Deflect that Mud! Deere 2032R/2038R Tractor Fender Extensions

Подписаться 236 тыс.

Просмотров 40 тыс.

50% 1

Installing Fender Extensions on the Deere 2038R Tractor with Kenton.
Rear Fender Kit available here:
www.greenpartstore.com/produc...
Tractor Time with Tim Information:
Website: TractorTimewithTim.com
Favorite Products: amazon.com/shop/TractorTimeWit...
TTWT Merchandise: TractorTimeWithTim.com/shop
Facebook: / tractortimewithtim
Sponsors:
Ken's Bolt on Hooks
www.boltonhooks.com/
Use Code TTWT for 5% Discount!
Heavy Hitch: heavyhitch.com/
Use code TTWT for 5% Discount
John Deere 2038R, 5075E, & 835M HVAC Gator
AHW LLC John Deere Dealership
www.ahwllc.com/
John Deere Parts
www.greenpartstore.com/ttwt
Use code TTWT for FREE Shipping
Baumalight 1P24 Stump Grinder
shopgreendealer.com/ttwt use code TTWT for 5% off!
Bluetooth Hearing Protection
ISOtunes link: bit.ly/2sCMOG4
$10 Discount with Coupon Code TTWT
Grapple: Artillian (Curtis Cabs)
www.artillian.com/
Precision Grapple
agfolks.com/
5% Discount Using Code TTWT
Lube Shuttle
lube-shuttle.us/store
Use Code TTWT for 5% Discount
The Original Tractor Cab
www.originalcab.com/
Use Code TTWT for 5% Discount
Bucketeer loader attachment
bucketeergear.com use code TTWT for 5% off
Hydraulic Supplies
discounthydraulichose.com/ttwt use code TTWT for 5% off
Hydraulic Valves
summit-hydraulics.com/ttwt use code TTWT for 5% off
Deck Dolly Mid mount mower storage solution
deckdolly.com use code TTWT for 5% off
Limbsaw
limbsaws.com use code TTWT for 10% off
Load N Go links:
1023E/1025R/1026R/2025R 60D Up to ~mid 2020
www.greenpartstore.com/produc...
2025R 60D must also order this:
www.greenpartstore.com/produc...
2025R 2017+ 54D
www.greenpartstore.com/produc...
2032R/2038R 2017+
3120,3320,3520,3720,3033R,3039R,3046R
www.greenpartstore.com/produc...

Хобби

Опубликовано:

25 мар 2021

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 210

@Kcolby47 3 года назад

Tim and Christy, who would think we could have that much fun doing this project? “Many hands lighten the load” and double the enjoyment of a project well done. Plus, figuring out a “better” way of doing something together is always rewarding. My sincere thanks for all the kind and complimentary comments! They are quite humbling. Blessings to Tim, Christy and the viewers!

@Zanderthelab 2 года назад

Ken, you are one of my new favorite cast members of the channel haha!

@Kcolby47 2 года назад

@@Zanderthelab Thank you, and I appreciate the kind words. It’s a lot of fun!

@Zanderthelab 2 года назад

@@Kcolby47 you’re welcome! I miss having projects like that to do with my dad. He and I have fixed everything and there is nothing left to fix. I miss having stuff to work on and fix.

@joeyshofner639 3 года назад

Ken sounds like one of those people who can walk into a local cafe/diner and everyone will yell at the same time “Hey Ken” at the same time. Need more like him in the world.

@Kcolby47 3 года назад

Thanks! Trouble is, I don’t know when to quit talking to them...(according to my family😉)

@chadcolby1320 3 года назад

You got it! Sometimes he carries on conversations with people. We go to leave an I say; "who was that dad?". Dad responds; "I'm not sure, seems I should know them from somewhere". Need to get him to give Tim his customary Back Slap. That's as important for dad as a handshake 😂

@TractorTimewithTim 3 года назад

Hey Chad! I’ve had the backslap! Love it! You have a wonderful father!!!

@mdh7812 3 года назад

First I would like to thank Ken for his service! Tim, I think you need to have Ken on more when doing these kind of videos. You two make a good team.

