DIY $20 side splitter!

Подписаться 15 тыс.

Просмотров 273 тыс.

50% 1

BUY YOUR 5D GLOSS CARBON FIBER WRAP HERE!
goo.gl/9dHTzr
Made a DIY side splitter from stuff that i bought at Lowe's! Only cost me $20 and it looks so custom and looks good!
Subscribe to my channel
- ru-vid.com?su...
Buy my exclusive merch
- www.thejmedia.com
Follow me on Instagram
- @jus_tyn / jus_tyn
- @thejmedia / thejmedia
Like my Facebook page
- / thejmedia
#diy #howto #sidesplitters

Опубликовано:

4 май 2017

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 380

@TheJMedia 5 лет назад

Quick update to everyone! It has been almost 2 years and the side splitter is still good on my car. Never had problems in rain or coming off when driving.

@johnnycashh7148 4 года назад

Where do you order the wrap from?

@lowlifesrt4828 2 года назад

What’s carbon wrap is that 3D or 5D

@TheJMedia 2 года назад

5d gloss carbon fiber wrap

@lowlifesrt4828 2 года назад

Thanks bro looks bad ass 🤙🏼

@TeddyGyro 5 лет назад

I don't see why people are hating on this. This looks better than some $200 splitters out there. Definitely gonna do this to my car later on

@TheJMedia 5 лет назад

Thanks man I appreciate it! I've had it on the car for over a year and still holding strong!

@nelsoncarino7218 5 лет назад

The J Media Can U Tell Me What Kind Of Material Did U Used Please!!!

@franchisefred4066 2 года назад

Cause it looks cheesy 😂

@omarramos859 4 года назад

Out of all the DIY vids this one is a winner. Can't wait for good weather to work outside and get this done! Thanks!

@humblefam6462 6 лет назад

Regardless of what any of us says, this is an affordable and simple DIY for those that want that look without spending a few hundred bucks on real splitters. Seems less labor-intensive than most other DIY ideas too. If you're happy with the results, then good for you. They look clean imho and it seems you used the right material so as to avoid water/moisture damage. Nice work!

@bondoman2k 5 лет назад

For the record..they sell these same base moldings at most Home Depots too (I did find one here that doesn't carry them). Lots of guys say to use abs..ok, maybe so but those take longer, and are actually even more work. And trust me, I'm an ASE certied collision tech and I can guarantee you being these are made of polystyrene, they are just as strong as the rocker moldings themselves. Now if I was doing a 'legitimate' front splitter and want a lighter version of side splitters, abs sheet cut to fit would be the way to go. BUT this is supposed to be a low buck answer than can be done fairly quickly, and it IS! Great job btw. Gonna start on mine tomorrow (for a Mini Cooper Clubman wagon). ;)

@dsmchick935 5 лет назад

I like that you show the receipt now I know exactly what it is

@ChapaChapa13 7 лет назад

Nice DYI bro... Definitely doing this today! heading to lowes as soon as I leave work

@TheJMedia 7 лет назад

JonyxSD Nice man, good luck!

@csmers3743 4 года назад

Definetley my kind of DIY.. cheap and fun!!! Thanks for the idea, yours came out Great!!👍🏽

@TheJMedia 4 года назад

Sure thing! I'm glad you like the diy mod! It has been over 3 years and I still have it on my car and holds on great!

@GurillamadmanStories 3 года назад

The J Media you’re the goat I’m definitely saving my money and doing this to my m3

@TheJMedia 3 года назад

No problem! It looks great and an easy mod to do

@johnnycashh7148 4 года назад

Prob the best DIY ones I've seen yet. Thanks for sharing!

@TheJMedia 4 года назад

Thank you so much! I really appreciate it!

@williamfullman2639 6 лет назад

Nothing like diy perfection it looks good man

@albatrosrexha1593 5 лет назад

that looks so sick, great idea bro, def the nicest home made side skirt I've seen on youtube

@Adam1llion 5 лет назад

I didn't think this was gonna be a good one but I stayed till the end and I was impressed. Might do this to my ride!

@TheJMedia 5 лет назад

Thanks man I appreciate it! Yea it has been on my car for over two years now and still holding on good.

@SpencerHogg 7 лет назад

This is super awesome dude, cool DIY custom project and how you made this yourself. Respect!!!

