A beautiful System. I used the Deye 12kw version with 4x4,8kw Dyness A48100 and works great. Thx Deye for this perfect Hybrid-Inverter. I come from Germany ;-)
What is the difference between home loads and backup loads. and why at the zero export to load situation dont need the ct's and from the other situation needed?
I am interested in the SUN-12K Hybrid inverter but have a question. Can the SUN-12K-SG04LP3 3 phase inverter be used together with a 1 phase Microinverter (E.g. SUN2000G3) on the GEN input, or is it only possible with 3 phase input on the GEN Port ? (with Micro Inv. Setting) If it is only possible to use 3 phases on GEN port, do the phases have to be symetrical or can they have different wattage ?
Is it possible to set my inverter to power the loads from solar and battery, and only take from grid to power loads when batteries reach a lower level? Reason being I want to only use power from the grid (to power loads) to save not buying power
In some cases we couldn't sell to the grid. It will be nice to have such cases described. For example I am not able to get appropriate license for now in particular location, but I still need to use this invertor as a backup. Nothing horrible will not happened but everything to the grid will be treated as consumption of power.
Hi! I have a DEYE SUN-10k-G (grid tie), how many strings of PVs this inverter can hold? currently i have 2 strings connected of 5-550w panels each. I plan to add another 2 strings to max the harvest. If i can still add 2 strings, can I use higher capacity rating PV, like 680w 0r 720w? my roof cant hold many more PVs that's why. thanks!
Hi，if selected, when Battery SOC is less then “Low Bat” value, the self-consumption power of inverter will be from grid and battery simultaneously. If unselected, the self-consumption power of inverter will be mainly from grid.
Good afternoon, can you help me with this problem.I have a 10 kw 3 phase Deye inverter.I connect a 7 kW car charger, one phase.12kW solar panels (there is a lot of output, the inverter at the same time reduces the power of the panels).In this case, the following happens:the production of panels goes to zero, pulls 6kW from the battery (200Ah charged) and 1kW from the city network.Previously, I did not take it from the city network when charging the car.Is there something wrong with the inverter settings?
What is the sense of charging battery from grid to 80 % starting at 1:00 am and dicharging battery at 5.00 am ??? Battery life depends on charge cycles...
hello, i use deye 12 k 3 phases , i use a diy lfp battery have a passive bms and i use volts parameters instead of bus can , why the deye not respect set voltage at charge ? i need use solar sell and send to grid all is possible to limit the voltage at 54.8 v is my peak required voltage ; i have also a 8 k mono and this one alaos never stop dischage battery at 50.2 v as i require i used a voltronic before on at this point it was far better , the problem is voltronics are not so fast power ajustement to load ans also not very reliable and noisy
I have the deye sun 12k hybrid inverter. What is the correct setting to reach the following targets: 1. Use solar cell power to power the home load first, the battery second and send any exceeding power to grid(zero export to ct plus sell power?) 2. Use the battery, when power from solar is insufficient until 10% of battery capacity is reached 3. Do not load the battery from grid 4. If battery power is less than 10% and solar power is not sufficient, take missing power from grid to power the load Idea: battery should only be loaded by solar panel and should support solar panel to give the power to homeload until the 10% of battery is reached. System now should not use the battery, but take the load from grid, if necessary. Nex time when there is sufficient power coming from solar panel will power the home load and them recharge the battery. If battery is full send not needed power to grid. Thank you for your support
Saya ada masalah dengan Deye inverter 12 kw 3 phasa dan ini beberapa material yg saya Gunakan : 3 unit Inverter 3phasa/12 kw Deye inverter 48 pcs solar panel @550 watt " jinko" 15 pcs battery 5 kwh 48 vdc " Lithium " Delongtop " shen Zen Setting battery Lithium pada code batt : PYLON ( 01/19 ) Tidak bisa di setting : 00 . Semua berjalan normal pada setting "Lithium batt " mulai jam 7 pagi sampai jam 17.00 sore ,tetapi saat program masuk di jam 18.00 ,battery cuma terpakai 700 watt . Grid terpakai 1.600 watt. Beban : 2.100 watt . Pertanyaan saya kenapa batteri tidak bisa bekerja maximal padahal battery kondisi penuh . Mohon ada penjelasan dari " D E Y E "
