Hello: I wanted to use the DIG B09D timer in Manual mode so that I could water beneath a tree that was missed by the sprinkler. My instruction manual says; "To instantly water push OFF. Push OFF to stop or it will run for the programmed time (if set). Default watering time is 5 minutes." Nothing happened when I pushed OFF. No water!?!?
It clicks but doesn't let water thru. Any help? I have a 100gall tank but don't want all water going out at one time. Want water to last 2 weeks(so I don't have to haul water each week. Thats why I bought the valve. Do they make a valve that works with low pressure? Nice looking unit/don't think the valve inside is moving.
Hey Sunil, we're sorry to hear about the issue. Please send us an email with your contact info to tech@digcorp.com so we can have one of our tech service representatives reach out and help troubleshoot the problem.
I have not been able to figure out how to adjust the days for other start times. If I move to start times 2-4, I can only set times for the days selected in start time 1. Am I missing something?
Hello R CM, unfortunately you cannot set different start times for different days. The program holds one schedule, and then allows you to set different start times for that one schedule.
Hello Kerry, A few things can cause this type of issue. The first is low pressure anything under around 20 psi. The second is debris stuck inside the valve causing reduced flow. The third is clogged screen washer on the inlet side of your BO9D timer. If you need further troubleshooting assistance please feel free to call our technical service/product support line at 1-800-322-9146.
This vedio is better than the first guy. This vedio shows more of the timer and what to do more than the person talking. I was confused about how to get to each day to set the time of day. The first vedio did not explain about setting 4 watering times per day if desired. This one did. Then you press the mode button to select the next day you want to set, then mode to start time again and set 1-4 times. And return to mode again to select the next day, mode to start, set time and so on..
Hey Moli, Steps on how to remove a start time: Press the Mode button until you reach the start time you would like to turn off. Then press the plus (+) button multiple times until the screen shows OFF. In-between 11:00 pm and 12:00 am the BO9D has an off setting. Hope this helps! Please let us know if you need anything else.