how do i switch heating on and off?..its a ridiculous over complicated system.thanks

@heatingsolutions123 10 месяцев назад

Hmm, it is easy:) Just hold "M" for 6 seconds and on P01 select 01. Have you wached the video? :)

@leannemoore2620 8 месяцев назад

Mine is set to 20°c on highest temp, no schedule, but its still rising to 24°c 😫

@heatingsolutions123 8 месяцев назад

Probably wrong installation or thermostat is broken :(

@123ls3 10 месяцев назад

We just moved in and have this thermostat unfortunately. I cant tell if it's on and heating or it's off. How do i tell if it's heating?

@heatingsolutions123 10 месяцев назад

"Waves" indicate heating is on. Thermostat is calling for a heating. No "waves" no heating. For beginnig to understand your house heating behaviour I would recommend to switch the thermostat to "Manual" mode - no shedule.

@afolabileshi3179 5 месяцев назад

How do we change to Manual?

@kayleigh16 6 месяцев назад

Mine won't come on at all how do you turn off the timer?

@heatingsolutions123 6 месяцев назад

Hi:) If you really got same thermostat TP5001. Hold "M" for 6 seconds. At P01 SET 01 - (Manual temperature operation)

@Dan-xv4vx 7 месяцев назад

Helpful. My thermostat was flashing e6. I reset it which seems to have got rid of the e6 message. But now our boiler is on all night from like 11pm - 7am. No heating, just the boiler being on and releasing the steam from the vent outside. Any ideas why? Thanks, Dan.

@heatingsolutions123 7 месяцев назад

Usually if heating is not needed, boiler switches to hot water preparation. If hot water is not needed, hot water tank is full of hot water. Boiler goes to stand by mode. If steam goes out - boiler is on. Please check your set temperature and real temperature measured by thermostat. If set temperature is lower you should see waves symbol and boiler should be on. Otherwise boiler should be off (if hot water is not needed) To check if installation is right you can switch from scheduling mode to manual temperature mode.

@Dan-xv4vx 7 месяцев назад

@@heatingsolutions123 thanks. Yes I've currently had it in manual mode for nearly 48 hours which does seem to have it working perfectly fine. So I'm not sure why it wasn't working fine in 5/2 setting.

@JamesTovey-v7u 22 дня назад

How does manual mode work?

@heatingsolutions123 20 дней назад

Manual mode means your room temperature has to be set manually. Usually 22C. And room temperature set point (22C) will not change during a day or a week. If you want to reduce energy usage on night time, or while leaving you have to decrease it also manually.

@shanepatchett4151 5 месяцев назад

Can you only have 4 different times or can you add extra

@heatingsolutions123 5 месяцев назад

4 different comfort and saving times. You can not add more unfortunately.

@afolabileshi3179 5 месяцев назад

I am currently having problem putting the floor heating active. It has been a nightmare

@heatingsolutions123 5 месяцев назад

If heating indicator (waves) are on. Heating should work.

@Hayley-we7qz 7 месяцев назад

Can you only select heating to come on at the times already programmed such as 6.30am and 8.30am. Or can I select different times. I’d like the heating to come on during the night about 3am until 6am

@heatingsolutions123 7 месяцев назад

You can select any time you would like to. How to, is in this video somewhere from 6:30....

@Goody1801 2 месяца назад

I have an E4 error message on mine , will resetting it fix it ?

@heatingsolutions123 2 месяца назад

Resetting probably not. E4 - is RF signal lost. Check if your receiver is on. Get thermostat closer to receiver. Or get thermostat closer and re-pair.

@Goody1801 Месяц назад

@@heatingsolutions123yeah resetting didn’t fix it but I did re pair it easy enough n it’s working fine now , Thanks for the reply 👍🏻

@mariasajkova4412 4 дня назад

I cant turn it on for 24 hours 😖any advice ?

