DBW Injector Replacement | 2006+ Honda S2000

Подписаться 14 тыс.

Просмотров 9 тыс.

50% 1

Hi everyone! Today I’m going to show you how to replace the fuel injectors on a 2006+ Honda S2000.
Follow me on Instagram for more Honda S2000 content: / diyguystv
Tools/Parts necessary:
10mm socket + ratchet
Flathead Screwdrivers
Engine Oil
Pliers
Lower o-ring (optional): 91302-PNA-003
Upper o-ring (optional): 91301-PLC-000

Опубликовано:

16 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 39

@bobbyrios2k223 3 года назад

I love watching these. I dont even need to do this. So easy to do and you make these vids simple to follow, no bullshit. You sir are a gentleman and a scholar

@DIYGuysvideo 3 года назад

Aw thanks

@themikepotter 2 года назад

Another great video I used to diagnose my CYL#3 misfire. Turned out to be a bad injector. Replaced with all new OEM injectors and the car feels much quicker than before. Replaced at 188k miles.

@itr522 3 года назад

Thank you for adding to your super-helpful library of how-to videos. They are simple, clear and straight-forward and has really helped me plan and tackle my own jobs. One question I have is when is recommended replacement of injectors or typical symptoms of perhaps needing to take a look at the fuel system? Thanks!

@TheChannel1978 3 года назад

Same here. Long-term s2k owner here and the author of these videos really does the community a big service by making these very well made videos. THANK YOU

@1st_Gen_Life 3 года назад

Love how you get the most out of your stock parts and only upgrade when your stock part has reached its limit

@JJ-dz2ne 2 года назад

Dude thank you so much for making these videos!

@porteuni 2 года назад

Awesome video straight forward! Thanks for the tutorials !!

@Apollo_s2k 3 года назад

YESSS! Thank you for this finally a good fuel injector install video!! Also quick question is the process similar for an ap1 s2000?

@DIYGuysvideo 3 года назад

The general process is the same but the injectors are different as well as the fuel rail. Different enough that I wanted to make a separate video.

@Apollo_s2k 3 года назад

@@DIYGuysvideo Understood, I’ll be looking forward to that video.

@alexlai2580 Год назад

Look forward to non-DBW injector video!

@giyoon215 3 года назад

Great video! I realized 06-up looks a lot different from my 04.

@DIYGuysvideo 3 года назад

Yea it does. That’s why I made a separate video for it :)

@gotembro 3 года назад

Where did you take them to get cleaned at? Also what are your thoughts on just buying fluids like seafoam or injector cleaner vs sending them out

@gotembro 3 года назад

I had a misfire last week i thought it was my coils or my plugs bought brand new ones reinstalled; still misfire codes. It turned out to be my e manage had a lose ground with my ecu making the car run like shit. Now i have new coils new plugs and i bought a bunch of injector cleaning as my thought that was the next thing. I was also thinking it might of been bad gas. All my old parts were fine. You live learn and spend money

@DIYGuysvideo 3 года назад

I actually haven’t sent them out yet but there is a company in LA I plan to send them to. RC injector is the company I believe. I have no opinions on seafoam or fuel injector cleaner. Never tried them.

@rolandotillit2867 3 года назад

Much easier and more straightforward than doing it on non DBW cars with return lines.

@DIYGuysvideo 3 года назад

I would say the DBW cars are in general much nicer to work on from a mechanical perspective.

@rolandotillit2867 3 года назад

@@DIYGuysvideo The ability to tune without needing a stand-alone.

@Lukavanraaij 3 года назад

When upgrading your fuel injector, do you need to put a new tune on your car? so that the feul injetors work most efficiently?

@nsltrc 3 года назад

Yet another brilliant, on the money S2K video! With AP1’s at 20 years of age is it worth considering new injectors as a way to prolong the life of the car? My Porsche ownership leads me to think that injector leakage and cylinder washdown is a risk worth mitigating. The OEM injectors are about 500USD for a set. Does anyone know of a cheaper direct replacement to the factory part?

@deanos1993 3 года назад

Good points. I'm also wondering whether ultrasonic cleaning and seal replacement is sufficient or whether its wise to go with new injectors entitely.

@DIYGuysvideo 3 года назад

Personally I haven’t noticed any symptoms or issues with my injectors. I am simply getting them cleaned because apparently that is a prerequisite for getting tuned. Anyhow, it will be interesting to see the flow analysis before and after.

@meshumi1 7 месяцев назад

I love you guys! Any tips on how to do this for AP1s?

@DIYGuysvideo 7 месяцев назад

It’s similar, I should do a video on it at some point but nothing in particular.

@gtothebomb 2 года назад

Hey, can you do a video on how a working PCV should sound when you pinch the rubber tube?

@dea7hr0w 3 года назад

Thank you for this as usual !

@DIYGuysvideo 3 года назад

Anytime

@dea7hr0w 3 года назад

@@DIYGuysvideo do you have a video of diy engine bay cleaning?

@Peter-mm4ot 3 года назад

Are you ever going to do a bump steer kit install?

@DIYGuysvideo 3 года назад

Hmm. Maybe when I lower car on coilovers. I would do it if someone else needed it done on their car though.

@REALISTIKGIAN 3 года назад

E85 conversion would be a nice diy.

@jonathanvaras552 3 года назад

Thx mate!!

@cis2k128 3 года назад

would this be a similar process for a 2001 ap1?

@edwinlongii1808 3 года назад

06+ cars have a return less fuel system, but the overall removal is the same

@DIYGuysvideo 3 года назад

The fuel rail and o ring situation is a little different. There is no quick disconnect for the fuel line. I plan on making a separate video for 00-05.

@alexlai2580 2 года назад

@@DIYGuysvideo wanna do it for my 04? Ha you can film on my garage.