I really appreciate people like you, who put out short, informative videos on topics like this. I wanted to know what the differences were before I bought them and now I can make an informed purchase. Thanks!
Thanks for taking the time to make this. I don't care about the fold or torque feature, but I want the ring light. Wouldn't have known about that without your vid. Thanks again.
These are great, many screw guns don’t have the soft start and it I’d hard to start a small screw when it starts so fast. This gives you total control. I just ordered one, I do a lot of repairs etc and this should be perfect, it Also has the best batteries also.
Well done. Good info and well presented. (Though the vid resolution is super low. But I'd guess you probably have that and the mic echo issue fixed by now since this is 5 years old.) I'd add that, going by online reviews I've seen since I purchased mine, and had issues, that many folks have had an issue with it sometimes working and sometimes not. (By far the most 1-star reviews I've ever seen for a DeWalt product.) My 682 was one of those and it was extremely frustrating the way it cut on and off. I never knew when it was going to work. But I found in those reviews a few people being helpful and describing that the issue is the battery making a constant connection in the body. What I read suggested taking the battery apart to sproing [technical term] out the contacts on the battery. I'd just moved and couldn't find my security bits so I couldn't take my battery apart but I _finally_ managed to find a thin/sharp tool (that was also strong enough) to be able to reach into the very tight space and lift the contacts enough to bend them such that good contact is made w/ the contacts in the body. After that it's been working beautifully! Nary an issue. Not once. And, for musicians, it's ****ing perfect for stringing/unstringing (or simply loosening strings to adjust truss rod or whatever) guitars and basses! Also works great on drum heads! I use mine so much for that, that I'm likely going to get one of the swivel ones for everything else that doesn't call for getting out the big guns. This works better than anything else I've tried for that purpose. The amount of control is simply amazing. I wish I could feather all my screwguns/drills, and other power tools, so precisely. None of that "oops, too much" or trying to very careful nudge up a trigger to hit the speed/torque you want. By now, it's starting to feel like an extension of my body almost. That said, the 682 at least isn't very heavy duty but I have other tools to fill those needs. Note I'm also hearing and seeing that DeWalt is no longer making the batteries. (WTF?) Are they going to quit making both screwdrivers? That would be a shame if they're not replaced. But, as far as I can tell, those two are the only 8V products. I could see an issue there. Cheers!
Man, I have had the folding one for probably 4-5 years and just always thought it didn't work. Never occurred to me to turn my wrist. Unbelievable!!! Thanks for the video!
Thanks for the review. That was really helpful, but you didn't say about the torque!! The right one is the torque power fixed on it?? Or how it works? Because the left one you can change it but the right one doesn't have a clutch!!
I have one, but the palava to get one in UK is brain numbing... Dewalt US seems to have the toys and Dewalt UK seem to be the back-markers. Besides that, even though your great video is 4 years old, these little units, if you can find one, are twice the price you stated... in GBP numbers! UK/US trade is a joke. But, nice toy. Nice video.
The foldable one appears to be a bit smaller? Need room in tool bag. Bought one but battery is not staying in properly so unless I put the heel of hand to hold it tight it won't work.
Hi I have drill into hard surfaces to install a barrel bolt on awood door and the clamp housing it slides into to lock the door, on/into a hard metal door frame. Is this a power tool that you think this will do the job of drilling with a hard drill bit into the wood and the metal? If not what is a good recommendation for a under 50-100. drill tool. Thanks / great review / new sub > nyc
You might be able to get it done if you go slow and might have to recharge the battery. This tool was made mostly for small tasks around the house. Drywall screws and the like. Maybe an occasional hole in some thin wood. If you use some self tapping screws, you might be able to get it in the metal with ease.
I love the screw driver. But I still don't see the point why push a trigger and also you have to twist hand. Double work. I wish they had just a trigger version.
The way you use the 'trigger' is you basically just hold the tool, which you have to do anyways, with or without a trigger. This just allows for immediate changing between forward and reverse, without messing with an extra switch.
peacelesssam it’s molded to fit in your hand with it on top. If I got two left shoes I can just put one of them on my right foot, but it’s more comfortable to use them like they’re designed...
Great concept, but horrible manufacturing. I'm on my 4th one in 26 months. I'd happily pay 2x the price if they were made better. But that's been the sad case with Dewalt as a whole since 2018.
...uhmm....yea...everything sound"good"....Of course..I "want" it something like that..for a couple years...without any problems...but..at the end..when you need it..the "gyroscopic" doesnt work..and a lot of problems start.....and finally I have to throw it away...Better to use my old fashion tool ...they never fail..../.
@@mdeamicis ...That tool ..is new..Personally before buying any tool I read many reviews...(as much as I can) I got a couple tools...different brands..but the one I trust is makita's tools (special the one made in japan.Never fail) I put my hands on fire (for makita), and I know I dont burn./.
@@danmorgoshi7598 that is just brand loyalty. You just picked a name and fell in love with it with no evidence. Also, why do you talk so weird with lots of dots? Very very strange.