DIFFERENCE BETWEEN HAMMER DRILL DRIVERS & IMPACT DRIVERS (Ultimate Guide Tips and Tricks)

Подписаться 607 тыс.

Просмотров 321 тыс.

50% 1

DIFFERENCE BETWEEN HAMMER DRILL DRIVERS & IMPACT DRIVERS (Ultimate Guide Tips and Tricks) In this video we explain to the #verycoolgang the big difference between Impact Drivers and Hammer Drill Drivers and which one would be the best for your needs. A traditional drill driver comes with a 1/2'' chuck which is one of the main differences from an impact drivers 1/4'' collet and we explain all the differences in this video! Nowadays these new power tools have a lot of technology built into them, like Bluetooth to connect a tool to your phone! We also give you some tips and tricks when using these two different tools and we explain how to determine which battery you should use and will need. Please make sure too leave anymore tips and tricks down in the comments section below and be sure to share this video with someone you know who could use this ultimate guide! If you learned something new let us know about it in the comments section below.

Хобби

Опубликовано:

29 май 2020

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 630

@lisaferrara8120 4 года назад

WOW! This video was extremely helpful. I had wondered which driver was the most versatile, and you answered my question. Love the tips at the end!! I’m from Philadelphia, too!

@VCGConstruction 4 года назад

Awesome Lisa, we’re neighbors!! 👍🏻

@OfficialFatLip 2 года назад

But what about compact 12v hammer/ impact drivers?

@bigrobbyd.6805 4 года назад

Deep down, Nick always wanted to be an orchestra conductor.

@CTEKGUY 3 года назад

JC...🤦🏻‍♂️🤣 Video was super entertaining & informative! But THIS comment...🏆😅👍🏼

@millermart777 3 года назад

I was thinking more along the lines of too many late night/early infomercials. It's a subconscious audition for the Home Shopping Network lol

@BoneCowboy 3 года назад

🤣🤣🤣

@elbacanreal 3 года назад

They should let him use the bathroom.

@ForFucksSake57591 3 года назад

😂😂😂😂💀💀💀

@rustyb78 4 года назад

Moving those hands around like Scotty Kilmer.

@Luca-mv5ku 4 года назад

I was thinking the same! lol

@xoxsolidusxox 4 года назад

Using your drill driver will lower its life

@kylelake3262 4 года назад

I wouldn’t even call Scott’s a mechanic

@kylelake3262 4 года назад

Scotty

@christophercrawford2736 4 года назад

Rusty Bryant 😂

@billyx6589 2 года назад

@15:06 is the funniest statement ever! "We're in 2020 pops!" Thanks for the demo and the laughs bro 😂

@Borescoped 4 года назад

Regarding drill bits in an impact driver: they aren’t made all the same. Some are impact “ready”, meaning they are 1/4” hex shanked, to fit into an impact. Other drill bits are impact “rated”, meaning not only are the 1/4” hex shanked, but the manufacturer of the drill bit intends for the user to be able to use them in an impact driver if the user wants to, and that the bit should be able to handle being impacted by the tool.

@boosted2.4_sky 4 года назад

If it's got a quarter hex on it.....put it in the impact!...🤘

@jmackinjersey1 4 года назад

If it has the little cut around the end of the hex and is rated as an impact bit. I've seen hex shaft bits used in impact drivers not only fall out, but also twist or even shatter, because they are not designed to be used in an impact.

@badlilstang 3 года назад

I grew up in residential construction. My Dad owned an electrical company and we wired up a lot of nice homes that were fairly big. Before 60 my Dad had blown out both his shoulders and had both replaced. Hardest working man I ever met. I can't agree more with what he says about tool weight and saving your body!

@PaulRudd1941 4 года назад

I've been an HVAC installer for about 5 years, I love my Ridgid tools, the lifetime warranties are unbeaten in the industry. The only gripe I have with them is that they just don't have the range of tools that Dewalt or Milwaukee has.

@mjc8761 4 года назад

Happy Saturday thx for the comparison Nick & for the tricks & tips!

@nicholasfattizzi6168 4 года назад

simple tip I learned the hard way when I was an apprentice. I'm sure most will say I was obvious but never put your head close enough to the drill where in the case of bind up like it did to Nick it knocks you off a ladder . Sounds stupid but there's plenty of situations where you can end up learning this the hard way.

@VCGConstruction 4 года назад

That’ll knock some sense in to you!

