DD15 major overhaul Part 3 cylinder liner installation (English and Español)

Подписаться 21 тыс.

Просмотров 26 тыс.

50% 1

In this video, part 3 of the DD15 major engine overhaul, I will be going over how to install the liners and what you will need.
The liner part number based on the VIN number I am working on is DDE A4720111910. The kit includes the liner, seals (upper and lower) and the carbon scraper ring that sits at the top of the liner.
You will need clean motor oil, you can use the Detroit tool to install your liner which I believe is a J-47407 and runs about $ 350 - $650 or you make your own liner installation tool with something you probably have laying around your shop. You may need to be a little creative, but it works just as well. I got the idea from a friend that did engine work and I am able to use this on other engines.

Авто/Мото

Опубликовано:

11 дек 2020

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 85

@alejandro78155 2 года назад

Thanks, very informative, this video needs more likes!!

@weepweep2225 2 года назад

Enjoying your content man! Really wish you had a rebuild video for a Big Cam Cummins 😂! Thanks for taking time to show this stuff off!

@rudyvelasquez1039 3 года назад

Excelente trabajo maestro un saludo a la distancia desde Guatemala

@axelm7110 Год назад

Man me siento orgulloso de este hombre , mis respetos para este joben señor, espero un dia poder lograr tan buena destreza y sabiduria!!!$🤑🧠💪

@edgarhernandez1060 3 года назад

Hasta me dan ganas de ir aprender mecánica con este guy

@marcbrown8834 2 года назад

Love the video..keep the good work

@CarlosDieselElectric 2 года назад

Thank you

@landonbrown6568 2 года назад

I’m a big fan!

@Pturck786 3 года назад

Very impressive video I never saw this essy video thanks

@CarlosDieselElectric 3 года назад

Thank you

@ty.Tibor123 2 года назад

LOVE the DD15

@joaquinurizar6805 2 года назад

La verdad alque no aprende con este maestraso es porque enrealidad es pendejo porque mejor explicado Como este maestro lo explica creo que ya no se puede creo que este maestro es El mejor Para mi.

@transparenttaxw2autopro821 2 года назад

Good job Maestro

@CarlosDieselElectric 2 года назад

Thank you, Gracias

@mohammadalaboosi3525 Год назад

Amazing job with the videos on the DD 15 build debating if I should pay someone with experience or rebuild it myself Time consuming though

@jorgefacio690 3 года назад

official again count since I started watching your videos 1k and counting....

@jeromerobinson1707 Год назад

Good information

@CarlosDieselElectric Год назад

Thank you

@josereyes7111 2 года назад

Muchas gracias soy troquero y quiero aprender de los detroit my opinion el mejor

@akakiiakakievich9580 2 года назад

Thank you

@erickyadacespedes1820 3 года назад

buen trabajo , solo queria saber donde esta el video #4. Gracias

@carloshuey6831 3 года назад

Where are you all located? I've not been able to find that information just yet. Wish you folks were close to where I am. I've got a situation now, that I'm positive you all could solve after watching a few of your videos. Good stuff!!

@devinbailey6576 Год назад

Any advice for doing my first inframe overhaul

@JameslazyDriver 3 года назад

Carlos great Video again. You never let us down also like the English & Spanish in one Video awesome. Question how much does a Complete overhaul cost on a DD15 ?

@CarlosDieselElectric 2 года назад

An overhaul will cost about $17-20K. For a job like the one in the video where the engine block comes out. The cost is more for labor and machine work.

@ramonmajor334 2 года назад

InstaBlaster.

@abdkaya1600 3 года назад

nice

@dongustv3725 Год назад

Con todo respeto...pero con una palanca de segundo grado apoyada en un tornillo....las camisas entran fácilmente con rapidez y muy seguro......y se siente si va forzada.

@osmanjuarez2734 9 месяцев назад

Hola carlos gracias por tus videos. Una pregunta my amigo tiene una freightliner cascadia dd15, esta filtrando coolant al aceite por los cylinder sleeve o-ring. Se puede reemplasar solo los liners o-ring ?

@CarlosDieselElectric 9 месяцев назад

No lo recomiendo. Especialmente dependiendo en las millas del motor. Pero técnicamente si las camisas no tienen nada y el bloque está bien. Si se puede

@osmanjuarez2734 9 месяцев назад

@CarlosDieselElectric gracias por la respuesta amigo, yo tampoco veo la logica en solo reemplasar los sellos, tenes muy muy buena informacion y apenas descubri tu canal.

@Hitman-ds1ei 2 месяца назад

Did I miss your dry run liner height check ? Failure analysis I've done over years has lead to the highlighting thst if your lubricating seals use vegetable oil or liquid soap of some kind, mineral oils are not friendly to all liner seals, I know the lower ones can be exposed to crank case oil but not all liner seal materials are the same so use something thst is going to be cleaned away by coolant preferably

@CarlosDieselElectric 2 месяца назад

The block is inspected upper and lower. The upper is usually cut for bushings and a liner is installed and measured for protrusion. I don’t do this myself. I have the guys at Engine Saver Reboring (located in Chino, California) come over and perform this. I have heard of vegetable oil or shortening being used on the seals but have never tried this. I usually just stick to what the book says.

@quocbinhduongnt8646 3 года назад

video này của anh để hôm nào em rảnh thì em xem nha anh ơi

@moisescabrera7120 3 года назад

Muy buen video ese..quisiera saber cual es la partes q cellan ...los O rings?....o el lainer cuando sienta en el bloque?