@Kcolby47 3 года назад

Thank you and I was honored to have served, and humbled by the support. It is a real pleasure working (if you can call it that) with Tim and Christy!

@oceans281 3 года назад

Having a guest on the show makes it so much fun!

@AdamMuhle 3 года назад

Kenton: First, we should show people how muddy the tractor gets without these. Tim: Or we could not

@brentbrown8393 3 года назад

Kent is a blessing, no need to make difficult situations worse by cursing and carrying on like a jackass the way I sometimes do when I become perplexed. Kent is my new hero. Thanks for your service Kent.

@Kcolby47 3 года назад

Thank you, and I appreciate you kind words. I’ve been very blessed, and it was an honor to.serve.

@robertmcdonnold3038 3 года назад

You can have Kent on any time. He is a pure pleasure.

@troyj1701 3 года назад

Ken cracks me up! You need to have him on more often. Lol He has such a great energy.

@Kcolby47 3 года назад

Thanks much, it is a blast!

@ronharrison1776 3 года назад

He looks like he would be alot of fun just watching paint dry . great sense of humor .

@Kcolby47 3 года назад

LOL! You could be right😉. Thanks

@timraber6575 3 года назад

You couldn’t find a better helped than Kenton. He is always a joy to see on your videos.

@Kcolby47 3 года назад

Thanks, very kind of you.

@wyattcolby4249 3 года назад

Very nice grandpa. 😊

@Kcolby47 3 года назад

Thank you Wyatt. ❤️

@adammiddleton4037 3 года назад

The world would be a better place if we had more Kentons

@TractorTimewithTim 3 года назад

Yep! We call Kenton when we need some encouragement!

@Kcolby47 3 года назад

Wow, that’s flattering, but I don’t think the world needs another me...I’m just blessed to be here!

@Mrbink01 3 года назад

I chuckle every time I hear Tim pronounce 2x6 as "tubasix".

@astralalienvideo 3 года назад

"I'll grunt and you just do it" is the perfect expression of masculine cooperation It specifies tasks, relives pressure, focuses action and delineates responsibility ity.

@thirdwatch9939 3 года назад

Wish 'I' could give this comment a heart. Lol

@paulmech5220 3 года назад

Thank you for your service Kenton

@Kcolby47 3 года назад

Thanks, it was a privilege to serve.

@Matthewzus 3 года назад

Hi Tim, I just put a piece of aluminum behind the fender while drilling so I didn't have to remove the tank. It worked great!!

@stevemueller3705 3 года назад

I enjoy the episodes with Kenton. He is such a positive person!

@Kcolby47 3 года назад

Thank you. I appreciate it.

@BradMyers 3 года назад

Great video of two guys enjoying life and getting work done.

@genemiller4148 2 года назад

Such a pleasure to watch and listen to the two of you. Good project.

@doogals 3 года назад

Kenton is a hoot! Just a happy-go-lucky guy!

@Kcolby47 3 года назад

Thanks!

@bigchew3149 3 года назад

Cool Video..& Tell Kenton Thanks For His Service From The Riddell Family !

@Kcolby47 3 года назад

My thanks to the Riddell family for the kind words. I’m glad I was able to serve, and for the support of many folks.

@Harry-zz2oh 3 года назад

I've found no matter what I "think" a project is always much more challenging than I first thought and it takes much, much longer.

@GriffithsFfestiniog 3 года назад

Great video just a couple of chaps making it as they go along, reminds me of every project. If all goes wrong read the instructions but we will never get to that point. Enjoyable time had by all!

@PurpleCollarLife 3 года назад

Fender flares for a tractor - what a genius idea!

@RockhillfarmYT 3 года назад

Nice video. Since adding the cab I’ve been thinking of doing this to help keep it cleaner as I also have the wheel spacers. Good demonstration and still lighthearted content

@howardrobertson355 3 года назад

You need Kenton more often. He’s a hoot

@waynejones1239 3 года назад

Thank you Ken for your service.

@Kcolby47 3 года назад

Thanks for your support of the troops.

@johanbos160 3 года назад

Nice video tim and kristie and looks really nice on the Johnny and that funny men is great to work with 👍👍😅

@kentuckycornbread8502 3 года назад

Was a fun episode watching you two Josh’n back n forth. Good job on the fender flares. 👍

@ronharrison1776 3 года назад

Thank you for your service , Kenton .

