at 4:00 if the pedal doesn't start tracking untill halfway, it needs to be calibrated. I had the same problem with mine. It's very simple to do and takes just a few seconds. It's described in one of the last pages of the manual: 1 Disconnect the power from the Whammy pedal. 2. Rock the expression pedal forward to the toe down position. 3. Press and hold the effect on/off footswitch while reconnecting the power. 4. Release the footswitch as soon as you see one of the preset LEDs begin flashing, which indicates that you are in pedal calibration mode. After the footswitch is released, the LED will continue flashing. • Note: If the footswitch is held too long, the LED will stop flashing and stay lit. If this happens, repeat the procedure starting back at Step 1. 5. Rock the expression pedal fully back (toe up) and then forward (toe down) two or more times. 6. Press the effect on/off footswitch again to exit the setup mode. •This completes the expression pedal calibration procedure.
I'm not here to critic his technique, i'm hear to hear the pedal. I don't care if he uses his foot, hand, head or balls to depress it as long as I can hear it
He would have to keep reaching down by his foot to change the settings you fool. This way he can demo it and show all the options without have to bend over to the ground to change it.
Could not agree more This song is a killer to practice with the Whammy I gave it a try btw ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-WNiV12Wl73A.html
you dont understand the wahmmy... its not dinamic if you just turn it on/off o just pull it down/up before and after playing... you killed the spirit of this pedal...