@TheJMedia 7 лет назад

NinjaxBart Thanks man! Yea it's pretty simple and I would encourage anyone to try it!

@josephribot2261 5 лет назад

Love the ingenuity. Good stuff bro. You Rock.

@TheJMedia 5 лет назад

Thank you man I appreciate it! Yeah it is always fun to think of and try diy stuff!

@zeebracove2992 5 лет назад

nice work bro, looks clean! What did you spray onto the door jam before wrapping it?

@szabolcskatai7659 4 года назад

Awsome video! Just bought some pvc window trims one side is rounded looks like a perfect fit. Just need to cut and wrap! 👍

@TheJMedia 4 года назад

That's awesome! Good luck with your project! I've had mine on the car for 3 years and still holding on good

@stanleyspeedway3478 6 лет назад

I love this kind of DIY idea! Fun easy projects!

@TheJMedia 6 лет назад

Stanley Speedway Yes I agree! Glad you like the video and found it useful!

@stanleyspeedway3478 6 лет назад

The J Media---- hell yeah bro! Just finished my rear splitter and im using weather stripping for my front lip trim.

@TheJMedia 6 лет назад

Stanley Speedway That's awesome! It's all about that custom fab work and diy!

@swatisquantum 4 года назад

That looks like those expensive JDM pieces from Japan. You’re creative bro!

@roelmahilum1877 4 года назад

Nicely done bro carbon fiber wrap looks great!

@TheJMedia 4 года назад

Thank you I appreciate it! Cheap and simple diy that looks great!

@mauriciopinon3846 5 лет назад

i bet the carbon fiber wrap helps keep it safe from rain/water even if it was wood (which its not) ! nice job!! will definitely try this out on my jetta

@TheJMedia 5 лет назад

Thanks man it sure does! I still have it on my car and it has been over a year and still looks great!

@adamwilder1407 6 лет назад

Hey! I was wondering if that wing is stock or aftermarket? And if so, where it came from. Thank you very much!

@MumbleVlogs 6 лет назад

May actually consider this down the road for my G37s

@nonameisthename138 4 года назад

Lol, that was pretty creative. 👍👏👏👏 I was wondering if someone has done this or not.... great job

@TheJMedia 4 года назад

Thank you I appreciate it! Yes I wanted to do a cheap and good diy. Had it on the car for about 3 years and still hold on good

@iivv_nn 5 лет назад

What is that you used? I can't find it. Like door molding? Anyway, looks cool.

@jdmchickkustomz9417 3 месяца назад

Nice job guys!! 💯

@TheJMedia 3 месяца назад

Thank you I appreciate it!

@hamdijabajric556 5 лет назад

That’s pretty dope !

@H2kPat0 7 лет назад

Dude thanks for this video! Might gonna do it aswell!

@TheJMedia 7 лет назад

PATO Sure thing man, good luck with the project!

@raydelfa1125 5 лет назад

Great job !

@thefoatmedia 5 лет назад

Getting very creative keep up the work!

@TheJMedia 5 лет назад

Thanks man i appreciate it!

@dsmchick935 5 лет назад

Wow so awesome! Im gonna make fir my eclipse! Thanks!

@TheJMedia 5 лет назад

Sure thing man! Glad you found the video helpful!

@MoistBiscotti 6 лет назад

Looks good man! i like the idea alot!

@TheJMedia 6 лет назад

Thanks man, i appreciate it! Nice and simple install!

@magik1ful 5 лет назад

Nice job!!

@TheJMedia 5 лет назад

Thanks man!

@D.Sanchez1 6 лет назад

That looks pretty good and it was cheap so great ingenuity man

@TheJMedia 6 лет назад

David Sanchez Thanks man I appreciate it!

@JackieW296 6 лет назад

Do you drill it onto the car if so where on the car do you drill? I dont want to put holes on the wrong place on my car.

@badmofo350 7 лет назад

good job man they look good!

@TheJMedia 7 лет назад

DrFuNK Thanks man, I appreciate it! 🙌

@kvpharmD 6 лет назад

Looks clean! Might do this on my car soon lol

@TheJMedia 6 лет назад

Khoa Vuong Thanks man! Yea definitely, it's a pretty cheap mod that makes the car look bet in my opinion!

@hondaonbkt 6 лет назад

Thank God I found this was about to order top one side splitter for my 9th gen

@TheJMedia 6 лет назад

Honda on Bkt Yea man try it out! Cheap diy that looks good!

