Тёмный
No video :(

Decaps in 2024? 

Sloppy Mechanics
Подписаться 135 тыс.
Просмотров 7 тыс.
50% 1

yes, still very reliable when done correctly and verified clean/flowed stock decaps can provide plenty of reliable fuel for 500whp turbo project or even if you have a wild all motor setup.
OG decap video - • Decapping stock LS tru...
second decap follow up - • lets revisit decapping...
=-=-=-=-=-=-==-=-=-=-=-=-=-=-=-=-=-=-==-=-=
Check out SloppyMechanics.com for links to commonly used facets of sloppy.
check out our shopify store, wiring,
www.sloppymech...
if you would like to send things,
and you most certainly do not have to,
but if you are feeling inclined to do so!
please mail to:
Matt Happel
175 N Chestnut St
PO Box #142
Bath PA, 18014
----------------------
Check Out Sloppy sponsors and discount codes from them!
Monkey Fab MFG - (monkeyfabgarag...)
Discount Code "sloppy" for 5% off most items
TorqStorm Superchargers
torqstorm.com/
Snake Eater performance (www.snakeeater...)
Discount Code "sloppy" for 10% off entire store
Reversion Raceworks - Dash Inserts and more
/ reversionraceworks
Use Code "SLOPPY5" to save 5% on whole store
Hunter Tuned - www.huntertune...
Mostly centered around honda parts
use discount code "SLOPPY" to get 10% off
Lowdoller Motorsports - lowdoller-moto...
Discount Code "sloppy" for 5% off the store
Codion Motorsports ( / codion-889312128079667 )
Forced Performance - (forcedperforma...)
Hughes Performance - (www.hughesperfo...)
Holley performance (www.holley.com/)
LSX Specialties ( / lsxspecialties )
Dirty Dingo Motorsports (www.dirtydingo....)
Summit Racing LS (www.summitraci...)
Brian Tooley Racing (briantooleyrac...)
VS Racing (turbo4less.com/)
Warr Performance (warrperformanc...)
ICT Billet (www.ictbillet....)

Опубликовано:

 