@CarlosDieselElectric 3 года назад

Los dos trabajan juntos. Pero las ligas (O-rings) sellan.

@MarioLopez-kt8dp 3 года назад

Y si de los 6 liners solo remplazo uno que tiene ese anillo y los otros 5 son originales sin ese anillo trabajará bien el motor?

@zaiyerebaraka3947 3 года назад

I am loving your work sr where exactly are you located?!

@CarlosDieselElectric 3 года назад

We are in Montebello, Ca. 90640.

@zaiyerebaraka3947 3 года назад

@@CarlosDieselElectric Wow,I was hoping that you said Texas.I have watched a couple of your videos & love the way that you do your work.

@aqualad2271 3 года назад

Great video! How much did the oem kit cost ?

@thomaskirkpatrick4031 Год назад

The outside of those liners are in the cooling system of the engine, wouldn't it be better to use coolant to lubricate the O rings?

@CarlosDieselElectric Год назад

Good question, I believe the book says clean motor oil so when the oil is applied to the seal it will swell and helps create the seal around the liner. Although I have heard from an old timer to use crisco shortening oil. I have not tried that either. Maybe I afraid if it does go well I’ll have to do it all over again.

@mahmoude8311 10 месяцев назад

@@CarlosDieselElectrichow much this overhaul job costs parts and labor separately please

@wilsonsousa9961 3 года назад

Good job! Did you do the part 4?

@CarlosDieselElectric 3 года назад

I am working on just editing part 4, it will cover the piston assembly, install and torque.

@einstein7526 3 года назад

Just did overhead on a DD13 today... give me a DD13 anyday rather than the MP8.... lol

@raullorenzo6262 2 года назад

Pedro , tú podías instalar las camisas con el motor afuera?

@CarlosDieselElectric 2 года назад

Si claro que si. Yo los instalo ya que el bloque está instalado en el camión.

@omarbencherif3804 3 года назад

God jobs

@CarlosDieselElectric 3 года назад

Thank you

@transport21 3 года назад

How do you know the liner is correct height. When do you know to stop or keep going?

@CarlosDieselElectric 3 года назад

When the block was at the machine shop they check for height protrusion. If the height isn't there then they will machine it so when the liner is installed it will be within factory specs. As for the second question, when you install the liner, it will bottom out and not go in any further. Again, no need to apply pressure beyond the normal, you will feel when it reaches.

@CarlosDieselElectric 3 года назад

If you need the height let me know, I will have to check the book.

@transport21 3 года назад

@@CarlosDieselElectric yes please can you give me the heights. 2016 dd15. Also what tool is needed to check the height? Mabey I can order tool online. Thanks. Is there a way I can email you for questions?

@CarlosDieselElectric 3 года назад

@@transport21 now I don’t know what tools are needed. I would contact a machine shop that is familiar with the tools needed. But let me check on the specs. My email address is carlosdiesel@sbcglobal.net

@user-do4ti9wb1s 3 года назад

Nice, what was the year of the truck? What price for one liner kit? Thanks

@CarlosDieselElectric 3 года назад

Thank you. The truck is a 2015 Freightliner Cascadia

@foltzenlogel 3 года назад

You can find the liners online for about $130 a piece

@user-do4ti9wb1s 3 года назад

Thanks

@deeb1504 3 года назад

@@CarlosDieselElectric What is the engine overhau cost and calibration cost for the turbo?

@CarlosDieselElectric 3 года назад

@@deeb1504 DD15 does not have a turbo calibration. I am working on a video to go over the cost. Hope to have it out soon

@burroughs5252 2 года назад

At what miles should a DD15 get over hauled. My truck has 600,000 miles

@CarlosDieselElectric 2 года назад

You still have plenty of life left on that motor, most trucks will not need an overhaul until they hit 1,000,000 miles. With good maintenance you will be fine. I have done overhauls on engine that have reached 1.1 million miles and in some cased 1.2 million miles.

@blkthunderbolt 2 года назад

Why didn’t you install the liner before you put the block in the truck?

@CarlosDieselElectric 2 года назад

No particular reason for putting the liners in after. Just preference.

@erwincorado6457 2 года назад

Donde están ubicado su shop amigo

@CarlosDieselElectric 2 года назад

Estamos en la ciudad de Montebello, Ca 90640

@matthewhansen5008 3 года назад

What about liner height?

@CarlosDieselElectric 3 года назад

Great question, in my previous video I described the engine block was serviced at Engine Saver Reboring in Chino, CA. They go through the entire block. Hot tank, Line bore, they also check the uppers and lowers the ensure the liner height is spot on. I have had Dan and Justin work on other DD15 engines that I have worked on before and have not had any issues. They are very good at what they do.

@erwincorado6457 2 года назад

Where you guys located at

@CarlosDieselElectric 2 года назад

We are in Montebello, Ca 90640

@landonbrown6568 2 года назад

I’m going ty step out on a limb and ask you a question?🤓What does the metal ring do?

@CarlosDieselElectric 2 года назад

Carbon scraper

@landonbrown6568 2 года назад

@@CarlosDieselElectric does the carbon scraper adjust the liner protrusion?Ive seen some shim up to adjust the liner protrusion with Cat engines for example?do I have to be concerned about liner protrusion?🙂

@CarlosDieselElectric 2 года назад

@@landonbrown6568 no, the liner protrusion is already set within the engine block. All the engines are have done, we have the liner protrusion measured and if it needs to be cut, we have it cut.