The Chinese ironer-ali.pub/3xas4s there are 2 different pieces in the set.
Yaponchik spatula ali.pub/3xau5b
Foam Gun lite.al/0_73e1
Battery bolkarka lite.al/zCiMVQ
I made a grotto out of ordinary plaster, Belarusian plaster lux modern, and putty snezka acryl putz. But it is not necessary to use the same one. Just such materials remained from the main repair. You can use any plaster and any putty. Painted with ordinary water-based facade paint, covered with acrylic transparent matte varnish VGT. I walked along the tops with mother-of-pearl.
It is here that the walls are sheathed with drywall and the seams are glued with mesh and plastered, and the walls are once plastered with finish. If your walls are plastered, and there is a chance of cracks, it is better, of course, to glue a grid on the walls. So: we prepare the walls as under wallpapering, that is, without fanaticism.
Then I applied the texture with a stroker and after 15 minutes you can smooth it out. But it all depends on the weather and temperature . See according to your circumstances, the main thing is that the solution no longer sticks to the trowel, but is pliable for formation.
There is no exact recipe for the solution. Once I did it only from plaster, and here I mixed gypsum plaster and finishing putty, it turns out about the same. Mix approximately 1:1. when the texture is formed, everything is smoothed out, we leave it to dry. My walls were drying for 3-4 days, it was cloudy and cold outside, it was drying in the corners for a long time.
Dried and painted with facade paint with the addition of black color. After the paint has dried, we apply a matte acrylic varnish. Then, with a parolon roller, we apply mother-of-pearl diluted with a primer on the tops.
It turned out super, I really liked it
#grotto #zakopeyki #svoimirukami
22 дек 2019