@tekoa.9450 4 года назад

@@VCGConstruction 😂🤣😂🤣😂👍🏾

@theaniahlator7954 3 года назад

You can't fix stupid, but you can slap sense

@WindOfTheWisp_Janine 4 года назад

Thanks for another great video! Learned a lot...especially to be careful with a powerful drill driver due to the high torque they can produce. Huge fan of Kobalt stuff...will be ordering the new $399 (!) 5 piece XTR combo kit with rolling case, when it becomes available for shipping online. Just wanted to mention for folks that may be new to how impact drivers work, that the impact is in the rotational direction of the fastener, whereas the impact with a hammer drill is straight ahead, in line with the bit. Thanks again!

@CMOS357 3 года назад

First off I'd like to say a damn good video! I just watched on another channel a video stating drilling is best left to the drill but after watching your very explicit demonstration I agree with your video the impact driver with the correct impact drilling bit is a much better option and easier on the body. Plus I appreciate the tips and tricks you gave on how to remove a screw that has a stripped head and how to use a screw as a drill bit - That's what I call real 🌎 world construction 😎👍 knowledge.

@Griffers211 4 года назад

Just an FYI the reason they say don't drill with in impact has more todo with the material the bit is made from and not being an impact grade metal. With soft woods it is probably not a big deal. But harder woods, metals, and so on you could crack or shatter drill bits in an impact over a drill. And that's from the constant impacting that is taking place. And I've asked manufacturers why they put the 1/4" end on drill bits, and the normal answer I get is that's what sells. Just thought I'd share what I found in my years in the tool trade. Otherwise great video love watching. Go Dewalt!

@cdgregOG 4 года назад

Some really nice and helpful starter info here, thanks Nick!

@MarzNet256 3 года назад

You can also get a 1/2 drive to hex adapter to turn larger impact guns into hex drive. In addition, can use a 3/8 to 1/2 increaser (impact rated) to use the hex adapter with 3/8 drive as well.

@chrisgeoss2543 2 года назад

I work at lowes on the overnight shift. I also just happen to work in the tool department. I got a great deal on my 899 dewalt impact wrench...I only paid 250 bucks....a week later it went back up to 350 dollars. I love my job!

@srtorres221 4 года назад

Thanx for the great tutorial on the difference. I'm just getting started on woodworking as a hobby and this definitely cleared up some questions I had with my impact and drill driver.

@abishekrodriguez4408 3 года назад

I used to work with DeWalt or Milwaukee and I used to work as a contractor for 7years and I've quite a bit of experience, it's kinda happy for me to see professionals giving tips

@danielborja9751 3 года назад

Which do you recommend is better Milwaukee , dewalt or , makita ? I’m thinking of purchasing a dewalt 7 piece kit from Home Depot for around $499 just wondering if it’s a quality tool company

@bobs6129 3 года назад

@@danielborja9751 you can't go wrong with any of them really but I like the deWalt better it seems like you see specials more often and they have a wide variety of tools so if you have their batteries more than likely you'll be able to find a tool for a specific trade where the others are limited.

@MysticNessly 4 года назад

After seeing your demo, it looks like no need for drill driver! This makes my decision easier. Have to put cabinets up. This seems to fit bill. Thanks for the class and tips! much appreciated. Didn't know a lick about powertools, but now I know a lot more thanks to the your video!

@VCGConstruction 4 года назад

Thank you for the awesome feedback!

@juicewatter 4 года назад

I recently purchased the DCK299D1W1 kit with the 998 with 8ah and 887 with a 2ah battery, I had a 885 impact already which I use a lot at work, and this new power detect drill is a monster, makes drilling all the holes much easier and faster when I rough out, I use my impact still to drill holes when I need something smaller to fit in spaces the 998 won’t, outstanding tools and always a great video from this channel.

@MichaelSmith-57 2 года назад

I bought the same kit November 30 2021 and love both tools. Just a DIY’er but really appreciate quality and what this kit contains!

@98Bouron 4 года назад

Never would have thought to drive with an impact. And never would have thought to tighten the Chuck of hammer drill to a screw. I've always used rubber band on a bit to get out stripped screws. Great tips guys!

@gijoyjoy 2 года назад

This is such a great video! I really appreciate your thoroughness on the clutch and those power settings. I always wondered what those meant. Great job!

@user-qg6fy4yp8t 4 года назад

Nick good video thanks for all the tips and the knowledge sharing with the very cool gang! I'm using the Bosch 183 hammer drill, the impact Bosch Frick first gen for my woodworking and for my home maintenance ( drilling in concrete, blocks, changing car tires...). So thanks for everything and for your skilful assistant😉

@t.chrisrobinson2388 4 года назад

Thank you! Not easy to find this information!

