No video :(

DELETE the EGR valves on a Land Rover Discovery 3 V6 TDI... More Power!!?

Подписаться 12 тыс.

Просмотров 105 тыс.

50% 1

WANT THE SAME X8R KIT?? Fast Delivery and 20%OFF (with discount code WIMPY20)
Follow the the link below:
x8r.co.uk/egr-...
For 20% Discount on the X8R site use Promo code : WIMPY20
Stop your Land Rover Discovery from breathing in its own Diesel Farts!! aka Exhaust gases!! By removing / bypass the EXHAUST GAS RECIRCULATION valves. Faulty EGR valves?? don't bother with EGR cleaning etc just cut them out!! Cheap and Easy!! AND on the LR3 no reprogramming needed.
Some say this is an MOT fail? After I did mine it passed the emissions test.. Just! But I live in France so I can't say for other countries etc.
This is an easy modification with many benefits... Apparently?? so I thought I'd give it a try and share the process and results with you guys.
This kit is compatible with TDV6 2.7 models with the 10th digit of the Vin number 6 or 5. If the Vin number is 7 or higher the kit will likely fit but the MIL will remain lit to indicate an EGR fault.
For other Land Rover discovery repairs see the playlists.
OH and for the record I didn't really stick the pipe up my ass... Yep
Music by LIQWYD - Diamonds + Do it
Support LIQWYD Stream/buy his music:
- Spotify: spoti.fi/2RPd66h
- Apple Music: apple.co/2TZtpeG
- Soundcloud: / liqwyd
- Bandcamp: liqwyd.bandcam...
- / liqwyd
Free download: bit.ly/diamond...

Опубликовано:

27 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 187

@WIMPYbrothers 3 года назад

Last Video from my old stock!! So back next working on the Mk 2 GTI build with New material... glad I put out my Land Rover videos tho as welcomed new subscribers so thanks for joining the brotherhood and supporting the channel... 🙏🏻🙏🏻 Laterz!! 😉

@TammyDenseDdank5658 2 года назад

Just did this on a VW TdI. These engines suffocate themselves and in the long run, they than pollute and consume more fuel than necessary because of the wear. Ingenuity and complexity at its finest. Thx politicians and environmentalists! May you inhale your own farts, indeed!

@HSVWPN225 Год назад

Just finished doing this on a Ford Territory, works so well

@georgejameson8610 3 месяца назад

Did any fault codes come up while doing it?,thinking to do same on my territory.

@petestevens1223 Месяц назад

@HSVWPN225 did you have to remap on the Territory ? Did you get any codes come up?

@iandwyer-ty3zq Месяц назад

Did you get any codes come up and you able deletes the code easy ?AS i was told that cant remapping on early 2011 mod del but can remapping on later model like 2015 up

@csabycanam6589 4 месяца назад

best EGR explanation ever 🥰

@WIMPYbrothers 4 месяца назад

Glad you think so!

@TheRobCave 11 месяцев назад

Thank you for the video... Helped me out ... I just can't clear the engine fault, when i do, it just comes back

@powervolt748 3 года назад

Excellent video! Doing mine tomorrow on a 2007 Discovery 3 and this will need a software patch. Pre 2007 didn't need the software patch. Cheers 😊

@WIMPYbrothers 3 года назад

Awesome!! Glad it helped... Just be carful of the little gaskets when you remove the EGR pipes as I dropped one of mine. It's a bit tight down there so It's not easy. Just a heads up and good luck

@matthewjbellamy1 2 года назад

I decided to delete the egr valve in my d3 . I bought the kit and opened the bonnet ......it had already been done ha ha . Btw I really like your style......do it 👍 edit.....this video is a year old and still not at 1k subs ....cmon people are you not entertained?

@Gumbalkan 2 года назад

First video of yous I watched and its freaking amazing. Good job mate!

@stobsie 3 года назад

Great explanation with the use of props. 😂

@WIMPYbrothers 3 года назад

😂😂😂 the idiots guide to EGR valves!!

@wanabesailer9599 3 года назад

What we do here in South Africa is do the EGR delete, remove the CATS from the exhaust and a ECU remap. On my D3 I got 6.9lt/100km consumption after doing all those mods plus it pulled like a train ;)

@wesleysmal9 3 года назад

Rupert..gee hy nie baie error codes dan?