@hondaonbkt 6 лет назад

The J Media I am tomorrow thanks for the great diy

@JorgeGonzalez-lk6yl 6 лет назад

Clean! Now I know what to get for my e36.

@TheJMedia 6 лет назад

Thank you! Good luck with your project!

@Slamscents 7 лет назад

Super smart , love it

@TheJMedia 7 лет назад

Slam Sab Thanks man, I appreciate it! Love the simple and cheap diy stuff!

@hamzafredj7743 4 года назад

Looks wonderful 👌👌

@TheJMedia 4 года назад

Thank you I appreciate it! Easy to do and looks good

@johnchavez5375 4 года назад

What is the material ... ??? Is it wood ... ?? Or so they use that material that you made the side skirt ...?

@johnchavez5375 4 года назад

????

@sealevelcain9512 7 лет назад

wow thats soo cool you made it yourself!

@TheJMedia 7 лет назад

Sea Level Cain Yea it's not too difficult! I would encourage anyone to try it out!

@dontworry7113 6 лет назад

Good shit man looks good might do the same with ABS plastic

@TheJMedia 6 лет назад

Jay Genesis Thanks man! Yea abs plastic would be good too. Good luck with your project!

@ejayasaula 4 года назад

What does it call?

@mkonji8522 4 года назад

"it's not wood so it shouldn't rust"

@TheJMedia 4 года назад

Oops good catch! Didn't mean to say that 😂

@mkonji8522 4 года назад

@@TheJMedia lol to be fair the statement isn't incorrect.

@jsbstation 6 лет назад

Good job, Good idea 👍

@TheJMedia 6 лет назад

jsbstation Thanks man, I appreciate it!

@NHSSHINOBI 5 лет назад

I'm very impressed, will definitely be doing this to my lancer, How has it held up?

@TheJMedia 5 лет назад

Thanks man! It has held up good! I've had it on the car now for over a year and no problems driving in the rain

@kenbklynbklyn5406 6 лет назад

Nice wheels!

@ernestoduran357 6 лет назад

Dope! I'll try it. and show everyone my outcome after it's done I might have a video.

@TheJMedia 6 лет назад

Ernesto Duran For sure man! Definitely recommend doing it and hope it turns out good for you!

@highdeserturbanhomestead Год назад

Thanks for the vid. You probably already answered this, but curious how you finished the ends? Did you wrap the ends as well or painted? This would be the area I'd assume could come undone over time. LMK.

@TheJMedia Год назад

You're welcome! Yes I had the ends spray painted black. Ends of the wrap actually stayed on for many years

@tonydavila2606 5 лет назад

Try it with abs plastic sheets. They sell them at home depo. A lot stronger. Some people use them for custom front splitters and rear splitters for time attack cars. Since the variety of cars are so big its hard to find actual splitters for not so aftermarket heavy cars. a customer of mine, as a 2012 base model Ford Focus, 5-speed that he boosted and build for time attack and you can find a lot of aftermarket parts for the St, but nothing really for the four-door sedan 5 speed,. Custom made him a splitter, diffuser and side skirts.

@TheJMedia 5 лет назад

Thanks for the info man! Great to know that you can find materials at Home Depot to custom fab stuff!

@bigboycervantes5240 5 лет назад

How of call tony davila . Of plastic sheets .donde las consigo.

@TheSetik01 7 лет назад

Bro came it good u just gave me this idea to do to my g35 good stuff 👍🏼

@TheJMedia 7 лет назад

Daniel Rodriguez I'm glad you liked the diy video! Good luck with your project!

@skizzo8585 5 лет назад

actually what are these plates? I want to buy them too..

@walterlvera1978 5 лет назад

It looks pretty good I was trying to do the same long time ago I couldn't find abs plastic in home depot

@TheJMedia 5 лет назад

Thank you! Yea I did it 2 years ago and it is still holding on good on my car till today

@walterlvera1978 5 лет назад

@@TheJMedia wow that's really good what material u use

@j.tamazingcichlidman5033 6 лет назад

Looks good man, can't believe what they charge for side skirt extension....

@dsmchick935 5 лет назад

OMG I want to see more of your cars those are pretty. I work on my own Cars 2 I have a 99 Mitsubishi Eclipse Spyder she's a project

@TheJMedia 5 лет назад

Thank you! Yea if you like my content make sure to subscribe as I have new videos on the channel every Wednesday, Friday, and Sunday! Good luck with your project cars!

