Darktable 4.8 The EPIC Colour Equalizer Module

Подписаться 8 тыс.

Просмотров 3 тыс.

50% 1

Darktable 4.8 The EPIC Colour Equalizer Module
Download the RAW files: Darktable 4 8 The EPIC Colour Equalizer Module drive.google.com/drive/folder...
Patreon Exclusive Members Videos & Articles: bit.ly/2SwaSZ6
Darktable, a free Lightroom alternative, has been updated to Darktable 4.8, and has a new EPIC Colour Equalizer module that offers more control than the HSL/Colour Mixer in Lightroom.
Chapters:
00:00 Intro
02:17 Dragonfly - process start
03:25 Colour Equalizer - mask preparation.
07:50 Colour Equalizer controls (working a bit by trial and error, as no support documentation exists at this time).
16:32 Seascape Composite Module - strange thing this is, and not what I thought it was!
20:23 Seascape One Shot Process instead, using a couple of Colour Equalizer instances.
==============================================================================
PLEASE help support this channel by liking, subscribing and commenting - it really does help!
Joining my Patreon Channel / andyastbury helps me even further, plus gets you access to an ever-growing amount of exclusive member's only content.
You could donate to the channel by clicking the 'Thanks' button under the video, or by PayPal at tuition@wildlifeinpixels.net
Many thanks to all the people who help out already - seriously, THANK YOU ALL.

Опубликовано:

23 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 32

@AndyAstbury 14 дней назад

Forgive the callout placement errors at around 13:00 and 21:00. I have not looked at the canvass extension module because, to be honest, there are far easier and more intuitive ways of doing this job in other software. As for the composite module behaviour, perhaps it IS for producing FAKED double exposure type images; the lack of module documentation just leaves us in the dark

@danielspenner3683 14 дней назад

What is fake about exposure blending, when it just reproduces, what the eye could see on location?

@AndyAstbury 14 дней назад

I said DOUBLE EXPOSURE - that's not exposure blending. But I'm not actually sure the module is working as intended on my mac installation; so hopefully the module documentation will clear the question up - once it arrives.

@Giles29 14 дней назад

I can see a couple uses for this, but GIMP actually does this better - though if the module is improved it may be easier to use this than going over to GIMP.

@danielspenner3683 14 дней назад

In the end it's exactly the same module as the now obsolete color zones Module, except it works in linear RGB. However the effect on colors is more responsive than in color zones. It's a useful ingredient to the scene-referred workflow.

@DarktableLandscapes 8 дней назад

A really handy and intuitive model for sure

@bernym4047 13 дней назад

I agree, the composite and enlarge canvas module don't belong in a raw file editor. Good demo of CE module. Thanks.

@philsmith774 14 дней назад

Thanks for providing the raw files. It really helps me follow what you do, plus I can try "what if Andy did this instead" type scenarios e.g. using sigmoid rather than filmic for example. It's a great learning aid.

@jhmnieuwenhuis 14 дней назад

Thanks Andy, great stuff!

@AndyAstbury 14 дней назад

Cheers Hans

@emrg777 14 дней назад

Nice video Andy. Two quick tips might be when doing a mask such as your insect to maybe try to use the details mask slider. The second is that there is a curve for saturation to select based on chromaticity.. It can target and indicate the areas that eill be impacted...

@AndyAstbury 14 дней назад

Thanks Todd, much appreciated, as I always seem to forget about the details slider. I really have problems visualizing the CZ masking if that's what you are meaning.

@noso-1111 12 дней назад

Andy, I believe that you made the second instance of the color equalizer and its adjustments without carrying over your parametric mask.

@AndyAstbury 12 дней назад

You are correct - I didn't bother because the basic colours targeted only occur in the flower.

@jirinovotny5580 11 дней назад

Thank you for this helpful video🙂

@AndyAstbury 11 дней назад

You are most welcome, and thank you for the contribution, it is much appreciated 👍

@SteveKaluski 14 дней назад

Cool

@ifell3 14 дней назад

Funnily enough, I've just deleted Darktable, now I will have to reinstall it.

@AndyAstbury 14 дней назад

Out of curiosity, what did you delete it in favour of ?

@ifell3 14 дней назад

@@AndyAstbury well I never really used it, used rawtherapy a little bit more and watched more of your videos on it. So I guess it seemed more intuitive. I opened up darktable and the interface/panels just looked flat.

@AndyAstbury 14 дней назад

Rawtherapee is very good, but in all honesty, the multiple module instance and module masking capabilities of Darktable, make DT the vastly more flexible application. As a Rawtherapee fan for about 5 years, no one was more sceptical of DT than me. But it only took me a few days to realise that DT offered me A LOT of answers to the many shortcomings of RT. I still bemoan Darktables absence of a capture sharpening module a la the one in RT - which to me is the best in the business. I also dislike DT's lack of ability to use dcp profiles. But I learned to use DT to get around these problems, one way or another, and if I had to dump one of my FOSS editors it would be RT if I'm honest.

@ifell3 14 дней назад

@@AndyAstbury I'm thinking I should new start watching your 101 videos on DT. I know you can plug RT and DT into gimp, I'm wondering if you could almost do the same with plugging them into each other. But I would highly doubt it. I guess with your videos the DT Devs might get the hint.

@SKTechnologySolution 9 дней назад

Thanks for the update, it's a powerful application & I feel I'm starting to get somewhere with it now. I've appreciated your videos regarding printing but I'm unsure of the settings for printing directly from Darktable. I'm not sure where you set up the paper profile as I didn't want to double up with it in both the software and the printer. Any idea what the settings should be?

@Vicky-il5yv 10 дней назад

I see most people recommends DT. But when I open a raw image its flat on it, but with RT its already close to jpeg/camera setting, and gives a good point to start for editing. Can't we configure DT like that? Whereas when RT saves image I noticed that the DPI changes, like from 370 to 72/96. Why so? Am I missing something?

@Eigil_Skovgaard 14 дней назад

Apparently it's a one man's job to manage the manual, and a rumor talks about a lot of last minute decisions, e.g. the tool Overlay changed name to Composite, all delaying the release.

@VictorForsiuk 12 дней назад

Just wondering where such rumors come from? They have nothing in common with reality. There was no delay in the release, it took place on a pre-determined day (now it is the summer solstice) just like many years before.

@AndyAstbury 12 дней назад

That's how I understood the situation - the app release was not delayed. My gripe is simple; whoever built the colour equalizer tool knows his own reasoning behind the included toolset. These reasoning could easily have been posted to somewhere like GitHub, even in non-English if that were needed; then nerds like me could have got a good idea of the various tools design usage.

@Eigil_Skovgaard 12 дней назад

@@VictorForsiuk I am talking about the delayed release of the Manual.

@Eigil_Skovgaard 12 дней назад

@@AndyAstbury Yes, but apparently someone has been overloaded because everything must be tied up before the final documentation. That's not hard to understand. The hard part is - why didn't they start the process a couple of weeks earlier?

@VictorForsiuk 10 дней назад

@@Eigil_Skovgaard I don't currently see the resources to guarantee the user manual release at the same time as the darktable release. But everyone can contribute to the maintenance of the user manual and help in this.