Desert Eagle FULL Reassembly 

Again, thank you very much. Very generous of you to make these videos to help others. Cheers!

Thank You

By far the most well filmed assembly on the DE. I had a curveball taking mine apart. It was a California version so there are two pins on the firing pin stop plate. You need to depress the lower pin which will allow the firing pin to depress.

You are a great teacher! 👌👌👌

Thanks much.

0:00 Recoil spring assembly 5:00 Hammer mechanism housing 19:18 Frame population 38:43 Bolt population 44:28 Slide population 54:27 Basic reassembly

Fantastic Video helped a loong way

perfetly informat8ve and descriptive (little paiful slow for me) thanks for detailed view into deagle...

Had an issue after reassembly where pulling my slide to the rear doesn't cause the slide catch to drop and the slide to be released, i have to manually push down/disengage the slide catch to release the slide. Bent slide catch spring?

Ótimo vídeo! Pena que o vídeo está sem legenda em português, mas mesmo assim deu pra aprender a montagem. 😀😉👍

Great video! Thank you for this. I have a .50 and just bought a brand new .44. The new .44 will eject the spent casing but not grab the next round. The slide is closed after firing a round however so it leads me to believe the slide isn’t being pushed back far enough from the recoil. Another tidbit is that .44 is harder to pull the slide back on then the .50 which I would assume should be opposite if any difference at all. I just swapped the springs on them and hope to test soon. Have you seen this? I only use factory mags btw. Thanks in advance!

What have you found to be the parts that need to be replace? I was thinking of getting parts....

The color on the frame is very nice what is that color

First.

His complex mechanism could have been made much simpler.

I can do this in 5min lmao.