@Shirodx 4 года назад

True. Please keep the teaching and learning for some of us noobs.

@Xedgehog1 2 года назад

Love this...I work at a home improvement box store. This info helps me sell correctly.

@reagomyeggo 3 года назад

I smashed that like button! Thanks for the tips!

@NinjaBurg3r 4 года назад

Powerful shoutout to Norm Abram. Used to watch The New Yankee Workshop with my dad before school when I was young and he really helped cement my fascination with tools and building things!

@thatboredguy5951 3 года назад

Holy shit you just hit a part of my childhood I totally forgot about!

@zoalord12 3 года назад

Thank you for this awesome review, saved me money on buying another tool for the drilling, i already have the driver. Ordering the correct drill bits (quarter inch hex) which i didn't know about and I'm done.

@iu1191 3 года назад

Very informative! Thanks for the video. Really helped!

@camdenj2010 2 года назад

Thank you! This answered many of my questions and I now understand the difference between them which will help me be more productive and efficient! Great video!!

@pr0xZen 4 года назад

Coming from a background in concrete rework; core drilling, big hydraulic concrete sawing, diamond wire sawing etc, my fav love tool maker and company is Hilti. But having to quit because of an accident, these days it's mostly Milwaukee for me. Top shelf power, build, very good quality, for what just a few years ago was midrange prosumer priceclass. After a severe accident, my work now is microsoldering. There my fav brand is very much in the same vein (top quality and performance for prosumer price; Hakko).

@bobs6129 3 года назад

This price didn't matter nothing really touches the Hilti but they are ridiculously expensive

@thumbtop9562 Год назад

Super helpful! I just bought a DeWalt Impact driver and this vid of yours really gave me all info I need to operate it properly. Thanks.

@MrJose123704 4 года назад

“ never go too deep!” 😂

@aristeocortes973 4 года назад

That’s what she said🤣

@AdminTechnopedia 3 года назад

As long someone doesn't screaming if it's hurt, than deeper is not the matter .. this is a fact boys and gals

@ronwilliams329 3 года назад

go deep or go home!

@linuxlegion4312 3 года назад

Nice one

@josephmalinowski6817 4 года назад

When it comes to paddle bits Daredevil is by far the best and it happened to be on this channel I asked a question about a good spade bit and thank you to New Jersey Workshop for pointing me into the right direction because I never had a problem my bits thanks New Jersey Workshop

@battles423 2 года назад

Just got my drill and impact for Christmas 2021. Awesome video.

@motorman1700 4 года назад

I learned a lot today! Thanks!

@DaveSincere 2 года назад

This is probably the BEST video on the difference between the two drivers / drills. Thanks my man!!

@galefraney 4 года назад

Great video, really informative and easy to understand for beginners like me. Thanks!!

@themeat5053 4 года назад

Nick, thanks for a great bit of information.

@rellorellin7544 2 года назад

Great video. Thanks for posting. Learned a lot.

@susanjessop4408 3 года назад

Wow that was an amazing video for a beginner. I am new with tools as I have been doing wood pallet art. I have watched several videos but this one is by far the best. East to follow for a beginner and tons of information.

@bluemantom77 4 года назад

Nick you the man 👊 I appreciate everything you do

@VCGConstruction 4 года назад

Thank you for the support Thomas!

@DCDamian95 4 года назад

“Stop using me so much, you’re blowing me out!” *cue Michael Scott*

@jmackinjersey1 4 года назад

I guess that is fitting for a DeWalt.

@kylelavallee2505 3 года назад

That’s what she said

@jdmeaney413 3 года назад

I agree with everything you said, only problem is you need the hammer drill for concrete.

@sandrogasparferreira7439 4 года назад

Thanks, very useful!

@evieville3347 3 года назад

I was watching another video on the difference between the tools and I almost fell asleep. Then I picked to watch this video, again. Again, because I’ve watched it before. It’s entertaining and informative.

@norbac 3 года назад

Good video, valuable tips. Thanks dude!

@rubencarlomartinez5315 4 года назад

Nice info for a newbie in powertools. Good videos! 😏

@jaw3895 2 года назад

Awesome video, thank you!