@Kcolby47 3 года назад

Thank you!

@AkDadStuff 3 года назад

Heyhey Tim I have to say Kenton is a joy to watch and listen to. I relly enjoyed seeing him on here with you . You are blessed to have a friend like him and he a friend like you. Take care

@philsmock4943 3 года назад

Kenton, what a great guy.

@Kcolby47 3 года назад

Thank you. I appreciate that.

@timziegler9358 3 года назад

The fender guards look great! Good job on the install. Best wishes

@jamesyates5191 3 года назад

I love your helper. I have the same 2038 tractor and didn’t know they made wheel spacers. Very handy on a slope.

@DragonflyAcres2022 3 года назад

Looks like you guys having lot fun.thank you for sharing and have wonderful weekend.

@photocontrol 3 года назад

Great work Tim & Kenton installing the extensions! A very good addition for the 2038R!

@PeterHonig. 3 года назад

My tractor wears its mud like a badge of courage!

@paulmorgan1897 3 года назад

You 2 guys are having far too much fun. Enjoyed watching a lot.

@johns17m 3 года назад

Another Kenton fan here!!!

@Kcolby47 3 года назад

How kind, of you. Thanks!

@CapeAnnImages 3 года назад

Nice fender flares! Years ago while towing my boat on the highway a Jeep passed me with too wide tires and he kicked up a rock which smashed my windshield, grazed my cheek and smashed out thru the back window! Luckily I kept control and another driver saw what happened and got the Reg # of the Jeep. The State pole tracked him down and was cited for improper equipment and leaving the scene. His insurance company paid all my costs. If he had fender flares it never would have happened. Best Regards, Jay

@savagep6997 3 года назад

Wow GREAT morning 🌄 with Tim & Ken ya'll had your hands full with the side with gas tank? boy it didn't take long ya'll got her done? GREAT Ken your funny man alot of fun you and Tim work together and fun watch SO nice see friends help each other? Stay Safe ❤🤟

@Kcolby47 3 года назад

Thanks for the kind comment. it really is a pleasure to work with Tim and Christy. They are great folks!

@multibikermike4681 3 года назад

Kenton had great idea with the soap stone. I use lipstick 💄 it works great but don't get caught with it.... 💋 It works great on door catches when installing and also marking upper and lower catch pins on double doors...

@TractorTimewithTim 3 года назад

I like the lipstick idea!

@multibikermike4681 3 года назад

Bright RED works best...lol...

@jeffherndon 3 года назад

I’m glad I had these installed at the initial purchase of my 2038.

@isaacjacobs39 3 года назад

Good Morning Tractor Time with Tim. Thank you Kenton for your service.

@Kcolby47 3 года назад

Thank you, my honor.

@royscarbrough3589 3 года назад

Grace and peace to all

@martineastburn3679 3 года назад

And then you can close pin on cards to extend the edge if needed ! Have a fun time guys - looks like it.

@irlfan4 3 года назад

That was a fun TTWT episode!

@tashonferguson5814 2 года назад

This appears to be the first episode of TRACTOR TIME WITH TRIM!

@TractorTimewithTim 2 года назад

Oh no. The first one is titled #1 … You can go to our channel, select videos, then sort by date to get them in order. There are a few older videos showing Katriel playing piano, etc before #1

@jeffreycurrie3410 Год назад

For as much fun as Kenton has, he should be paying you.

@rodneyscrivner2504 3 года назад

Great Job Tim & Christy & Kenton

@airnashville3883 3 года назад

Hey Tim, great video and I wanted to share an update: I’ve had a BX24 for 17 years and finally decided to upgrade/replace it. Your videos did so much to help me make that choice. My 2021 JD 2032 with FEL, mid mount mower and 270 backhoe will be delivered in a week. Thanks for your service to the community of tractor and implement users.

@bobcatsmith246 3 года назад

Love this episode. You need him on more episodes.

@-Dave-is-not-here 3 года назад

Fenders look good Tim, the trim piece is called windlace. Thank you Kenton for your service and thank you Tim and Christy for the videos.