26 авг 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 51   
@TexasGTO
@TexasGTO 6 месяцев назад
Take a drink every time he picks up that one injector...
@StationroadRatrods
@StationroadRatrods 6 месяцев назад
Time of death, 54 seconds
@mrpfuelinjection5762
@mrpfuelinjection5762 6 месяцев назад
I dhek jxhe Anne slat 😂
@punksrfr
@punksrfr 5 месяцев назад
The final 10 seconds of audio is gold😂
@Sleeperdude
@Sleeperdude 6 месяцев назад
Ran decapps for years on as much as 26psi boost. Never had a problem
@AaronHardinPhoto
@AaronHardinPhoto 6 месяцев назад
Man I'm still rocking decaps. Two years running in the daily. I still can't seem to trim out enough at idle on pump gas. E85 is totally fine, but I guess the resolution just isn't there in my set for that little of fuel 🤷
@crashtke
@crashtke 6 месяцев назад
Rocked decapps on my 2.0 WRX on e85 back in the day. Worked great!
@johnvirgilsgarage
@johnvirgilsgarage 6 месяцев назад
I've been using Eric for the last 4 years, dude is awesome to work with 🤙
@Seemego4WD
@Seemego4WD 6 месяцев назад
He is awesome cleaned some injectors for me. Quick turn around and great service
@StationroadRatrods
@StationroadRatrods 6 месяцев назад
Woooo decaps! Still have them in my truck and will have them in the nbs I’m building now 😁
@justin_parks
@justin_parks 6 месяцев назад
5.0 coyote injectors work great decapped also. I've done 4 sets and they were all perfect with only 8. Eric tested 1 set of them I riggedly tested the others
@mxmang
@mxmang 4 месяца назад
We've got decaps in a 6l .620 lift cam ly6 heads pistons hx60 4psi to start 2 oem fuel pumps... Right around 80% duty cycle .. Around e10
@Levibetz
@Levibetz 6 месяцев назад
Funny that you mention Subarus because I'm doing a kinda sloppy Subaru thing but I jammed LS truck decaps into it. Just reamed the holes in the lower manifold until the 14mm o-ring fit nicely, topped it with an ebay fuel rail. Just on low boost so far, but it's running good. I flow tested them best I could on a basic autool tester machine, best of 8 is handy on a 4 cylinder. Should be around 830cc, should be able to make ~400hp on the ebay 20g for like 2k$ total into the engine and everything.
@TheBrokenLife
@TheBrokenLife 6 месяцев назад
Some lunatic needs to run an intake with 3 sets of decaps in it just for the lulz... How well does JB Weld tolerate boost? 🤔
@SloppyMechanics
@SloppyMechanics 6 месяцев назад
Use 3m panel bond it’s amazing for adding alum bungs to composite intake
@TheBrokenLife
@TheBrokenLife 6 месяцев назад
@@SloppyMechanics Aluminum bungs? Man... I was only thinly veiling my desire to see you just straight up JB Weld some injectors into a plastic intake and let it rip. 😂
@daltonrogers5483
@daltonrogers5483 4 месяца назад
KIA BOI
@Go4BrokeOffroad
@Go4BrokeOffroad 6 месяцев назад
5 years on a daily driver 6.0. zero issues for
@danduval9311
@danduval9311 6 месяцев назад
I used Eric for a set for the wagon build
@BlaserBuilds
@BlaserBuilds 3 месяца назад
Ayeeee...
@smiller225
@smiller225 6 месяцев назад
I'm thinking about sending him a set of 2015 through 2017 mustang gt injectors they are like 40lbs. LS presure
@scotthansen2240
@scotthansen2240 6 месяцев назад
Honestly kinda forgot about decaps. I'm gonna decap my LY6 and L94 injectors I got lying around and have him flow em now. Thatll be one less thing slowing me down.
@TokenTombstone
@TokenTombstone 6 месяцев назад
Cool.
@minitrucker04
@minitrucker04 6 месяцев назад
I use him to clean my injectors
@TF-zs4ff
@TF-zs4ff 5 месяцев назад
Off subject. But im building a ls harness for a term x. For the cam and crank sensors, do you run a two wire sheilde cable or just a one wire sheilded for the ipu ground? Where does the sheilded side of the cable ground to typically?
@kthschsslr
@kthschsslr 6 месяцев назад
This makes me wonder why 16 decaps have never become a thing.
@Shadow0fd3ath24
@Shadow0fd3ath24 5 месяцев назад
-903s are pretty common and amazing. 90lbs when decapped and thats enough for 800whp on gas easily
@danielg2741
@danielg2741 6 месяцев назад
👍🏻
@Kincentc
@Kincentc 6 месяцев назад
Idk if you meant to do it but you showed your addy homie
@MegamanEXEv2
@MegamanEXEv2 6 месяцев назад
If you google it, its the post office. Its probably a PO Box.
@Kincentc
@Kincentc 6 месяцев назад
@@MegamanEXEv2 word. I didn't check Just thought He might've slipped up on it
@thegalli
@thegalli 6 месяцев назад
so we know the modified flow rate from the test sheet, what do we do about the rest of the injector pulse width table data? does that change after decapping?
@trubio46
@trubio46 5 месяцев назад
How do you program these in the terminator x? Do you still just put in the pn off the side ?
@SloppyMechanics
@SloppyMechanics 5 месяцев назад
yeah you chose the stock injector and then just change the size, like these are roughly 75lb after decapping and there is a size amount in the holley you can easily adjust, so then after all that it has the stock data with the larger flow rate, works perfect
@trubio46
@trubio46 5 месяцев назад
@@SloppyMechanics ok thanks. I’m going to try it
@TheProchargedmopar
@TheProchargedmopar 6 месяцев назад
👍💪
@johnnymoran180
@johnnymoran180 5 месяцев назад
Hey brother, I'm doing a 4.8/ 88mm on e85, what injector would you recommend??
@MondayMotorvation
@MondayMotorvation 6 месяцев назад
People wear decapping subaru injectors?! I never heard that. 😮
@Levibetz
@Levibetz 6 месяцев назад
I think basically anything sidefeed is going to be a decapped, or otherwise modified stock injector. Even fancy Injector Dynamics injectors are basically an advanced decap.
@MegamanEXEv2
@MegamanEXEv2 6 месяцев назад
The first time I ever heard of decapping was in the late 2000's in the turbo Subaru scene.
@floridamanHooning
@floridamanHooning 6 месяцев назад
TFW literally no tuners around will tune decapped injectors..😢
@wobblysauce
@wobblysauce 6 месяцев назад
More info is better but saying no one will touch it isn't right.
@floridamanHooning
@floridamanHooning 6 месяцев назад
@@wobblysauce well all the tuners I called in my area said absolutely not lol
@StationroadRatrods
@StationroadRatrods 6 месяцев назад
@@floridamanHooningsounds like they like to be spoon fed
@floridamanHooning
@floridamanHooning 6 месяцев назад
@@StationroadRatrods entirely possible... Could be that they've done them in the past and got tired of guys coming in without getting them tested and we're bad then got complaints or whatever. I was gonna buy a bench flowed set and even let them know I've got papers for them and still got told no
@chipcurrey653
@chipcurrey653 6 месяцев назад
Use the stock injector data and up the flow rate to the worst flowing injector in a tested batch. That way every injector fuels at least as much as the worst one. Examples: Stock GM LS PCM, 29 LB truck injectors decapped, and the worst one flows 75 lb: In hptuners update the flow rate table from 29 to 75. Leave all other injector data the same. The electrical timing doesn't change with decapping. Holley EFI, 42 lb Bosch 5.0 Coyote injectors decapped, and the worst one flows 95 lb: Select the stock Ford injector part number, then change the flow rate to 95. "Tuners" don't want to use decaps because if they haven't been flowed, and one is way off, that's a big problem.
@Carpuride_USA
@Carpuride_USA 6 месяцев назад
hello friend , this is Jack from Carpuride , we sent you a sample device in Oct 2023 , when will you publish the video ?
@beecj0
@beecj0 6 месяцев назад
.
Далее
dont bs me: ep14 overview as is, slight rambletron
13:26
Here Are 6 (or 7?) Car Brands That Will Fail
21:07
Просмотров 419 тыс.
СЕРЕГА ПИРАТ - TEAM SPIRIT
02:37
Просмотров 227 тыс.
Коротко о моей жизни:
01:00
Просмотров 312 тыс.
What turbo LS stuff should I get 2017 edition
21:16
Просмотров 116 тыс.
Ford is Delusional
8:04
Просмотров 71 тыс.
Fairmont 7 ly6 6l80e torq storm blower update 2023 end
13:41
Rednecks Test the Tesla Cybertruck vs. Hummer EV
17:36
СЕРЕГА ПИРАТ - TEAM SPIRIT
02:37
Просмотров 227 тыс.