Diamabrush wood deck paint removal how to remove paint from wood fast and easy part 2 

I can’t even tell you how thankful I am that I found your video. I’ve tried strippers, sanders, scrapers, and had started flipping the boards. The screws were completely rusted so I had to saw them in half before I could finally get the boards up. Took three hours to do 8 of them. Then I saw your video. $60 for the Diamabrush and one hour later I had totally scraped off 2/3 of that Deckover garbage. THANK YOU!!!!!! You saved my life and my deck! I’m sharing this with everyone I know!!!!

Can’t thank you enough for these videos. My deck was in the exact same situation and this works like a charm

Thanks so much for your videos and recommendations. I ordered all the tools needed to remove the paint on old front and back porches. You made it seem easy enough.

AMAZING! Thank you for your diamabrush information.......after spending $1500.00 on top brand liquid deck stain removes and hiring professionals that couldn't remove it......I finally smartened up and went to You Tube for the right advice! Yes this product works beautifully. Costing $60.00 at Lowes and doing it myself in 2 days ...Amazing, thank you

I would like to thank you for putting up this video. This product seems just like the thing I need for a big paint removal project on my porch. Not all heroes wear capes sir.

OMG. I bought one this week for my deck. It just has a thin coating. You did a great job!

Thank you! I have an enclosed porch with 20 years of ppl just painting over every layer. Even a belt sander was taking forever. This is going to be so much easier

You saved the day with these videos. I have the same exact deck as you. That nasty behr deck over. Ruined my deck. Faded in just a few months and I used blue. So now I have to start fresh. My deck is so splintery because of the power washer. I wish I seen your video a few weeks ago.

Your absolutely right. If not prepared correctly the deck over will not adhere. I spent a day preparing and filling cracks then applied the product with great success. Its been 3years and no issues. Great video! Ty

Anyone planning to do this really should wear eye protection and a light dust mask wouldn't be a bad idea either.

You did a nice job I got a diamabrush and a grinder gonna try and do my deck I hope I am successful as you and your deck!,!!!!!!!

Can’t wait to see how it turns out. Looking good so far. No easy way out for a job like this. I did mine last year with a lot more work than your system. Hope you can soon sit and relax with a nice cold beverage and enjoy the fruits of your labor.

Super thanks! The best video on this DIY for decks!

That diamabrush tool is amazing. Thanks for the follow up video.

Awesome tool and awesome job bud! I bought one myself for my old deck...cant wait to try it. Gonna safe me a ton of aches and pains! JR Shout out from Timmins ON Canada

Thank you for sharing. I started using a belt sander on my deck. Way too slow! Going to Lowe’s today to get this tool. So much faster!

Try it with 3 layers of behr deckover with granules in it. It wears down all discs and diamabrush twice as fast. Getting ready to heat gun a deck.

I love this! Hope my husband will agree to do this with me on our porch!

Thanks for your detailed and real time video. Very informative

Think I'm going to remove the guard on mine like you did. Seems to be a lot easier to fit in tight spots....thanks

This worked amazingly!!!

Awesome video, great editing. Thanks for showing this in action. Subscribed for badassness!

I will also be getting the DimaBrush for sure!!! So much quicker than using chemical products and waiting forever.

Hi, great video. Like you I'm a DYI guy and I fix cars and other home stuff. I'm still waiting on the follow-up video where you paint the deck... how about posting what paint or stain you're using. Thanks.

Great job Quick question what is the rpm on your grinder Hopefully you’ll post more on this subject

Thank you for the video. The correct respirator, protective glasses and even some ear protection will go a long way. There is nasty particulate matter being inhaled and flying about.

Que buen video, gracias amigo este video es espectacular.

Hello thank you for your video I have bought the Dimabrush disc ,could you please let me know what grinder to buy Sincerely Doris

Thanks for this valuable info, can you please share what stain you used and any advice on that please. thanks

This video is amazing. Thank you so much for sharing! Did you have to sand afterwards? Thanks again.

Wonderful video

Tomorrow I plan on buying the grinder and diamabrush. I have three coats of deckover. Do you think the diamabrush will take it off? I saw someone comment that it didn't work and he was going to use a heat gun. Thanks

Looks like a great product. Thanks for sharing the idea with us. :)

Do you have a part 3? Curious to see how it turned out. Did you stain or paint again? I’m trying to figure out what to do with my deck. The rails still look good with paint but the decking is chipped and peeled pretty bad.

Hey. Got a DeWalt angle grinder and Diamabrush, and dust shroud - got about 1/3 of my 400’sqf deck done and need to replace the brush. But I can’t get it loose to remove the blade. It’s an older deck with lots of nails & screws that we are trying to avoid or go lightly over. I knew I’d need at least one more blade. But I’m stuck until I can get it off. Any suggestions?

Great video! I just started my deck using an angle grinder. How much angle and force should I use when starting off? I’m worried about making a divot in the wood

How did you remove the paint from the bottom of the deck between the spindles? The tight ares that the grinder won’t fit into?