@nealtubbs9608 3 года назад

Good video. You guys work great together.

@TractorTimewithTim 3 года назад

Pretty sure Kenton could get along with ANYONE!

@Kcolby47 3 года назад

Tim and Christy are great folks to work with!

@denisewildfortune4058 3 года назад

Never work with kids, animals, or Kenton, you'll always get upstaged! Today it was two, Martha and Kenton. LoL

@TractorTimewithTim 3 года назад

Yep! Oh well. I know my place :-)

@carlosg1165 3 года назад

Ken he is great super funny 👍👍👍👍👍👍👍👍👍👍👍👍👍😊😊😊😊😊

@Kcolby47 3 года назад

WOW! Thanks a bunch!!

@Harry-zz2oh 3 года назад

Many 4 wheelers add wider fenders since most larger tires require spacers when you lift the vehicle. I added 1" spacers to my Jeep when I lifted it 3" but the total increase in size due to the change in tires is about 5". Good way to keep the mud off your sleeves.

@texasproud3332 3 года назад

Good video y’all Tim has an assistant producer let get out and tear up the yard Lol

@tinachambers4887 3 года назад

Tim an Ken Tractor Time Repair Shoppe nice job guys Hi Christi have a day love from TEXAS

@bradperkins3337 3 года назад

Wonderful man! Thank you for your service

@Kcolby47 3 года назад

Thanks much. Honored to have served.

@DLTJR1959 3 года назад

Nice add on Tim. I always like that a lot of the European tractors have fenders over the front tires. Look great IMHO on FWA tractors. Don't see a lot of that in the USA.

@digglerminiddttthansen755 3 года назад

Great video you guys! I didn’t know that tractor was diesel!

@davidshipulski4532 3 года назад

Andrew Camarata would have helped you with his chainsaw, a skidsteer and self tapping screws! Good video Tim!

@yessir6523 3 года назад

These tractors are made so cheap, let Me reinforce it for You Tim, Some plastic welding should help, what the hells that smoke?

@HuserHelpers 3 года назад

Looks really nice. I think it is a functional modification. Take care and have a great weekend, Jason

@turtlehopper81 3 года назад

Kenton, Thank you so much for your service. Tim, please have Kenton on more often, he reminds me of my grandfather

@Kcolby47 3 года назад

Thank you, and it was my honor to do so.

@ericlaker1983 3 года назад

Liked the bloopers😂😂😂😂 great video and do like the fenders makes it look like a 8100 style fenders. Just need the turn signals lol..

@ralphjelomono9068 3 года назад

Nice drill bit conversion formula..Good touch to the 2038. Looks great

@bnewton5922 3 года назад

Kenton is perfect for tv. I didn’t know the tank was under the fender. Interesting location. Fender flares for a tractor go figure. Stay safe.

@Kcolby47 3 года назад

Thanks...it could be said “a face for radio” 😉

@Bob-vb8lc 3 года назад

I like those fender extensions. Kinda makes me wish I had a bigger tractor than my 1025R so I can add them lol. Good job Gents

@dngendron 3 года назад

Looks good I wouldn’t put those on a metal fender tractor because of potential rust issues at the fasteners but definitely a good idea for anything with plastic or rust proof fenders

@ritterjon 3 года назад

💥 Those look very nice. I can see how they could help prevent wet dew from flinging up for those who mow with their tractors. *Keep on tractoring!* 😁

@leokelly359 3 года назад

thats great Kenton served in Desert Storm ask him if he knows about the desert storm memorial being built in DC and the march we do memorial day in DC

@Kcolby47 3 года назад

Thank you. I know of the memorial, but was not aware of the march.

@truckerray7533 3 года назад

Good job. Im blown plumb outtuh the water by the price though!!! $295.90??? HOLY MOLY!!! Thanks for sharing. God bless!

@tractorcorleone 3 года назад

A very good idea 👍👍

@danne77sthlm 3 года назад

I was surprised, it looks from the sides that it doesnt cover the tires very well, but when you filmed it from the backside, it shows its as close as it might get, nice! Oh, one question, do you plan to try to put front fenders on as well to avoid slinging the mud around, maybe there arent any for these tractors and with the loader on it might not fit? And Ken has a very goodhearted laughter that I like and as positive spirit as you guys, its always nice to watch!