@heatingsolutions123 4 дня назад

@@mariasajkova4412 you need schedule for 24 hours or just stable set temperature? This setting will maintain set semperature with no changes: P01 01 - Manual temperature operation This setting will let you make own temperature schedule with comfort and economy temperatures. All week days will be with same schedule: P01 03 - Schedule timer 24h

@exquisitegarcia4405 9 месяцев назад

Hi there, I have a Danfoss Tpone thermostat. My thermostat starts my scheduled heating 3 hours before my programmed time I’m assuming it’s preheating. for example, ( 7am - 11am for 21 is my scheduled heating time) the thermostat will activate hours before my programmed time which I do not want. Please can you tell me how I can set my thermostat to start at my programmed time and not preheat in advance? I have these modes - normal start, delayed start and optimised start. - Thank you so much.

@heatingsolutions123 9 месяцев назад

Hi, please select "normal start".

@user-gv9jv5sp7s 8 месяцев назад

Hi, I have a combi-boiler and I’ve set my thermostat to timed mode (5/2) with the following: 07:00 - 18C 10:00 - 18C 17:30 - 19C 21:00 - 19C However, after event 4 (21:00), the boiler still switches when the temperature goes below 19C. Is this normal as I expect no heating after 21:00. Is the boiler not meant to turn off after 21:00 overnight and not come back on until 07:00? Thank you!

@heatingsolutions123 8 месяцев назад

Might be you are using P02 01 - ON/OFF Load compensation is enabled. ON/Off load compensation is a feature of temperature control products such as room thermostats and programmable thermostats. On/Off load compensation is a proven method of minimising energy use by calculating the demand from a thermostat. As the temperature approaches the required setting, the boiler will fire for shorter periods of time, ensuring a constant temperature is maintained. This not only enhances comfort levels, but also uses less energy. On/Off load compensating products are ideal for use with modern systems in well-insulated houses. Recommended for use with gas condensing boilers. Thermostat prevents boiler working for too long period of time. In this way, the heating works more efficiently, as the return temperature of the heating return is lowered. Condensation is better. Less gas is consumed. Please try setting: P02 02 - ON/OFF standard operation. Boiler is ON till set temperature is reached. And setting: P03 01 - Normal start control.

@Cactiii8888 10 месяцев назад

Mine is set at 35, how do I reset it, my light is always on and when I press all the buttons nothink is changing , does this mean it’s broke?

@heatingsolutions123 10 месяцев назад

Try to push and hold ON/OFF button till it restarts. All symbols on display should be visible. Honestly, I do not think it will help. Looks like it is broken.

@mici835 9 месяцев назад

I still do not understand. 😒

@heatingsolutions123 9 месяцев назад

Hmm, what exactly... Could you describe?

@chanellebrits 8 месяцев назад

Who do I contact if it’s still not working after all this

@heatingsolutions123 8 месяцев назад

Please contact maintenance company, installer or local Danfoss.

@jummyomojola835 9 месяцев назад

Can this connecetd to the phone to swict thr heating on and off

@heatingsolutions123 9 месяцев назад

This one no. TP5001 does not have internet. There are other thermostats with App connectivity: DEVI Smart, Danfoss Icon, Danfoss Ally, TP ONE.... Depends what would you like to control.

@Simon-te7ww 10 месяцев назад

Good afternoon, can you do a video how to install a receiver TPOne -S for boiler ?

@heatingsolutions123 7 месяцев назад

Hi, do you have code number?

@Simon-te7ww 7 месяцев назад

@heatingsolutions123 087N785600 i dont get any radiators downstairs and the wifi connection drops constantly. RF pairs with receiver ok.

@shaydog8851 10 месяцев назад

I have my temp set to 35’c however my heaters arnt turning on and the temp is staying at 16’c what have I done wrong. (It set on manual mode)

@heatingsolutions123 10 месяцев назад

From thermostat side in case you see "waves" heating should be on. Otherwise something is wrong with wiring. Try to go below 16C, and check is heating started. This would mean you need to connect from NC to NO or from NO to NC. COM on both cases should be connected.