@wanabesailer9599 3 года назад

Wesley, die D3 het absoluut geen error codes gegee nie en ek het omtrent 80k km opgesit met dit gedoen. TorqueTune in Joburg het hom ge-remap en hulle is die beste. Gaan na Landyworx toe in Randburg ;)

@TheGeno1971 3 года назад

Hi Rupert, where can I get your remap for a nanocom. Cheers Gene

@wanabesailer9599 3 года назад

Total Driver, I used a company called TorqTune here in South Africe. Just google them.

@greymilne1016 2 года назад

Hi Rupert , just saw the vid and you comment, how is the car doing sofar if you still have it please, I am thinking of doing the exact same thing to mine but not sure if I should EGR ,DE-CATS and Re mapping ? Any inputs please 💪

@atp1579 3 года назад

Sick vid music on point, informative. Hoping to get a LR4 this year

@sydneywicks3747 3 года назад

Just a tip you can do the same thing but for 2p instead of buying a kit which if seen in an mot test it will fail

@D3LAL89 4 месяца назад

Thankyou so much for your video ! Massive help and hilarious ! Just subscribed

@mathieuraedemaeker2201 3 года назад

Hello from Tahiti. Nice Job.

@greyskys2179 3 года назад

I did mine, it’s ready worth doing for all the reasons you said!! I’m getting 32 to the gallon . Thinking of a little remap 😬

@devian2364 Год назад

You have a nice selection of cars mate!

@Joe_D1905 3 года назад

Yeeees, brand new episode🥳 be careful mate, I’m getting used to daily content😁 very cool video again. Really looking forward on the future builds of the MK 2 GT‘aiiii and the Porsche beast. By the way, I had to download all the songs which you’re using in your vids😅 hope Ikson, Ehrling and the others are happy. Please be safe and healthy. Greetings to you and your family from Germany

@WIMPYbrothers 3 года назад

Thanks mate!!! That’s all my old stock videos uploaded now so I’m good to go on the GTI!!! Happy days 👍 I’m excited!! Really hope I can get more regular on the videos too... Thanks for watching the Old vids mate and for your support as always 🙏🏻🙏🏻

@thehiddenreality2314 2 года назад

Good job salut from Sweden,,,👌

@stevebarker669 3 года назад

I think we all appreciate a bit of humour when explaining these things, always goes down well. One question, anyone got any idea why the butterfly valve flap was removed? or more-so, what did it do in the first place? Cheers all.

@WIMPYbrothers 3 года назад

Thanks mate... I believe the butterfly valve is a cut off for the air intake when the EGR opens. In keeping with my intro explanation its a bit like pinching your nose so you get 100% fart gas! Yummy!! NO EGR means no Butterfly as it will cut off the air

@peterandrews7756 3 года назад

@@WIMPYbrothers so how do you control how much air with the throttle pedal is there another one some where.

@ssmaria 2 года назад

@@peterandrews7756 Diesel engines don’t use means of controlling air intake, they regulate speed by injecting more or less fuel, air intake is always fully open

@davidodriscoll7540 3 года назад

Love the LR3 vids, just wish mine wasn’t as rusty as yours! Subscribed by the way!

@WIMPYbrothers 3 года назад

Thanks mate!! It’s a shame on all the Discos as it makes them so hard to work on. Especially with the UK climate it’s not a good mix for rust prevention! Appreciate your support and welcome to the channel 👍

@davidodriscoll7540 3 года назад

@@WIMPYbrothersor here in Ireland! I’m not looking forward to tackling much on the car but the way things are, I’ll be following all your LR3 videos!

@desmarizal 3 года назад

mercy. great solution bro. great share from u. thx again

@WIMPYbrothers 3 года назад

Thank you too bro!! appreciate your support...

@rahimmadjitov1653 4 месяца назад

Hi, I'd like to do the same process on my Jaguar 2010 model v6 3l desel engine on coming Monday

@rahimmadjitov1653 4 месяца назад

SAJAC0540BNR84507 THIS IS MY VIN NUMBER DO I NEED TO Do anything consider programming

@marekmalinowski7119 3 года назад

Super filmik,pozdro.

