DIGITAL DC VOLT AMP METER 

Hello my friend. I am a retired person & I am very much interested in electronic. I watch youtube videos regarding electronic and electrical DIY, and I do purchase it from Amazon but now as Amazon charges for delivery, I stoped buying it from Amazon. Now I purchased from local shop, very cheap and I spent Rs 10.00 for bus to get it. Now I brought Voltmeter cum Amps meter from local with no gurantee. I watched more than 50 video's on this subject but all in vain. Nobody showing how to check with separate current and Amp. You made my day.👍🏻👍

I was able to do it by following your tutorial, thanks a lot!

Hello sir. I am an engineering student. I have watched almost all videos of your. They are interested for me and learnt a lot from your contents.currently i was trying tu upgrade firm ware of atmel atmega16u2 using avrdudes software by another arduino uno as arduinoisp..i I upgraded the firmware..but arudino board still not working and i found fusebits are set wrongly. They got changed somehow before upgradation. And i am trying to change them but it fails again and again. So sow one video of yours to know how upgrade firmware of that chip. I could not change the fuse bits. Kindly help if it is possible.

First time, I mistakenly tried to power the module by connecting the thick wires. I saw smoke coming and immediately disconnected. Then tried using as per your video, everything works. Do you think my module would be still broke?

Pls do, hack it to higher voltage reading :)

Hi Saravanan, I am a retired person and DIY is my pass time. Your video is very systematic and easy to understand. Congratulations for explaining so nicely.

Sir you are a great teacher, you can simplify any complicated wiring , I am retired newbie and just finished a power supply kit but was confused about connecting this V/A meter until I found your video, please continue with more videos like this. it was well explained, easy to understand and straight to the point.

How much Amps it's the display

Thanks Sir

Why are you making videos if you cant reply to people asking for help?

Nice

Sar mere pass Ampairmeter hai is ka Ampair Sahi Nahin show ho rahe is per 000 Nahin a Raha matlab 5.7 is Tera show ho raha hai kya folt ho sakta ha sir pls

Thanks you sir, very helpful

Digital v. Meter in Hindi translation midiya

Hello ! Can you help me in coding ? I want to control one single relay with sim800l message and also with the rfid ! Pls help me !!!!

How to convert 200v range

Sir, please ic details and code

excellent video sirji

Great video! Very informative and educating. Simple to understand 👌

Sir,I have a auto electrical test bench which wiring is perish,it has four types of load with 200a shunt.can you provide the internal wiring diagram of ELAK MK 2 AUTO ELECTRICAL TEST BENCH.

I read a warning of the shunt that must be powered up first before measuring or else the module can be damaged. How true is that?

Sir, why do we see a drop in voltage as the load is increased? I am using the same power source to measure current as well as voltage.

Does the specified circuit for charging a battery work with a solar panel? Your 12V battery = solar panel (?) Your "LOAD" = battery that should be charged (?) Solar panel 26 V / max. 150 W Thanks for a feedback.

Dear sir, I have such a volt & current meter with one connector only with thin red, black & yellow wire. Can you let me know how the connections are for the voltage & current measurement please ?

can it be used in a circuit that shows current and voltage - (minus)

❤ oooooo bhai nails

eyas iroip

No do sar

MAASHAALLAH, very well explained,. Keep doing the good work Brother!.

nice explanations thanks for the confusions to get the solution.

Nice

I have purchase the same meter, it does not have copper shunt current bypass on board, is that safe to measure till 10Amp?

Sir good explains houw can connect inverter battry to see Amp

I need this one for my e-wheeler..

I have some of those meters. They work good.

Good

My meter shows 99.9 amps but voltage reading is fine .. and nothing works on output

Polash

Hi! My meter look just yours but it didn’t come with the copper shunt that you pointed out. Do you think I should send it back or will it still work as well as yours?

Thank you so much man.. I have been trying to connect digital volt amp meter to my DIY amplifier, finally your video helped. Thank you so much❤

Can this setup be used to measure volt and amps from a mobile phone adapter???

i need to measure the output voltage and amp of 12 v 1A ac to dc adapter , how can i do that with this device

Can i use this meter to measure the current and voltage from a solar panel? I use the meter with the setup for the 2 power sources. Is this correct?

How do I connect it with a solar DC setup? I use a 30ah Lithium battery with solar charge controller.

Thanks. You just saved me the stress of connecting this. I just wanted a meter to measure voltage but ended up getting this without any details on the connection from the website

How to measure current in negative power supply like -5v

o angrej hindi mein bhi bol le

Well explained . Thanks Saravanan Coimbatore

very nice video sir.....i recd meter with out shunt.....is it available online? thanks

we can measure volt red black yellow wire. But my doubt ... Can we use this device to direct measure of transformer ampere without any other battery source load?

Hi i need your help on the Arduino, have sent you a message Please can you help. Thanks

Well explained thank you sir.

question sir. Can i use this set up to the output of the dc motor speed controler?

After a longtime I am seeing your presentation on Volt/Ampere meter's application in the you tube. I do remember you and your shop when I was working with Voltas at Coimbatore; I am a frequent visitor to buy components from your shop. Later on when I went to Bangalore I happened to see your online shopping; but I doubt about its progress. Anyway your video of this is very informative. What would be the price If I want to purchase? I need 3 nos and I am now at Ranipet enjoying my hobby. If you can tell me the price and the mode of payment I will send the same and also my address after you receive the payment.

hello saravanan i have a variable power supply from 0 to 30v under 3A can i use this volt meter amper meter to show me the value for example when i use 3 or i change to 20v ?

Great Video! Question, I am using a single power source for my meter but I want to be able to turn off the meter while leaving the line power on. Do I interrupt the yellow wire for a switch? Thanks

Excellent. Most of the videos shows single source measurement only.

Pl give link for purchase

Aoa sir Ager battery ke ampere measure krnay hoon to connections kiya hoon gay?

Thank you ... great explanation

Sir, How can I connect this v. amps digital meter with a battery charger. kindly guide me with a circuite.

Creative video, thanks for sharing :)

I am not getting same reading in general Multimeter (Mastech) and (0-100)V 10A Volt-Ammeter even closer values. Any help ?

hello Saravanan, i need to know how to use the Volt/Ammeter to measure the amp of my 3.7v battery. Thanks

Excellent video. Well done. So clear.

Very nice information sir🙏🙏🙏

What is that 16 pin IC?

best explanation 👍

Nice 👍🏻👍🏻 🇮🇳 Kuki 17|06|2022

Good information....

thank you sir💐🙏

Excellent explanation.

Brilliant! Best explanation available

Thank you

Supper sir

Thanks, it helps

Thank you sir

good job nice video

👎👎👎

Very well presented, you made it so easy to understand. Thank you.