If you don’t recommend Deck Over what product are you planning to use to finish your deck? What will you use in areas where there is more damage, like on the railing you showed?

What did it look like once you stained it? I’m halfway through my deck that had deck over and I’m wondering if every imperfection is going to show through the stain

bought a house, prior owners painted it grey. screws and nails popping up and the wood is splintering and cracking in different areas including the posts/joints. this video is going to help me when i finally need to redo this deck. can you give a step by step guide of video w/ links to the products you will use etc. i want to do it right when i go to do it and seal it properly from rain/snow etc. i'd hate to have to redo the entire deck and much rather replace only what is needed. at this point im hoping the board the deck connects to the house is ok because these people before me definitely only band aided the situation instead of doing properly. any advice/help is wanted and thank you for making these vids.

I can’t wait to get started! About how many brushes did u go through ?

Hi I love this! Do you think I could use this for a fence? I painted it white last year & now I hate having a colored paint & now just want to stain my fence. Can you help me please??

How'd you remove from between the boards on the floor?

Great video, thanks! Can you provide to link for where to buy the brush you're using in the video.

In part 1, you mentioned how you’d use a 120grit sandpaper to get rid of the swirl marks. Is that what you did and did it help?

This product is extremely hard to get (only through amazon pretty much) and costs between $80-$120 in Canada... I think I'm still going to try my chances with chemical paint stripper first. Maybe I'll be lucky. On that note, wear a dust mask, eye protection and gloves when you're doing this kind of work, I'm usually not hard into PPE (I'm in construction engineering myself) but I've seen some nasty stuff before. Funny story, I used to work for a company doing bridge assessment and bridge load tests, on one job site (construction was done) my boss told me "wear a helmet FFS!" and I thought "what a BS, no construction activity here". I took it off for a few seconds and then the wind gust blew one of the ladders straight onto my head... That told me that unexpected usually happens at the worst possible moment lol. Another story when I was called to run a finished construction structural inspection, I was told no PPE required because it's finished and no construction activities, then I stepped on a nail lol.

This diamabrush works wonders but what do you use for hard to reach spots? Hard to get in between floor boards and tops of rails. What do you suggest?

Dude, get some safety glasses and they also make a vacuum shroud for this thing to suck all the dust and stuff away so you don't breath it.

Would you recommend Cabot Deck Paint? I’m going to start my deck this week and wanted your thoughts. Thank You

Nice job and thanks for the recommendation! BUT WEAR A MASK, EARPLUGS , AND SAFETY GLASSES your body is more important than any deck lol

How many blades did you use. And what size is deck ? Amd does it need be sanded also. ?? The info says prep included using this

Thanks

I can't get between my spindles or rotate them like you did yours, what can I use to get between mine?

Awesome product. Dust mask should be considered mandatory. Microscopic paint particles in the lungs is a recipe for future health issues on a large scale. If I am wrong about this I would still rather be safe than sorry. Great video otherwise! Thank you :)

Hey boss so I can use the diamabrush with any grinder ?

Dumb question, but I am going to ask anyways. Does the tool remove oil based stain as well?

Bet his neighbors loved his technique lol

OK curious to what you did next, I don't see finished product!

and where does not reach with the diamonbrosh how is it done

After doing all the sanding with the dimabrush how do I smooth the wood to make it look cleaner and what stain do I use ?

Hi, would that tool get the green algae out as well do you know?

What kind of power tool can you attach the diamabrush to?

How’d you clear the paint of the edges of each board?

How many Diamabrush did you use for how much square footage please guide thanks

Oh very nice. Nice work man. You going to cleetus n cars this Saturday in indy?

can someone please tell me what machine i need to use the diamabrush?

Would you recommend using it on a hardwood floor?

Did you use the Diamabrush on the rails or was that a angle grinder with a disc? If so which disk? I’m on my way to Lowe’s to get the Craftsman angle grinder and want to know which disk you used. Almost done with my deck but a bit of rain slowed us down. Should be painting by next week depending on the weather. Seattle for ya!!!! LOL

I have a deck in the same condition. I do not have any of thr equipment. I do I need? I live in CA , the nearest hardware store is Lowes, Home Depot, and Ace Hardware. I really would appreciate any assistance. Thank you.

I didn’t used to use safety glasses until I had to go to the eye doctor to get something out. A canister respirator wouldn’t hurt either. But that’s just me

What is the tool your using?

Please where can I purchase this contraption?? I need it ASAP 🙏🏽

What’s the name of that tool

nice deck. its so big...sorry, someone had to say it lol.

Your neighbors must have been hating you. 🤨 But it looks good.

Maybe you can help me. I got this product and a dewalt angle grinder and it just keeps over heating and smoking. What am I doing wrong?

Let's get back to Camaro's, forget the household chores..

Eye protection? Dust mask? Ear muffs? Gloves?

please use safety glasses when using this tool.

Safety is no concern is it😂

I bet you were coughing for days after that. reaching in all thqt material with no masking I also hope that was not pressure treated wood. Toxic stuff!

So why not wear a mask?

Dude isn't even wearing a mask or eye protection!! Wow... 😳