@Knorsky 3 года назад

How this guy dosent have 100ksubs minimal

@WIMPYbrothers 3 года назад

I’m working on it mate!! One sub at a time 😉 fingers crossed once I get past the 1000 benchmark RU-vid will give me a boost in the right direction?? Thanks for watching mate!! And your kind words 👍

@rolandvanduppen2973 3 года назад

Hi, Cool video! Question about fuel consumption: You say the car went from 8.8 to 10 liters for 100km, which is actually worse than before the operation... Your dashboard shows 10 km on 1 liter so I guess you mean it went from 8.8 to 10 km on 1 liter. That would be an incredible gain of almost 14 percent... I find that hard to believe. Going to do the operation anyways to stop fauling up the engine.

@WIMPYbrothers 3 года назад

Yes you are correct... I get confused as each of my cars records consumption differently. I had been on some longer drives which would help the stats for sure but no matter what I tried before I could never get near those results. I also gave the car a full service and replaced all the brake components which were in really bad shape and causing resistance. The dirt it caused in the engine!! Defo worth getting it done and good luck

@davidhuett3579 3 года назад

@@WIMPYbrothers I'm still a little confused here with your explanation. Are you saying that you are in fact getting 'worse' mileage now than you did with the EGR's fitted. That is .. you used to consume 8.8Lt/100km now it's around 10? So the outcome is 'worse' for fuel consumption but 'better' with regards to the exhaust gasses re-entering the engine and clogging it up.

@mihhneea 2 года назад

@Feature Squad ?

@stephencrowther524 6 месяцев назад

Well,in theory,in the U.K.,this means that you have invalidated your MOT. Without a valid MOT,your insurance is no longer valid either.

@WIMPYbrothers 6 месяцев назад

Good job I live in France then… 🤔

@davelock3166 2 года назад

Great video. I didn't know you could get blanking kits for Disco's of this type. Why replace the valves every few years when you can do this. It is a no-brainer.

@phunong2757 Год назад

Very good idea and look easy to modify this to make better performance and less black smoke. I love this WIMPY! Can I do this on my Discovery IV SDV6? There are no difference design on air intake and butterfly parts, so any error message pop up on screen? In this case when finishing, EGR parts are no longer required or need to be replaced? Do we need DPF oil or just ignore this? Link to buy this part please?

@Djr67 2 года назад

I have a 2013 Diesel Ford Territory (Australia), it has the same motor as the Land Rover Discovery 2.7TD, I'm thinking about doing this to mine, does the ECU need any modifications?

@Krugoose 3 года назад

Hi just done this with the same kit have you noticed the turbo being louder? Thanks for the video you inspired me to do it at 1am 😂👌🏻

@WIMPYbrothers 3 года назад

Thanks mate 👍

@benwildgoose5057 3 года назад

Just got yourself another subscriber

@WIMPYbrothers 3 года назад

Awesome! Thanks for your support

@paulnguyen3069 3 года назад

Great content had to subscribe and like. Keep up the great work

@WIMPYbrothers 3 года назад

Thanks for the sub! Appreciate your support

@khalilrazak6486 10 месяцев назад

I'm thinking about doing this on my landrover discovery 4 BUT will it fail the dreaded MOT especially for the emissions test and can an MOT inspector tell if the egr has been blanked or not. Also is it definitely better for the engine?

@warriorbrawl 3 года назад

Be careful putting metal tools down on your battery.😁😉💥

@WIMPYbrothers 3 года назад

Good call!! My bad 👍 thanks for the tip

@tomthompson7400 6 месяцев назад

Did yoy have the ecu programmed to remove the dash lights and let the sensors know not to look for egr response

@WIMPYbrothers 6 месяцев назад

No mine didn’t need it as it was 2008

@BlueJayKRO 2 года назад

I blanked mine off age’s ago but never removed the butterfly. Guess I need to get the bonnet back up. Wonder if that’s why the engine management light is on.

@tas717 3 года назад

Great video I’ve been catching up, Oh where has the gti gone? You’re getting closer to the 1000 subs

@WIMPYbrothers 3 года назад

F foundation yeah mate!! 1000 is in sight ish!! The 7.5 GTI is outside mate.. it’s my daily 👍 it that last video it was in bits under a cover. That last upload was from 6 months ago? I just wanted to clear my hard drives and start a fresh with the Mk 2 GTI project... starting tomorrow mate 👍

@WIMPYbrothers 3 года назад

The repairing part was 6 months ago... I just filmed the intro bit recently🤔

@rostahang1341 3 года назад

engine check sign ?? or sth else ?? im about to do with my l405 2013 3.0sdv6 thz for the video sir!!

