Dishwasher not heating or Drying faulty heater element or thermostat

Подписаться 141 тыс.

Просмотров 193 тыс.

50% 1

Get your appliance fixed faster! Click the link below to browse our supplier's huge selection of appliance parts and support the channel at the same time! (repairpartstea...)
For all dishwasher elements rover.ebay.com/...
www.how-to-rep...
If your Dishwasher water not heating up during the washing cycle!
Then you might have a heating fault or thermostat failure the dishwasher cycle settings vary from 30 degrees Celsius to 65. However, the water is staying cold through the whole cycle. Grease and grime are starting to build up and food-based products are not cleaning from dishes properly.
This is normally a problem with the heater system or thermostats see our video to help you on this.
Please remember to subscribe to our channel
www.youtube.co...
Remember to Shop with www.how-to-repair.com and it would help us by posting the video or the website on your timeline.
This helps us a lot and if we really helped you can always buy us a beer how-to-repair.c...
Please remember to mark us to your favourites also I would be grateful if you would subscribe to our channels social media as this really helps my site and keeps us going.
RU-vid. / apart4u
Facebook. / how.to.repair.appliances

Опубликовано:

5 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 69

@daddyfixit5188 4 года назад

I think your vids are great already fixed my dryer because of you and now I’m on to my dishwasher which my wife put washing up liquid in and upset something 👍👍👍👍👍👍thank you. You should get a medal for saving the environment just think how many machines are saved from disposal because of you. Thousands and increasing by the day 😀👍

@pkumar5411 2 года назад

Great explanation and than you. One thing I would add is that when you got the new replacement part it would have been great to use the multimeter on the new part and show and confirm the circuit to be working before replacing. Thanks again.

@How-to-repair 2 года назад

Thanks please remember to subscribe as that's is was keeps this channel going. Thanks 👍

@philippe165 3 года назад

Now this guy knows what is talking about! Nice to see, wish he could fix my dishwasher

@mrdog3920 4 года назад

Awesome demonstration. Helped me no end to locate and test my heating element. Unfortunately my heating element is good so the search for the problem continues. Thanks for posting the video!

@pinkeycivic 4 года назад

This video helped me fix our BEKO that was no longer heating. A quick £16 fix. Thank you very much.

@karljones9832 4 года назад

Thanks, bought the part from your ebay shop, all working. I messed up the legs as didnt realise you can lower them from the front with a screw driver. Thanks very much

@Anonymous-zi5wr Год назад

I was reading and found this online. "Bleach and bleach-containing cleaners are not recommended, especially if the dishwasher has a stainless steel interior." Why shouldn't you use bleach in dishwashers?

@How-to-repair Год назад

The only thing I can think off is the salt container area. please remember to subscribe as that's is was keeps this channel going. Thanks 👍

@MrGeoffreoso 4 года назад

Bril. Followed the procedure no problems. A bit fiddley at times. The only annoying thing was when I had removed the faulty heater and checked it with the meter there was continuity. I'm absolutely sure it was open circuit in the dishwasher because I had used the meter and there was no heating during the wash cycle. Next time there are electrical contacts in a suspect device I shall follow the saying "if in doubt give it a clout" first.

@shannongibson4591 Год назад

Thank you for this video. I've removed my heating element as instructed and tested (the element itself appears to have continuity), but the bit in your video i wasn't quite able to follow was where (10:37 onwards) where you diagnose one of the thermostats going open circuit. Where you show us using the spare heater going across the 2 terminals. I cant quite see the points on the element where i am meant to be testing this

@marcio_de_oliveira 2 года назад

Many thanks on your video explanation here, just repaired my one with £14.95! Cheers for that!

@How-to-repair 2 года назад

Glad it helped Thank you For leaving a comment this is for you ru-vid.come432SAb2g08 please remember to subscribe as that's is what keeps this channel going. Thanks 👍

@claeslindqvist8996 3 года назад

Brilliant! This clip saved my day/week/month :-) How did we survive pre RU-vid?

