It's time to start thinking about the panel in my Super Duty. Designing the layout of the panel had always been one of my favorite parts of building my own airplane. Let me show you how I do it...
Oh, and a little more about my panel. Although the layout design will most likely change slightly, the equipment won't. Since this is an IFR panel, both EFIS screens have their own ADAHRS. Additionally, each screen has it's own back up battery in case of total electrical failure. On top of all that, I'll have triple redundancy with the small back up D-10. This will be a well equipped, excellent panel by Dynon!
PRODUCTS I'VE USED:
Antislip Tape: amzn.to/2TzU32s
Adel Clamps: amzn.to/3ztVsI0
Snap Bushing (you NEED these): amzn.to/3gryDfm
Dremel Flap Wheel: amzn.to/3ztmXle
Air Hose: amzn.to/3wrqezA
Air Hose Fittings: amzn.to/3iIf2dB
Paint Gun (works GREAT for smaller parts): amzn.to/3vqDgMa
Air Filter for Paint Gun: amzn.to/3iHhfX2
USB Data Port (for Dynon): amzn.to/3iLsiOL
My Microphone: amzn.to/35likMa
Paint Mix Cups: amzn.to/2RSM4gc
Fly Cutter (for fuel sender): amzn.to/3gvgXzO
#dynonavionics #dynon #avionics
29 июл 2024