@WIMPYbrothers 3 года назад

Good luck mate!

@falseneutral7890 2 года назад

EGR is such pain. Mine is living it’s own life, it’s throwing the code at me lighting the MIL on and off. Doing that even after installing a new one. So the problem is probably elsewhere in the system. Can’t be bothered to keeping throwing money at it. Need to do an software delete and be don with it. Only it’s highly illegal 🙈

@singingjazzdancer 7 месяцев назад

Hi! Norway calling! (Had to say that on account that I saw your cool jacket.) So, I have (on my Jaguar XF with the same engine) considered blanking off the EGR but won't it screw with the messages in the display? AND trigger the dreaded 'limp home - restricted performance' state? I get a 'DSC not available' message along with restricted performance. My question is: Do I have to do program the ECU along with the EGR blanking?

@boaz63 5 месяцев назад

Great job! Would this work on a Disco 5?

@WIMPYbrothers 5 месяцев назад

Not without reprogramming the ECU, the new models will detect the change and go in limp mode… thanks for watching 👍

@lonnau 7 месяцев назад

Good morning, is it unpredictable to reprogram the control unit to avoid turning on the MIL? thank you!!!

@garwood38 3 года назад

Late to the table on this one. Love the vid and channel, now fully subscribed. I have just bought an old 05 Discovery 3 and can you tell me where you got the EGR blanking kit from as love the visual instructions. Cheers.

@WIMPYbrothers 3 года назад

I got mine from X8R.co.uk, It should be £20 ish but otherwise they’re all very similar. Search google or eBay 👍

@garwood38 3 года назад

@@WIMPYbrothers cheers. Got my kit, just out of interest how did it go after a couple of weeks, mpg, smoother etc ??

@davidjohnson825 3 года назад

Great video thank you, just bought an LR3 on an 07 plate, is there a way to check to see if this mod will work without needing the software patch? I do not want to do all the work and then find out it needs software changes

@WIMPYbrothers 3 года назад

Thanks mate!! I’ll read up on it again but... The vin/chassis number will tell you if it’s ok or not. It’s the 8th?? Digit!!?? If it’s a 6 or 7 it’s ok... but let me get back to you on that one after checking with X8R

@mat1turner 3 года назад

I have a 07 disco 3 hse 2.7 vin number SALLAAA137A428896 would this need software?

@oakleysimon3739 3 года назад

@@mat1turner Looks like your’s a MY04; a pre MY07 doesn’t need a sw update as I recall.

@mkham74 2 года назад

Hey bro, i’ve meaning to ask, did you have to do an ECU tune with the kit?

@viflag Год назад

Hello. Super vidéo Have you a link or the exact name of the item for buy it please ? After the modification, how to remove fault codes? they don't come back afterwards?

@Armandinho8 3 года назад

Liked... subscribed!

@WIMPYbrothers 3 года назад

Thanks mate, Welcome aboard!

@williamlelong2195 Год назад

Hello, can you explain me why did you remove the butterfly motor of the admission to re put it back... 🤔

@StuartGould-dx8mc 7 месяцев назад

Someone mentioned a software patch, I have a 2007 tdi that I am going to do, Where and how do I do a software patch? TIA

@vladmateescu6208 2 года назад

Why do you need to remove the butterfly from the actuator shaft ?

@RangieNZ Год назад

It's not a 'throttle' butterfly, it's a 'restrictor' butterfly. It is normally fully open, unless EGR is happening, then it partially closes in order to create the pressure drop needed to drag exhaust back into the intake.

@Eireann. 29 дней назад

But what about the engine light

@donnacox2385 2 года назад

Brilliant

@jjdetailing112 3 года назад

Great job. Can I ask is this the same on a Range Rover sport 2007 I’m looking to do the same. Would it be the same process with the butterly valve ect?

@sandunegruseri8023 3 года назад

your engine is an euro 3 or euro 4? i Don-t know if i CAN Do this job on my lr3 from 2008 euro 4.geat job.thank you

@WIMPYbrothers 3 года назад

I think you can do the delete but on top of the blanking kit you will need to have the ECU programmed to not trigger a fault light etc. The newer models were a bit smarter and not easily tricked

@callummcalpine1361 3 года назад

What year is your D3? I’ve a late D3 wondering if it’s going to throw any faults up! How long did it take you roughly?

