In this video I'm continuing the restoration on my 1973 Datsun 240Z. In the last video the car was blasted, primed and also high build primer was applied.
After a few weeks of curing the high build primer it was time to start preparing the car for the final paint job. The complete car and all its parts were block sanded. To see low spots better a dry guide coat was applied. Sanding is needed until all low spots are gone, but you need to stop sanding once you reach bare metal. If there are still low spots after that, means it needs body filler. Sometimes also a few light hammer hits could also help. On all the spots with body filler and bare metal was epoxy primer applied. Doors, fenders, hood and tailgate looked still a bit rough after that step. That's why another coat of high build primer came on for the final fine sanding with 320 grit. After this step the paint had 2 months time to properly cure before the actual paint job. During that time I applied seam sealer and sealed all gaps and everything where water could get trapped. I also installed sound deadening on the inside of the car. It's extra made to be painted, this way I'm having it like it was original.
Right before the paint all surfaces were fine sanded with 400 grit. First the chassis was on the rotisserie to apply the undercoating. Then the car was painted underneath, inside and the engine bay. First one closed layer of the right grey shade was applied, after around 30 minutes 2-3 coats of base coat was applied. I choosed an original Datsun color: Datsun 920 Safari Gold. The color was adjusted a little bit to have more pop, the original one was a bit pale and too brownish. To finish the paint job, two nice coats of clear coat were applied. The car then came off the rotisserie to paint the outside. Once the chassis was done all the remaining parts were painted. For the rear panels, spoilers, grille and wheels I picked a nice anthracite called Daytona Grey. All these parts were covered by a matte clear coat. The dark parts fit very nice with the mustard yellow ones in my opinion, they have a very nice contrast.
This was such a big journey to come to this point and I'm very happy to finally have the car painted. It took 48 days of work for all the work you can see in that 13 minutes video.
I hope you like my work and enjoy the video.
Thanks to Glasurit for sponsoring all the paint:
www.glasurit.c...
Huge thank you to all of my Patreon supporters and especially to:
Adel AlSaffar
Alfonso Baz
August Kupfer
Ben Burns
Sigoss Family
Brenna Redpath
Chris
Chris Walter
Colten Hazelip
Daniel Shaw
David Lehnus
Edward Conway
Huard de la Marre
Jennifer K
John Shebanow
Joseph Kamps
Josh Ledford
Joshua Scher
Kar
Kerem Yollu
Kyle O'Keefe
Lambda GPU Workstations
Lorraine Hughes
Marcus H.
Mark Tesmer
Mellissa Marcus
Michael Fleisher
Mo B
Nathaniel Jack
Nick Houston
NoLoneSurvivor
Peter Cyprian
Peter Pearson
potokslow
ReddDirt
Ryan Pickett
Stefano Di Biase
Stephen Buggy
StevenVR
Tyler Carruth
Vickie Bligh
Vince Valenti
Yale Baker
Aidan P
Albert Siemers
Alex Manning
Andre
Andrew Thomas
Arlekino
Arni Bjorgvinsson
Arnon Shimoni
Ben Simmonds
Big Ole' Bran
Bobcat Johnson
Bonnie Williamson
Brett Pitts
Brian Hoerl
Briscolone05
Bruce Boschek
Caleb Betczynski
Chad Bryant
charader
Charles D
Chris Faehl
Chris Visscher
Christian Fjelldal
Damien Fuller-Sutherland
Daniel Thoenen
Daniel Varga
Dave Hardware
David Chang-Yen
David P Hruska
David Thompson
Derson Jacomini
Dustin Davis
Erik Nordby
Flo Sauter
Gareth Rimmer
Haze Skunk
Jack Curry
Jacob Hamm
James Hare
Jeff Keener
Jeremy Cole
Josiah Brown
Joël Franusic
Justin Miller
Kiro Ivanovski
Laurent Bolli
Leevi Kontkanen
Marc Cerisier
Mary Casella
Matthew Johnson
Matthew Mitchell
Max Johnson
MDC
noertap
Norbert Spaar
Panagiotis Mavrommatis
Rania Zainalabedin
Raoul Kriesi
repülő búgás
Roan Fryer
Rob Sherfick
Robert Landrum
Ross Clark
Scott Brooks
Scott Marshall
Sean Welgemoed
Sparrow
Spencer Kormos
Stanley Dimant
Stefan Heymanns
Svenja Kuckla
Taylor Stimpson
Thanny
Tim Holt
Timofey Lychik
Trevor Kam
Tucker Ifft
Warren Mingo
wdwfan78
William
Sorry for my bad english, it's not my language. I try my best to improve my technical english.
Thank you for watching :-)
„I make a new one“ T-Shirts:
teespring.com/...
My Second Channel:
/ mymechanicsinsights
My Patreon Page:
/ mymechanics
8 сен 2024