Disassemble crossbrace SMT205 

Thank you very much for the directions. I've used screw drivers to try to pry this thing apart and failed. Your directions made things so much easier.

WAY BETTER Than the directions that came with it. Your previous video of taking it apart was on SPOT. Thank you!!!!

Thanks 8yrs later. Hope you’re still with us. 🙂

Thank you, that's exactly what I needed to know. I'm turning this thing in to a vac hose reel.

Thank you. I'm reading the owner's manual for a SSB200B and this guide helped me understand what the crossbrace is. The guide simply says to "lift firmly on reel crossbrace to disengage snap" and I wasn't looking to break anything.

This guy knows exactly what he is talking about (but I only had 1 putty knife so I used a gravity knife as a substitute.) This worked exactly as described. I hope I can find the reassembly video.

Nice instructions. We have a brand new Suncast hose reel, needed to replace the outtube assembly due to it cross threading. It is just a little different in design, we were able to get it apart using just the screwdriver to release the 4 connection points. From there installation and reassembly went smoothly. Thanks! Hopefully it will not cross thread again!!

Thanks for sharing. Although ours is a different model, the instructions helped us.

Thank you the instructions on dis assembly were awesome thanks

Thanks! Worked flawlessly

i just did my suncast box. no need to flip it upside down - and thankfully so - since it is bolted down to an elevated carousel

Thanks buddy this really helps! Just couldn't figure it out

Thank you this was very helpful!

This video is useful for the Hampton Bay decorative hideaway hose reel Model PHW150HB.

Excellent

Should anyone need to replace O Rings on this model, I found them at the O Ring Store Part Number E70113 Minimum order of 17, but they are .10 ech, fixed my leak and only had to disconnect the feeder hose connector at the box- See 2:35 mark in the video to access the O rings.

YOU need too tell people to Hit All Four Sq. Spots or it doesn't come apart!!!!

Great video- I hate to thro away my Suncast that needs knew O rings. Anybody know where to get new o rings for this model? Or what size needed where the feeder hose connects?

Can it be reassembled with the hose & crank handle on opposite sides? Thanks in advance for a response!

What about the handle? Mine doesn’t pop right off like that. I can’t remove it.

What size are those 2 o rings?

I'll buy a new one for $25 bucks..