@WIMPYbrothers 3 года назад

This kit is compatible with TDV6 2.7 models with the 10th digit of the Vin number 6 or 5. If the Vin number is 7 or higher the kit will likely fit but the MIL will remain lit to indicate an EGR fault. Copied info from the X8R site.. Mine was a 2006 and it took a 4 hours ish but thats with filming etc... Without it would take 2 hours if you give it all a good clean etc.

@callummcalpine1361 3 года назад

@@WIMPYbrothers cheers man, I’m gonna get my kit ordered and then I’ll probably get it in for a remap after to clear the egr and a little more performance too! I’ll let you know how it goes!

@alibarber57 3 года назад

@@WIMPYbrothers hi guys Having trouble with a 2012 ford territory which has the same v6 tdci diesel engine If I blank off the egr valves wont it keep coming up with a egr fault and put the car into limp mode ...already having trouble with it doing so now.. I see blanking them off is a better option just need to know how to overcome engine fault light if it throws it up

@owlLewis 2 года назад

Bought mine little did I know it had EGR delete, shits out black smoke... anyway to stop this?!

@garybates2121 2 года назад

Hi just a quick question I have blanket my egrs off but I haven't tuck the needle out of the middle is that a must on my range rover sport hse please

@liamsawyer586 3 года назад

Mines a 2008 range rover sport just having the EGR blank off as I write thing will the engine management light stick on and if so do I have to get an eye delete

@junak0210 6 месяцев назад

What year is the car? I have a 2006. Do I need to turn the computer off?

@WIMPYbrothers 6 месяцев назад

No don’t think so… only 2009 onwards I think 🤔

@andrewmurray4113 Год назад

Is it just the butterfly valve you remove from in the housing then

@michatrejgis2188 2 года назад

Can EGR be stuck, and blanked, or should it be working and then blanked? One of mine is stuck for good.

@NathanNostaw 3 года назад

Did I just miss it or did you not do the ECU remap to stop the EGR valves cycling? If the valves still operate they will still fail even if they are blanked off.

@WIMPYbrothers 3 года назад

@martihunter3022 Год назад

Hello, where do I buy this beautiful kit?....PD. great video!!!

@melwakes693 3 года назад

Can i ask What year is the car please And is there no computer delete needed

@WIMPYbrothers 3 года назад

Read video description for details on the Cars which don’t need computer delete. Mine was a 2008

@melwakes693 3 года назад

@@WIMPYbrothers thanks for the reply Mine is 2008 as well

@WIMPYbrothers 3 года назад

Just check the chassis number, I think it’s the 10th digit must be a 6 or 7?? 👍

@theprojectproject22 6 месяцев назад

Did the egrs need mapped out once the blanks are on

@WIMPYbrothers 6 месяцев назад

No, mines a 2008 so not needed

@WIMPYbrothers 5 месяцев назад

Not on mine as 2008

@joshjelfs6910 8 месяцев назад

Can I do this on the D4 sdv6? I've had an egr deleat and mapp but would it be better to blank it all off? Cheers

@mrfairycake4333 3 года назад

Nice Cup :)

@martinainguis1 3 года назад

Once this is done do you need to let it warm up on cold start bet setting off or no need for it

@WIMPYbrothers 3 года назад

No mate, just as normal... I always just give the glow plugs a chance to heat up on a cold day as you would normally and hit Start!! Broom off you go 👍

@steveruda966 3 года назад

Ive got a 2008 rrs ..thinking of doing the same ..did you have an issue with the egr error codes or did you have to doia digital delete on the ecu ? tks

@rolandvanduppen2973 3 года назад

Mine i s 2007 so I will probably get a fault code... Do I have to take it to the dealer or can I reset with the GAP IID tool?

@WIMPYbrothers 3 года назад

The kit is compatible with TDV6 2.7 models with the 10th digit of the Vin number 6 or 5. If the Vin number is 7 or higher the kit will likely fit but the MIL will remain lit to indicate an EGR fault. Hope this helps

@jameslindley924 Год назад

😆😆😆 Subscribed Buddy !!