@joshbenton810 4 года назад

When i started my apprenticeship, i was prewiring a house, and had my drill and impact with me, the qualified guy told me to put them away as the cordless stuff isnt good (i had a dewalt 996) I then proceeded to drill faster and didnt deal with a cord, and then when the studs were too close together for my drill to drill a straight hole, i switched to my impact and drilled the hole straight, he then got pissed at me for using *my impact* and *my bit* to drill because impacts arent made for drilling. Dude couldnt stand shit being done any other way than his exact way, even though he was an idiot, but now had an apprentice to blame all his fuckups on, which slso happens to be the reason they got rid of me 😂

@frankdukes3499 3 года назад

I was told that same exact thing about battery tools were junk🤣🤣🤣

@Yukikazehalo 3 года назад

@@frankdukes3499 if I had a contractor come onto a project with only corded tools I'd ask them to leave...

@Being_Joe 3 года назад

@@frankdukes3499 probably were junk. I wonder at what point became good enough to replace corded tools.

@helloman3676 3 года назад

Battery nowadays is as strong as any corded tools. These boomers just can’t accept change. Sure, 10 years ago they were right but not anymore.

@worldwidewes8411 3 года назад

Apprentice = fall guy, lmao 😂 facts

@jamesc4343 4 года назад

Definitely a user of the Painters Tape!

@katjammer488 3 года назад

Great job with the explanations and very clear. Which Dewalt model of drill/driver/hammer are you using at the 8:18 mark of your video? Thank you for the video.

@kernst8927 9 месяцев назад

Great review! Thanks!

@starbravo672 3 года назад

Learned a lot man. Thanks.

@KT-iu2ov Год назад

Oh man, I have have never had a drill of any power tool really, but today I learned so much with you here. Thank you!

@jamespruitt6718 4 года назад

Ironically, with everything you did, the drill actually worked the best. Not to mention the extra tidbits at the end just added to its usefulness.

@jacobmarx1994 4 года назад

I learned a lot!!! Thanks!

@CambioJoe 2 года назад

I learned a lot, great video!

@cmos4286 3 года назад

great video I learned a little something today I love your tips on how to get things done when you break a screw off or you need a quick drill bit. Great video. And I did buy a 20 volt impact driver-drill. I will be upgrading the battery.

@crazyjoe91682 4 года назад

Love my 887. I use it more than my 996 but I’ll give my hammer drill some TLC from time to time.

@grandpadre8811 4 года назад

Good job, Nick!

@claudettegosselin7550 3 года назад

Great demo, learned a few tricks today.

@jonathanevans4686 4 года назад

Well done Nick very informative 👍

@rolandasmith1032 4 года назад

Thank you so much! Upgrading my battery vs buying a whole new drill. Thanks!

@lorenduran3347 2 года назад

Great Video man!!!!!

@thebackwoodsmechanic5029 4 года назад

I've used a lot of brands but I just keep stocking up on the black & yellow because it works

@ashv117 4 года назад

Awesome and thanks.

@bhribik21ify 4 года назад

Great video brother 👊👍. I like the idea of using the screw as a drill bit. I have done that before lol. That DeWalt 998 is a torque monster bro. Keep up the good work guys 👍

@VCGConstruction 4 года назад

Thank you for the support Brandon!

@robertarnobit5357 3 года назад

Thanks for explaining the difference. Now I know 👍

@AndriFahlevi 2 года назад

awesome!... thanks for review and awesome tips from indonesia!

@thomasday3294 4 года назад

Yo Nick thanks for the tips Bro! As always Stay Safe VCG BROS!

@VCGConstruction 4 года назад

👍🏻

@rayland8553 4 года назад

Your the best Nick, thx!

@awesomeness1113 3 года назад

I really enjoyed this video and visual demonstration. Definitely helpful. Not bad for a Dewalt guy

@evilqtip7098 3 года назад

nice video man 1!

@mattkaminski1900 4 года назад

Omg lol my dad did that old trick using a piece of tape to put on the spade bit awesome

@CoreyMTester 4 года назад

Thanks Nick, very informative as always. And hey Vince, hope you fella's have a great weekend. Gonna take a look at the Merch store today, looking forward to the signed hole saw cutout;) - a Tim the Tool man ar ar ar

@VCGConstruction 4 года назад

Thank you Corey! Hope you have a great weekend as well and thank you for the support!

@benjaminwilliams3568 3 года назад

What guy and girl watching wasn't thinking thought???

@miranmahmood2195 3 года назад

Thanks for this video

@brokernicksassi Год назад

Great video!