@btnled357 4 года назад

Just had my 18 year machine stop heating while in the wash cycle yet seemed to heat just about enough dry everything. .... nothing wrong with it except the filter and little float needed a good clean... Check the obvious before pulling the machine apart

@1612ydraw 2 года назад

This man is a pro. He don't play

@colrunswild4adventure781 10 месяцев назад

Hi, great informative video. Why would a dishwasher overheat? the error code is F7 and in the dishwasher manual, it's saying F7 is overheating. the machine is a bush dishwasher BFSSAE12W

@Mollygirl91 6 месяцев назад

Hi. Can you tell me how to test if the turbidity sensor is good or bad. My AEG dishwasher is not heating. I assumed it was the heater but it is testing fine. I assume it is not the PC board as the display is fine. Research suggests the turbidity sensor. I am in Australia. Thanks for your informative videos. Greg

@rscelectrical7091 6 лет назад

Hi Paul: Have you seen the Slip joint, Corbin pliers from Mac tools ?. I find them much easier to use. Andy

@hectorrondon8150 4 года назад

You are the best! Hats off.

@kissingfrogs 6 лет назад

I love your scientific approach. Awesome

@jamescodling8641 2 года назад

Very clear. Excellent work

@How-to-repair 2 года назад

Glad it was helpful! Thank you for leaving a comment this is for you ru-vid.come432SAb2g08 please remember to subscribe as that's is what keeps this channel going. Thanks 👍

@bulentsengun2620 2 года назад

Hi, my dishwasher is washing and draining but at the end bringing tap light on and not heating water as well. What can be reason. We changed drain pump and inlet pump 2 month ago.

@How-to-repair 2 года назад

I would check the heating system. Thanks please remember to subscribe as that's is was keeps this channel going. Thanks 👍

@jblack57 4 года назад

I can see he is pure pro , nice vid:)

@usmanhashmi6781 Год назад

Realy it's very knowledgeable video thanks sir

@stephenhalliwell4720 6 лет назад

Thanks for the great video. I would like to have seen a close up of wear you were measuring the resistance.

@rscelectrical7091 6 лет назад

Hi Stephen: Really the only test you need to do is across the 2 pins on the white connector. If your meter shows open circuit or high resistance, then the heater unit is faulty and needs replacing.

@doubleoh9814 5 лет назад

RSC Electrical hi, but can there be a case of a good heating element but a faulty thermostat? My dishwasher won't heat so I just unplugged the electrical cables from the heating element and checked the resistance and got around 26ohms for a 2000W element. The circuit board looks OK (no signs of arcing or black marks) so could it be a faulty thermostat? I don't know how to measure that

@Blameberg Год назад

Warning. These Electrolux dishwashers have now mostly integrated heater inside inverter circuit pump, and if its not heating, problem isnt mostly in the heater, but because no voltage is coming to it from the main control board. (Not the display board on the panel) So check the relay with 9V battery if its contacts are switching but even here isnt mostly problem.

@How-to-repair Год назад

Great advice to the people that read this. Hope you had a good New Year. Please remember to subscribe to the channel as that helps us glad we could help you @LordCarlSagan this is for you ru-vid.come432SAb2g08 please remember to subscribe as that's what keeps this channel going. Thanks 👍

@dvsfreek Год назад

1800w should have 32 ohms resistance. however combined im getting 16 but 1 of the heater thermostats has browning like yours. , meaning ive problems correct?. in effect circuit is partially open?.

@jafaribori5428 Год назад

Thank you so much, my engineer

@Philsy1845 4 года назад

Not as easy as these guys make it look!

@How-to-repair 4 года назад

Iam Glad we could help you. If you ever need help please use our site for 24 hour response www.how-to-repair.com/help/contact-us/ If have a question please use our site for 24 hour response www.how-to-repair.com/help/contact-us/ Please remember to subscribe to our channel ru-vid.com Remember to Shop with www.how-to-repair.com and it would help us by posting the video or website on your timeline. This helps us a lot and if we really helped you can always buy us a beer how-to-repair.com/help/buy-paul-a-beer/ Please remember to mark us to your favourites also I would be grateful if you would subscribe to our channels social media as this really helps my site and keeps us going. RU-vid. ru-vid.com Facebook. facebook.com/how.to.repair.appliances

@dawidos117 2 года назад

Thank you for your video, sir!

@How-to-repair 2 года назад

Thanks please remember to subscribe as that's is was keeps this channel going. Thanks 👍

@buddysinsight9834 4 года назад

Hello mate do you cover the oxford area I think my heating element on my AEG dishwasher has gone

@mixmastergeneral6430 7 месяцев назад

I changed the element, worked For 2 washing cycles and is Now cold again..

@farmtracks1 5 лет назад

Fantastic video ! Thanks for such a clear explanation!

@Anton008 6 месяцев назад

I have Beko dishwasher and I can see that dishwasher is drawing 2000W (flow heater), but only for 1-2min in each cycle. I tried replacing NTC at the bottom, but that did not solve problem. Any idea/suggestion?