@Caleb-lbj 9 месяцев назад

Can't do that with the Land Rover evoque

@shirra86 Год назад

Did all of these stuff on disco 4 and now it äs warning for restricted performance

@josol7922 3 года назад

Je suis mort de rire 😂 DO IT thank you bro 😂😂🇵🇫

@ThePipelineman 2 года назад

Like it.

@LiviuiosifBicfolvi-gc2hs Год назад

do the old gaskets fit with the egr wiper plugs?

@iglesiacasadejose6137 3 года назад

Que haces con los concctores de la egr ?están desconectados? Nada error?

@mariandrade3 3 года назад

hi. I have I land rover lr4 tdv6 2.7 2010 can a do this in my LR?

@WIMPYbrothers 3 года назад

Read the description on the video for more details but I believe you’ll have to reprogram to not have a fault come up 🤔 as it’s 2010

@cocalarusnk 2 года назад

Have you done it?

@ArkadiuszKubiak 3 года назад

Do you need to do the reemap after this procedure ?

@nikhilkowmudi7479 Год назад

Any engine heating issues after EGR delete

@paulpalmer3858 3 года назад

my disco has already had this mod but the alarm has just came back on the dash any ideas

@jameslindley924 Год назад

Will it Pass the MOT Emmissions Test Exhaust Gas

@matthewenglish8545 9 месяцев назад

Did it not throw any codes?

@marianbigu9442 2 года назад

you can give me the list of steps I need to take

@viflag Год назад

No défaut code after the modification ?

@aliozanerbektas 2 года назад

Did you get a check engine light?

@WIMPYbrothers 2 года назад

No, just need to check your vin number to see if you’ll get a check engine light. Details in the description 👍

@aliozanerbektas 2 года назад

@@WIMPYbrothers shit! I just checked, mine is 9... 🤦‍♀️

@modellbobby Год назад

Discovery 4 same thing ?

@GeGe8ha 11 месяцев назад

hello sir... were can i bye this part?

@GeGe8ha 10 месяцев назад

were can i bye this part?

@eddyp8614 2 года назад

Will this clear P045C? Got low voltage on egr actuator B TIA

@aswegrowaswegrow Год назад

Hi there what did you do to sort that code? Mine just started throwing the same code

@seaklinhor2764 3 года назад

Why remove butterfly valve quite surprise

@scottwilo7426 3 года назад

Did you need a remap or any software

@WIMPYbrothers 3 года назад

No as mine was a 2007

@scottwilo7426 3 года назад

@@WIMPYbrothers what years don't require I have a 2008

@taxtalk5864 2 года назад

will it not fail an mot now though?

@blenchy1 2 года назад

Do u not need to map the egr out ??

@nsm_fpv9901 2 года назад

Do you have the link for the kit ? Thanks

@andrewbritton4106 3 года назад

And no warning lights!

@WIMPYbrothers 3 года назад

No mate, on the 06/07 models you can get away with no reprogramming. Hence no lights 👍

@arbr1697 3 года назад

why don't you just block off one end of the hose?

@ericktorres6542 3 года назад

Can I ask what year is the D3? Any warning ⚠ lights on?

@WIMPYbrothers 3 года назад

No warning lights... mine was a 07 but check the 10th digit of your Vin number. If it’s a 6 or a 7 your ok for warning lights

@bautiramada Год назад

Is ECU remap needed after EGR delete?

@dherdy9205 Год назад

Remove the butterfly flap enables straight air which does not trigger EGR response because you are replacing the dirty air caused by the butterfly flap , If not you have to delete the EGR in the ECU, The theory is diesel burns different

@gel210 3 года назад

You did not say that EGR valve delete only works on models before 2008 ,I bought the kit you recommended for my 2009 disco 3 and found out the soft wear on newer models can not be over ridden with this kit , cost me a lot of grief .

@andy_holbrook 3 года назад

If you have the GAP IID tool I believe you can patch the software yourself, pretty easy to do. They cost around £400 but can do a lot of fault finding and software fixes yourself.

@Dr-stonk 2 года назад

Do your own research, it’s not his responsibility. He even said that this isn’t a “How to video”

@umyeahnahbro 2 года назад

you can sort this by drilling a 7mm hole into the blanking plate that goes on the egr side of the hose. that way the engine is fed a very small ammount to trick the computer into thinking it is working as normal.