Designing & Cutting Planetary Gears With A Diode Laser

Подписаться 10 тыс.

Просмотров 2,2 тыс.

50% 1

👉👉👉Click on "More" for video mentions and special links!👈👈👈
👇👇👇
I am in the process of designing a working, motor driven clockwork set of gears. This video show the designing and cutting of a set of planetary gears with my Roly 30W diode laser.
================================
VIDEO MENTIONS:
/ hobowithwood
hobowithwood.com/roly
===================================
SUPPORT LINKS:
Any level of support would be greatly appreciated.
Monthly Options
/ hobowithwood
One Time Donations
www.paypal.me/youtubehobo
===================================
LINKS TO PRODUCTS I USE:
Roly Automation Lasers
hobowithwood.com/roly
Super Cool Workbench:
hobowithwood.com/VevorWorkbench
Stainless Steel Shelving Unit:
hobowithwood.com/VevorStainle...
Comgrow Desktop Laser Engraver Enclosure
hobowithwood.com/ComgrowDeskt...
Perfect paper for cutting with your laser.
Hammermill Cardstock, Premium Color Copy, 32 lb, 11" x 17"-1 Pack (250 Sheets) - 100 Bright, Made in the USA Card Stock, 120024R
hobowithwood.com/80lbCardstock
Clock Mechanism link
hobowithwood.com/ClockMech
2.5" Dice Blanks
hobowithwood.com/diceblanks
PREMIUM Baltic Birch Plywood, 3 mm 12" x 12" (300MM X 300MM)
hobowithwood.com/PremiumBalti...
1/16" Basswood 12" x 12" (300MM x 300MM)
hobowithwood.com/ThinBasswood
===================================
Some of these links are affiliate links, but will not cost you a penny more!
Using them helps to support the channel!
laser engraving,LightBurn,laser cutter,xtool d1,hobo,hobo with wood,Laser,Monport,60W,CO2,Diode,Roly,LaserMATIC10,MK2,MK3,laser crafts,xTool,all in one,planetary gears

Опубликовано:

1 май 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 24

@goinhot1 2 месяца назад

Thank you for your help and support Steve…

@HoboWithWood 2 месяца назад

Glad to help.

@ValricoDave 2 месяца назад

Making the hard look easy. Thanks Steve. (BTW, good recording.)

@HoboWithWood 2 месяца назад

Finally found the source of my recording issues... I hope. Hopefully, those Gremlins are put to rest.

@craftingwithjean5599 2 месяца назад

Thank You for another really great teaching. You make it all look so easy. 2!

@HoboWithWood 2 месяца назад

Thanks for watching!

@Jerry-Mesa 2 месяца назад

Thanks Steve. Great video and loved the Sousa music. Had to watch the whole cut sequence (which I’d normally fast forward through) so I wouldn’t miss the music. 😁😁

@HoboWithWood 2 месяца назад

Glad you enjoyed it

@ronnie100393 2 месяца назад

My hats off to you! As we all say I’m not that SMART?? That was interesting how you made those gears !!!!!! Thanks

@DimitriPampoukas-yl1ou 2 месяца назад

Thank you Steve.... !

@jessetutterrow4320 2 месяца назад

It is great to see you doing edited videos targeted at a particular project or technique. I am not a fan of the two plus hour live streams. I can understand the gentlemen's frustration with eMail customer service. Sometimes it is quicker and less frustrating if you could just chat with someone, share the screen, or even talk on the phone. I had this problem with an online learning course. I would have a question and send an eMail, about 8 hours later I would receive a reply which wanted clarification as to where I was in the course, I would reply and then have to wait another 8 hours for their reply. Very frustrating!!!

@HoboWithWood 2 месяца назад

I was struggling with the recording and editing process. Turns out it was a second faulty external drive. I think I have it resolved... I hope.

@herbertbrowning6753 2 месяца назад

Great information! Thanks

@nuka1195 2 месяца назад

Nice video. You changed the height of the A not the width. That’s why the gears didn’t look like they meshed correctly.

@emmastalker1784 2 месяца назад

Hi good design video as always. Could you do something with nesting please?

@steven67856 2 месяца назад

Hi Steve can you tell me what you use to clean your honeycomb with as I use oven cleaner which is very expensive and I need to this out side due to the fumes. Man thanks Steven 🇬🇧

@HoboWithWood 2 месяца назад

LA's Totally Awesome. I get it at the Dollar Store. Use it to clean every part of the laser.

@geoffreylapeire1680 2 месяца назад

I express my apologies to the gentleman who had ordered

@ricknutz7139 2 месяца назад

I may be goofy but I can't find it. After using the camera, how do you usually turn the camera off like I just seen you just do in the video?

@HoboWithWood 2 месяца назад

Go to the camera control tab and uncheck the Show button.

@ricknutz7139 2 месяца назад

@@HoboWithWood I knew it was simple. Thanks!

@louislobis9594 2 месяца назад

I tried to copy your direction could not get the outer ring to work

@HoboWithWood 2 месяца назад

I'll go over it in the livestream tomorrow at 3 PM EST.

@rebeltaz123 2 месяца назад

So... ummm... just for the record, my girlfriend and I do not even OWN cellphones. We use a landline both for our shop and for our home. And it's not a techno-phobia. I had the precursor to the "smartphone" - the HP iPAQ - before anyone even knew what it was. I was programming computers before the PC was popular. I was an electronics technician for two decades. I love technology. I just despise willingly, and gleefully, carrying a tracking and surveillance device.🤷‍♂