Josh W. walks through the programming options for the DAS-II security sensor: now featuring built-in glass break detection. #compustar #carsecurity #dasii www.compustar....
I installed my DAS II to the windshield of my car and the 1st heavy rainfall at 2am was frightening. I lowered the sensitivity and it did not make a difference the next heavy rain fall. I have since reinstalled it under the dashboard.
Is the windshield the recommended placement for the Das II I can't find good placement it's not picking up shock well under the dash on my 2019 dodge charger.
Is the only way to adjust this via physical buttons on the actual unit? What a joke design. All your other components are adjustable in the Drone app, but not this one?? Mine is in a hard to reach location under the dash. I get some false window break detections that wake me up in the middle of the night. Big design flaw for Compustar to not make this adjustable with the remote control or drone.
I have set up mine, siren is working like when I unlock the car. when its armed, locked and wait more than 30 seconds. When I bang on the window it does nothing or even shake the car. Not sure whats wrong. The sensor has power.
@@jhorec032611 yep i figured that out eventually. cant get the alarm to chirp upon light impact, the huge long siren/alarm will go off. I think its a setting issue on the das II. Does anyone have settings from modes 1-5 that they can list below that I can use. I also noticed the alarm goes off when it rains heavy.
The biggest question is, why can't one only disable door, hood and trunk latches for alarm? Say I want only glass breakage but no shock or hood and door sensors (they could still function for remote start safety but not for alarm purposes)? My factory alarm covers the doors and hood/trunk. This would lower the chances of false alarms due to dirty hood sensors etc. This would be my ideal setup, but with my 7200, DAS-II, and a manual transmission I can't do it.
past year 21 and up build date dc3 and dasII have not been working for me. stuck to the windshield, tied to harness under the dash, sitting on the floor of the vehicle its all the same sensitivity. follow the master guide set the dasII to H the adjust the dial on the dc3, no change. do the opposite dc3 dial at 10, adjust the das II. I've spoken to authorised dealer support multiple times and they are just as confused as myself. our firstech rep has also had hands on adjusting it himself and same thing. If i use a CMX it works perfectly. any thoughts?
I purchased the das 2 and I have a compustar cm-7200. I installed the shock sensor and when I press the unlock twice and with the ignition on and the shock sensor it doesn’t light up. I found that I have to be sitting inside the car with the door closed and the car in a armed state and the car off then I press the button on the shock sensor and it comes on. Is this normal ?
Hello I have a question i have the dc3 install and a bought a COMPUSTAR RFX-2WT9-FM 2-Way LCD T9 RF REMOTE w. X1-LTE DRONE KIT and Compustar Firstech FT DAS II 2nd Gen DAS Sensor Dual-Stage Shock Glass Tilt II But the alarm 🚨 is the going off do i any anything else installed please help me
Will a compustar cm-7200 work with this shock sensor ? I purchased the other Das and it doesn't work, I originally pulled a dial up shock sensor off it says compustar order# A122
I just bought a kit and thought that it was just plug and play this is the model i buy from ebay Compustar FT AlarmIt Kit V2 Alarm Upgrade Kit Add On with LED Siren & FT DAS II! No instructions included! I really need help on how to install it in my CM-DC3 module!
No, we recommend setting that dial on the DC3 to 10 and setting the sensitivity on the DAS-II. The DAS-II can be adjusted from a 2-way LCD remote or DroneMobile, which is much easier than getting under the car to adjust it on the brain.
@@compustaronlineI have a two way remote and drone mobile, yet neither of them allow me to change the sensitivity settings of my das-ii. Is there something that I need to enable to be able to do that? My install was done with the 9113AS kit.
@@karlmcclure5249 yes, so for me I turned on the car like actually started the car. I had all doors closed. I had the doors locked and the moment I pressed the button once, everything worked as it should. Lemme know if that works for you.
Just installed the x1lte and from what I’ve read it has the same built in security features that the das-ii has from what I understand. Could you please make a video on how to enable those on the x1.