@nicolaedutceac1747 3 года назад

excelent pressentation!!!!!!!!!!!!!!!!

@tsvina 5 лет назад

It's easier taking the back plate off and rear part of the right side

@robakhh 5 лет назад

what could cause dishwasher gets to hot (door gets hot )? is still could be thermostat or turbidity sensor.

@nicholasradwell541 3 месяца назад

Great video 👌

@How-to-repair 3 месяца назад

Glad you enjoyed @nicholasradwell541 please remember to subscribe to our channel as that really helps us ru-vid.come432SAb2g08 Thanks, Paul 👍

@nicholasradwell541 3 месяца назад

@How-to-repair hey Paul how do I order parts from you?

@bohumilbarva9671 2 года назад

great video

@How-to-repair 2 года назад

Really glad it helped you fix your problem Thank you for leaving a comment this is for you ru-vid.come432SAb2g08 please remember to subscribe as that's is what keeps this channel going. Thanks 👍

@onebaddayaway 7 месяцев назад

Great video, Thanks,

@sueconradie9290 4 года назад

Great video, thank you!

@How-to-repair 4 года назад

Can you do us a favour and please share this video on your timeline Facebook twitter etc . This will help other people who can’t get engineers out to help them. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-rFyGAHVFUW8.html&t facebook.com/how.to.repair.appliances/ Stay safe

@jjjoooojjj 6 лет назад

Thank you so much for this video!

@khaledabouzeid5888 4 года назад

My dishwasher drain do not filling with water , it got in and out immediately and after long time it report alarm

@hearliam 6 лет назад

So on my multimeter if is says 0.00 v a/c does that mean the heating element is dead

@halmatosman6977 6 лет назад

Hi haw ary you dishwashir broblam DLC DWA3320 error F5 thanks

@Ppp-kk6hw 4 года назад

My washer dryer keeps tripping and blows cold air out and only 6months old from Currys. 3 times in 5month so far

@How-to-repair 4 года назад

Try getting hold of one of our engineers free of charge on facebook, we will work through one to one diagnostics and repair of your machine :) go to our facebook page to book in with paul facebook.com/how.to.repair.appliances/

@bretwjackson 6 лет назад

So I have a GE dishwasher and they keep telling me that I don't have a high limit thermostat and I do and I can see it myself so I'm wondering if I can put a generic thermostat in place it's a 180-degree thermostat?

@How-to-repair 6 лет назад

I cannot be 100% on this but I would not recommend it as you do not know what the limit temperature was designed at. please use site when you have a question please use our site for 24 hour response www.how-to-repair.com/help/contact-us/ Iam Glad we could help you Please remember to subscribe to our channel ru-vid.com Remember to Shop with www.how-to-repair.com and it would help us by posting the video or website on your timeline. This helps us a lot and if we really helped you can always buy us a beer how-to-repair.com/help/buy-paul-a-beer/

@nbergue 5 лет назад

Hi, could anyone help ??? I have a dishwasher LBL12A (BRAZIL) but it is W10142826a. She is not warming up. she ends the normal cycle. I tested the resistance is ok. when i run the diagnostics (normal / heated dry (3x) during the process it heats up. what could it be? please !!!!

@How-to-repair 4 года назад

sorry for delay when you have a technical question please use our site for 24 hour response www.how-to-repair.com/help/contact-us/ Iam Glad we could help you. If you ever need help please use our site for 24 hour response www.how-to-repair.com/help/contact-us/ If have a question please use our site for 24 hour response www.how-to-repair.com/help/contact-us/ Please remember to subscribe to our channel ru-vid.com Remember to Shop with www.how-to-repair.com and it would help us by posting the video or website on your timeline. This helps us a lot and if we really helped you can always buy us a beer how-to-repair.com/help/buy-paul-a-beer/ Please remember to mark us to your favourites also I would be grateful if you would subscribe to our channels social media as this really helps my site and keeps us going. RU-vid. ru-vid.com Facebook. facebook.com/how.to.repair.appliances

@miarazib917 3 года назад

👍👍👍👍

@fernandomatias5514 Год назад

🍀❤️🇵🇹

@nailsnails2090 Год назад

Install dishwasher

@How-to-repair Год назад

I will get round to doing one of these at some point @nailsnails2090 please remember to subscribe to our channel as that really helps us ru-vid.come432SAb2g08 Thanks, Paul 👍