@Kcolby47 3 года назад

Thanks for the kind words!

@RCPSU4 3 года назад

I look at these and think of not getting dirty while doing certain jobs. Might be willing to say these are essential for anyone getting a 2032/2038 on up. Thank you to Kenton for his service.

@Kcolby47 3 года назад

Thanks, an honor to serve.

@jimhaugh6851 3 года назад

Great video thanks tim, I did front fenders a week ago on a 2025r came out really nice wish I could send you pictures I posted to 2025r group

@blyz_69 3 года назад

On my "Johnny 4" with cab, I was able to use a puddy knife and slid it in between the fuel tank and fender to keep the drill bit from contacting the tank. There was also room to get the bolt in with nut facing outboard but just barely. Improves the look especially with wheel spacers. I have a video posted on my channel if you're interested

@f.davidbush9093 3 года назад

Have them on mine. They work great.

@ohioplowboyhawk6738 3 года назад

I put a set on my 4720 way back in 2005 and they are holding up great

@dfestus 3 года назад

Thank for sharing this. I have a MY 2020. 2032R and the grab handle has loosen up at 100 hrs. You have to drop the tank to tighten the grab handle bolts. My dealer told me I have to diy or pay them. Said it was a big job. I'm going to pull this apart this weekend. Tnx.

@turdferguson5300 2 года назад

You'd better watch Kenton, he could have his own channel. You guys are great together. Could ya slide a piece of metal between the fender and the tank? Maybe with a sledgehammer if needed? lol

@TractorTimewithTim 2 года назад

He is funny! He is always upbeat and jovial. What a joy to be around!

@kingkong7617 3 года назад

That seems like a lot of work just to install some mud guards, but Ken makes it fun to do, so I guess it was work the effort.

@jjacres129 3 года назад

Haha you guys act like my partner and I at work nothing but laughing while we work

@digglerminiddttthansen755 3 года назад

HELLO from Utah!

@Zanderthelab 2 года назад

My cousin served in desert storm. He was an Army Ranger, I believe he might’ve been a Paratrooper as well. Don’t quote me on that though.

@jamesberg3106 3 года назад

Installed them on my 3 series

@rohde42 3 года назад

Love that guy

@Kcolby47 3 года назад

Thanks much. I appreciate your kind words.

@jdfleetguy28 3 года назад

Great video as always Tim. I had been wondering how that was going to work with that fuel tank there inside the fender. Getting ready to put spacers on my 2025R. Good know there is a way to add extensions should I need them.

@hunny.bfarms9284 3 года назад

9mm is closer to an 11/32. 7mm is closer to 1/4. We need to do these conversions more than I like to admit here in Canada

@darrickhamerlinck5472 3 года назад

We have the front turntable fenders on our 2038 might just add the rear extension.

@tomcarter9816 3 года назад

I think there are also front tire mud guards you may want to look into Tim

@David-lh1vp 3 года назад

There probably is a removal tool for those stud bolt things so they won't break and you might even be able to reuse them.

@jimmyhorton1504 3 года назад

Very informative video. I think front fender options would be neat for sub and compact tractors. I haven't seen any. I wonder what the pros and cons would be?

@earlyriser8998 3 года назад

A simple 20 minute job on one side and hours on the other lowering the tank ...that is my experience too...we joke that this is a '5 minute job' not expecting it will take 3 hours once we start with a wrench

@GreyMassey 3 года назад

6mm in fraction is 15/64

@NHHalKnowsHow 3 года назад

Kenton needs his own channel or maybe "Tractor Time with Tim and Ken"!

@Kcolby47 3 года назад

LOL!

@chadorf7874 3 года назад

Hi tim

@GrampysTractor 3 года назад

Thee Door Edge Guard, that you added at the end, was it included or did you add it to cover a thin edge? This was a great project to add the fender flares to the 2038. It really looks great. Kenton working on the fender flares seams a little out of his league after reconstructing tanks.

@TractorTimewithTim 3 года назад

edge guard included. I think it will come off soon. ...in fact first project part of it came loose. I had to stick it back up there.