Denali DialDim™ Lighting Controller - Universal Fit 

Hope you can install one for your viewers to see how easy/hard it can be. I think this unit is a home run, my bike is not a cam bust system. Thanks for sharing 👍🏽

I bought one for my Honda Rebel 1100 from Denali. I hope i get it all connected correctly. I hope your video will help. Great hat, BTW.

Is the Denali Dialdim a good alternative for 2 seperate dual intensity switches with 2 seperate Denali Dual intensity controllers? At the moment i have Denali DM's installed on my bike with the standard switch. I plan on making those dimmable. Then i also want to add a set of DR1's and make those dimmable aswell. My bike does not support a cansmart (R nine T '18). Is the Denali Dialdim my perfect solution? Seems like a way neater way to do it!

How much are you dealing them for as I have second generation DR1 and DM lights on my Honda xl Varadero 125 2008 one switch would be better then two

Would it be possible to use T3s with this? Either on the main or secondary circuit, or both circuits to support the T3's dual purpose (drl + turn signal)

Where do I find your price list for DialDim kit

Nice segway into CANbus controllers. For most new KTMs the HEX/Cansmart can't even use the new Canbus so its pointless to buy these. Not even sure why they are still offered.

I really want the new D3 lights for my 2020 V-Strom 1050XT. I am mechanical but am very limited in the electrical part so I would like as much of a "Plug and Play" setup as possible. What do you recommend for my bike?

This is exciting! As someone with a bike without a CANbus, this looks like it will make your awesome setups possible on just about any bike.

I hear that the unit is vehicle universal but will it work with other lighting brands other than Denali?

Can this be used with Baja Squardon lights?

So on the new ezcan you can’t use the y cable on 1 cirquit ?

18:58 and no sign of a dial rim actually on a bike

I wish I would it known about the Ez can before or if they make it for 2021 Ducati multistrada v4s, I got the Denali D3 with the Dialdim and I just finally finished installing it, the way how you can Dim the lights is just so cool, and they only have the plug in harness for BMW and Honda Africa twin, in my case I have to try to find the other wires in my bike to connect them with this universal harness, unfortunately this product is too new and there isn't a RU-vid video to learn. Thanks for the info

I installed my dialdim but the strobe function with the horn isn't working. Does it have to be programmed to do that? If so, how is that done? Thanks for your time.

Great video, I was hoping this would be on your channel. Switched bikes and with this missing piece Denali offer a viable alternative to my previous Clearwater set up.

Do you still need a CANsmart Controller Gen II if you get this?

have a 23 plate cb1000r, looking at the d3 driving to mount on my just ordered sw motech crash bars along with the dialdim, reading some of the comments here makes me wonder if it will work 100 percent on my bike?

I'm thinking of. Dial dim for my Honda Goldwing... When I tie the trigger for the D3 to the right and left signal trigger wires, will the D3 spots flash and alternate with the 4 way flashers? Great videos... I'm likely too far away (near Toronto Canada) to be a customer. But you get.my thumbs up. If ever I make it back to the UK... I'll come.for a visit.

Hello warden, I am a new inmate (subscriber) sending salutations from Los Angeles California. Great channel and superior content. I have a 2020 Kawasaki Ninja 650, is the Denali DialDim Lighting Controller - Universal Fit as simple as plug in play? Meaning if I connect each colored wire to its corresponding wire (green - horn, blue - high beam etc) it will work as such? No type of programming required is my main question for the Denali DialDim Lighting Controller - Universal Fit. I truly truly appreciate any type of feedback. I value your time and efforts, especially on the full line field comparison on a separate video. #LongLiveABikeThing

I've bought this and the D3 pods. Great bit of kit in theory for my ducati multistrada 950s 2020 which doesn't have a hexcan unit available. however as the bike has a canbus controlled high beam there is no way to get the blue trigger wire connected to the bike. this in effect means that you can't use the dial dim's main functions. the percentage output remains set and doesn't go to 100% when I put my main beams on. it's just a word of warning if you were buy these as the universal fit!! it will not work 100%

Love your vids! Any estimate of when Hex is going to release the ezcan for the Tenere 700?

for harley?

thanks for the video, do you recommend buying the DialDim if I already have CanSmart installed with a Denali D4 on a BMW GSA 1250?

Can it modulate the brake lights or lets say B6's

can u offer complete kits of lights and all I need for honda africa twin 1100 plug and play, shipping to germany?

thanks for the video, do you recommend buying the DialDim if I already have CanSmart installed with a Denali D4 on a BMW GSA 1250? Thanks!

I’m curious how bright the LED brightness indication is at night Is it distracting?

Looks interesting, waiting to see builds on your SAS too