Diana Chaser Kit .22 Cal 

You can store a CO2 cartridge in the pistol grip too.

Bought mine today. It's a really quiet and straight shooter! Of all the C02 airguns I've tried, this is definitely my favorite!

I got this for wife because very quite, light and she likes the form. Just a heads up in case you aren’t aware; the moderator fits the pistol barrel, BUT, factory used the serious lock tight on the threads. Can boil water and insert thread section for a good minute or use a heat gun- maybe a hair dryer. I used boiling water. Worked like a charm. Thanks man

I was surprised how accurate the Chaser Kit is. Nice video brother.😎

I already have the Diana Airbug in .22 cal. Love it. I'll have to get me one of these Chaser Rifle Kits.

I think it's doing what it's supposed to. Great video. & it hit target quick. No real delay at 500. & quiet too. Love that longer barrel ! I'm definatly getting one , !

Great video and overall review, the rifle is also great to tinker with, almost built me entire RU-vid channel off of this gun.

Got one…love it

Been watching for one of these Diana Chaser kits for quite a while now. Definitely would want one someday. Not even expensive. Way cool with a pistol-rifle combo. Got an Umarex Morph BB pistol-rifle - which is so damn nice to own. Light as anything can be - but shoots hard af. This Diana would then instead be a fun kit for pellet shooting. Way neat of a video!😊👍🏻

i switched my diana bandit and chaser kit. made my own little hybrid rifle . 18 ft lbs. put the regulator in it turned it down to 15 and made it my truck gun. 20 shots per fill . shooting 16 gr perfect quiet and straight shooting. great review as always

Very cool just got mine for Christmas. Have to wait until spring to shoot it. Thanks for the great preview.

Good Afternoon Nice Gun💯🤙😎

Pretty versatile kit! Looks like alot of backyard plinking fun 💯 _I debated getting this or the famous 2240 for a while but I just pulled the trigger on the 2240 for the customizations and parts avaibility here on Kenada... but id sure like to try one one day even if they are only avaible in a 495fps version here and might be banned soon._

Love mine :) I moded my .22 & am getting above 10 foot pounds of energy which isn't bad for a CO2,... Clean kills of Starlings @ 30 yards without holdover :)

The magazine sold me so I ordered two.😎

I love co2 powered hunting pieces . Check out the QB78 .

The Diana Stormrider mags work as well. I have one of these kits as well and love it. Usually leave it in "carbine" mode though. Sadly here in Canuckstan suppressors are prohibited even on air guns.

I have the .177 and .22 👍😉and yes tyrone is the cp2 expert 👍😉

I want one !!!

I put a Froggy's Airguns drop block on mine and I'm running a 15ci 4500 psi tank that's regulated to 800 psi. I can shoot a 500 count tin of pellets between fills.

Have one and i love it!! Except here in canada it didn't came with the end of the barrel. Gov. Say it is a silencer/suppressor. Wich is illégal. And there is a window to see if there is co2 in the chamber nice vidéo. And i don't remove the rear sight on the pistol when going to rifle. Very accurate from the box. .this thing shoots!!🤩

The Barska 3-9x32 Scope for about $40 is PERFECT for the effective range of this rifle & holds zero very well :)

Can a Laser be put on the receiver ? ? ? ? Are the screw threads in a standard location? Thank You! Dave

Their slightly costly. But I would love to one in each caliber. .177. & .22.

In pistol version is this hitting harder than the Diana Airbug?

Does it come with two 7 shot rotary pellet magazines with the kit?????

Hi off the Shelf I have a chaser and I like it a lot it shoots great . Have you try to put a suppressor on the pistol Barrel I was thinking about trying one of buck rails suppressors on a pistol Barrel if you tried it please let me know this is old George from Northern California have a great day

Wes sells a regulated pcp hand pump friendly version of this puppy!

Very nice gun man is that the one that you can turn it into a rifle

Help please, my girlfriend bought this Chaser single shot and before I got home she had tried to use it but said no pellets came out after about 5 tries. She said she kept loading them in and pressing trigger but no pellets came out. I think she jammed the pellets in the barrel, because I shine a light and cannot see thru the barrel and I put a flexible plastic line (section of weed eater plastic line) and it will not go through the barrel. If I put the plastic wire from the breach side it only goes in about 1/2 inch, and from the barrel end side it travels about 7 inches but doesn't appear thru the other side. And I idea how to clear it? I assume push from the breach side but the plastic is too flexible but a hard rod cannot push them from the breach side. Any help how to clear it?

Hello, co2 tube, how much do you throw a bullet?

Great review video, thanks for posting. Walnut & Steel sent me here. @African-Budget-Pellet-Gunner (Tyrone) convinced me to buy one with his reviews and mods. I bought the pistol kit in .22 also, as soon as I shot it I got online and bought a Stormrider. I keep the Chaser in carbine configuration, the Stormrider handles the rifle duties. The magazines are a must. The Chaser kit is an incredible bargain..... I think I paid $120 for mine, delivered.

Dragon fly.... I would put on a 3D printed silencer..... In case that you double load With the magazine and damage the silencer...?... I could be wrong but I thought I saw someone said that they damaged their silencer

CARM magazine’s are superior to the fussy Diana mags.

Is it good enough to kill a iguana?

But just, where are you at?, Mr Reddick? Not around just aproxymently?

Co2 does not perform well in cold weather

Is the moderator welded on to the rifle barrel, or can it be removed? I live in California, and we're not allowed moderator if it's removable.

Anyone know where to buy just the stock/grip?

Hello, co2 tube, how much do you throw a bullet?