Detailed- upgrading 2010 Chevy Silverado Transmission Cooler for towing

Подписаться 40

Просмотров 8 тыс.

50% 1

Here is how to replace and upgrade your stock transmission cooler on 2010 Chevy Silverado and similar models. Using True-Cool cooler rated at 40,000 GVW. Great for towing my rock crawler and keeping the temps down.
Below are the links on Amazon for the cooler, 3/8’s coupler and GM quick connectors. I was able to use the stock cooler lines with some modifications on my application. Most GM trucks and SUVS are set up about the same.
If you like off-roading or would like to message me a question please follow me on Instagram @4xflyin
Cooler
amzn.to/3BfcrS2
3/8” coupler- only one needed
amzn.to/3BbpqE8
GM quick connect- will need two
amzn.to/3BbpqE8
As an Amazon Associate I earn from qualifying purchases

Опубликовано:

15 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 20

@richardhernandez6634 Год назад

Best install I’ve seen out of all transmission cooler installs

@brianfravel440 9 месяцев назад

Thanks for the how to on this install. Extremely helpful. I flattened the bottom bracket and recounted it. My install was slightly different but the connection process was exactly the same. My end result was a great install but also dropped my temperature from 200 -210 ,down to 140 -150. This is awesome. Thanks again and have a great day.

@TheNewFallOfficial 3 месяца назад

Just got all the parts in and I’m doing the exact same setup. Thank you!

@joedorman569 Месяц назад

What was the park number that you used for the gym fitting for the aftermarket training cooler

@bredmayne83 Год назад

So you didnt even have to use the provided hoses? Different than ive seen it done. Have to do mine soon.

@rileywalker9862 3 месяца назад

Whats pn for coupling you used on passanger side you had to cut? Both links on the description are the same

@Roybwatchin 3 месяца назад

Did you notice any change in your engine temp and or your AC functionality? Seems like that much larger cooler will create more heat in front of the radiator which in theory, would cause the radiator and AC condenser to struggle a little more. Just curious if you noticed any changes. Thanks for sharing. Nice job on the installation!

@typicallyzach229 2 месяца назад

I’m about to do this before going on a trip to Oklahoma. I don’t think it will have much of an effect on the AC or radiator, since the air flows straight through, I’m thinking you’ll get a 1 or 2 degree difference on the oil temp, but that’s it. Honestly I’m just trying to save my trans because I don’t want my 6l80 to crap itself

@tommygarcia7406 5 месяцев назад

Why do certain adds show on you tube but not on regular adds on tv.

@scottranes6462 3 месяца назад

How’s that cooler holding up?

@johndeere121698 Год назад

Hey quick question, I want to do the exact same setup as you made but I’m a little confused when it comes to the 3/8x3/8 union, after you cut the section out , do you have to flare the end of it that goes into the union itself?

@adamharlow8124 11 месяцев назад

My question as well. I thought you had to flare the ends for unions

@greedyvision6460 6 месяцев назад

Compression fitting it has the ring inside of it once you tighten it up it compresses to the pipe

@trendkilla254 Год назад

so you are just bypassing the radiator cooler altogether? I thought transcoolers were supposed to be used in conjunction with. Thanks.

@jamessamuel2572 9 месяцев назад

No it’s not bypassed, it’s larger so it can catch more airflow and can hold more fluid than the stock cooler.

@TheNewFallOfficial 3 месяца назад

The transmission lines going to the back of the radiator on the passenger side actually bring the transmission fluid up to operating temperature by heating the fluid once the engine reaches a certain temperature-the lines going to the front are for the transmission cooler.

@jamessamuel2572 Год назад

Did you have to add more ATF? How much?