@danswelding9058 4 года назад

I’ve had to chuck up a few hex head screws myself when I was I need of a driver bit. #strugglecity 🤣 Cool tips and tricks bro!

@douglasbalderston724 3 года назад

Great help thanks 👌

@the_luminary 2 года назад

Great Tips at the end

@dsquareddo9283 3 года назад

Love the trick mate

@peggyraun-linde6336 4 года назад

Decision made. Thanks!

@mariofelix6182 3 года назад

Oh yeah..awesome video...do to this video I Will definitely buy an impact drill..thanks a million..

@Chuppakabras 3 года назад

Awesome video for beginners like me! 😎👍

@Captain_von_Tap 2 года назад

I am a potential incurable 'drillaholic', and I really enjoyed your enthusiastic delivery of this video! I have both of the same tools here in front of me, and did wonder about using the impact driver for drilling too! I think that we should all meet up for a massive drill symposium someday!

@BobMuir100 3 года назад

Great stuff, could the screw issue on the DeWalt be the massive battery that has so much torque? Try it with the smaller one.

@toolhunter8812 4 года назад

Nicr vid nick keep it up if i had to choose one id choose the impact all day

@williamreside5573 4 года назад

I like Nick. Sure he is passionate but he is "the man". I could listen to him all day.

@VCGConstruction 4 года назад

Thank you for the support William! You are the man!

@davidlouangprasert4728 Год назад

Thanks this video is very helpful

@christophercrawford2736 4 года назад

A few times my Dewalt hammer drill’s Chuck has been so tight that it’s locked up on my bit and I can’t loosed the Chuck by hand. I used a rubber strap wrench and easily got it open.

@alonsoglez5711 4 года назад

Oil

@christophercrawford2736 4 года назад

Alonso Glez tried that

@coolmanchiefs 3 года назад

What do mean oil

@bobs6129 3 года назад

When it does that take the bit out if you can and tap on the jaws of the chuck with a hammer just to push them back slightly and it'll open up

@charliebear242424 3 года назад

Great video! New to drills and learning to be a sparky. Great lay terms and language.

@somethingtrulyhorrifying 3 года назад

If that isn't the Australian version of an electrician then I don't know what is. The most Oz-esque thing I've read all week lol.

@Gollammeister 3 года назад

I just got a drill impact driver DeWalt 18v set today so looking forward to trying it out

@enginewatcher6291 4 года назад

Thanks Nick. You mentioned 4Ah battery v 1.5Ah and said always get the bigger battery. Ok I partly agree, but there is a big benefit to the smaller batteries too, they are dirt cheap on ebay because everyone wants bigger. I used to be a fit guy too but age and a bad heart have caught up with me, i just work around the house now, the smaller batteries are half the weight. If im on a bigger job I have some 4Ah or i just swap out the battery each time I have tea, if your battery runs flat your not drinking enough tea. You tell us how much easier the impact is weight wise, please give this a mention. I got an XRP drill and the 3 speed impact from dewalt, love them so I brought the 10.8v combi set for diy. Wow small and powerful for the little jobs. Half the weight. The wife says thank you, now i put tape around my tool, she dont like it deep😜 Great watching from the UK 🇬🇧 thanks guys.

@bobs6129 3 года назад

You'll get More voltage sag with a smaller capacity battery though but I agree I use 2 amp batteries for my radio, drywall gun when I'm running a drywall gun real light duty stuff but anything medium duty and up I use the four amp compacts or 6 amp

@jdreynolds29 4 года назад

Great video Nick 👍👊👌

@13chartier 4 года назад

I just bought the the dewalt flexvolt 20v. What was the first drill you used to cut through wood.

@billm7166 4 года назад

Thank you i still need the hammer drill i have cement walls and i appreciate the tricks with the screws i didnt know them i had many stripped screws i wish i knew that years ago

@billm7166 4 года назад

I didnt get the hammer drill i got a 12v Bosch impact driver and a n adapter that takes drill bits it works almost as good as a hammer drill just a little wobble in the chuck but with 100nm of torque there is plenty of power to do anything

@charlesviner1565 3 года назад

Thanks for the video from Davenport Iowa. LOL

@robertcalderon7762 4 года назад

Great job with the information.

@VCGConstruction 4 года назад

Thank you Robert!

@robertburgard8588 4 года назад

I do not like spade bits on an impact driver. Seems to be hard on the project and with every beat of hammer pieces go flying everywhere. The board splitting has happened to me more often with the impact then the drill when using spade bits.