Diesel Service Truck Life Doing Brakes on Hino Box Truck 

Thanks 🙏🛠🧰💯

the greek guy viva-greece yes should have electric lift pump. Does yours have Davco type fuel water separator I fill those full fuel also. I do same key on and off couple times. When cranking hold throttle pedal to the floor until engine starts. Then keep revs around 1500 till running smooth should have no air in fuel system.

@@ZepolWorkzGarage yes has that Davco type filter also.. thank you... was not sure cuz our kenworth doesnt, it has a primer pump.... THANK YOU!!!!!!

Yes truck was a Hino 338.

@@ZepolWorkzGarage Greatly appreciate your help & kindness🙂 I just bought a 338 in Boston & drove it to the west coast ( just cab chassis) . I changed the oil behind a harbor freight in new Hampshire. The oil plug was so tight a 3/8 breaker bar wouldn't get it & I'm not a Lightfoot I weight 245 pounds & I'm fairly strong. I had to go back in harbor freight and buy a 2 foot long 1/2 drive bar and it was still pretty tuff and I even hit it with pb blaster🤣

@@kylerich3771 that's why I always have a 3ft pipe to slide over breaker bar for more leverage. Thanks for Comment keep wrenching.

@@ZepolWorkzGarage Amen & take care😁

@jessiefitchett5354 no I don't have one it's about the same. Springs little different design. If I get a chance I'll try make video on steer brakes.

Yes the rear Brakes are the same on those years as well.

Have to call tire shop for prices.

Liquid Wrench is good it is a penetration spray. WD40 is a water dispersing spray. There both ok as long used for what made of.

The front brakes go on the same way just a smaller brake shoes.

Abdullah No Last Name You have to look at lower shoe was almost at 1/4 and Customer didn’t want chance it till next Pm. DOT Shut you down quickly and start looking at other stuff.