@SubieShakedown 7 лет назад

This is such an awesome diy!! Def going to be doing this! Where did you get your cf wrap? Subscribed!!

@TheJMedia 7 лет назад

Subie Shakedown Thanks man I appreciate it! You can get carbon fiber vinyl at vvivid vinyls or 3m. Stay tuned for more diys!

@1440PGamingContent 7 лет назад

You should do your headlights, and possibly a diy for cancards

@TheJMedia 7 лет назад

ayedylan Yea I actually just bought new headlights and install video will be on the channel soon! As for my canards, I have them on the car

@bj_from_the478 4 года назад

Great job sir

@TheJMedia 4 года назад

Thank you!

@yungjavfromaz 6 лет назад

What kinda Plastic is that stuff? I was just at home Depot today and could only find wood ones

@420CEO 7 лет назад

Very clever.

@timothystrunk7323 7 лет назад

Cool man good idea. I hate when people say oh thats rice. Its like dude your rice. Good job

@TheJMedia 7 лет назад

Timothy Strunk Thanks man I appreciate it!

@effewegugal3382 6 лет назад

I agree for the most part. I think diy accessories are the way to go if you have any skill at all. Just look at any Ring Brothers vehicle. They are all complete redesigns of the original then custom built, so what's the difference? There isn't one. Where I disagree is on the carbon fiber wrap. I think carbon fiber looks great. I think carbon fiber wrap is like wearing a Harley Davidson bandana and vest while you ride your scooter around town. The whole point of carbon fiber is that it's light and incredibly strong for it's weight. Using carbon fiber parts on your vehicle makes a statement that you are trying to achieve the best possible performance from your car, the way it looks is a good side benefit of the investment. These splitters would have still looked awesome in semigloss black. Leave the carbon fiber look for the people that are willing to pay for it. These splitters are great, carbon fiber wrap...RICE.

@lady_cee_cee_v4096 5 лет назад

Looks so good 👌🏿👌🏿

@TheJMedia 5 лет назад

Yeah simple and cheap diy mod!

@araujosilva603 5 лет назад

What is the name of this material you used to make your Splitter

@9211coco 7 лет назад

What was the exact thing you use from lowes?

@Hansspeilm 5 лет назад

Very creative. How has it and the wrap held up to rocks and weather since you put it on?

@TheJMedia 5 лет назад

Thank you! It has held on great. Been on the car for 2 years and stayed on

@jay370z5 5 лет назад

Nice and clean! Save that money....sonny lol! Is that 5D CF wrap? Looks good, might go that cf wrap route for my hood and spend 100 bucks instead of getting one for 800+ ! I actually have the same side vicrez splitters as Marco 👍🏽

@seyeriv2804 5 лет назад

Evo lookin sharp

@raffy1us 7 лет назад

Hey man, thx for the vid.

@lifebeingpoor1442 5 лет назад

Looks awesome bro! But why didn’t you cut it before wrapping? And did you end up painting the edges black? Thanks

@TheJMedia 5 лет назад

Thank you I appreciate it! Yea I should have cut it first before wrapping haha. Either way works good! As for painting the edges black, I did it so that you wouldn't be able to see the white material from the sides after you mount them on the car

@miguelortiz2566 6 лет назад

This video is awesome and already planning to do this on my yaris this weekend, however here in the philippines thing like the material you use are not common, so would you happened to know what those trims are called, so I can ask the right question when I go to home depot this weekend, thanks and more power to you.

@TheJMedia 6 лет назад

Miguel Ortiz Thanks man! I'm not sure what the name of the exact material is called but it's used for window trims

@tarek3702 4 года назад

Do you guys have a diy window vents for rear windows with speed holes?

@TheJMedia 4 года назад

That was rear window vents. No diy drilling was needed. Just need to put down the rear glass and it fits

@rafa1503 6 лет назад

Hhahah sweet i made some like these for my miata last year, people never knew they were diy i wrapped mine aswell.

@TheJMedia 6 лет назад

Ralphy Dank Sounds good man! Yea wrapping it makes it look much better!

@warlocquegander3080 6 лет назад

very creative!

@TheJMedia 6 лет назад

warlocque gander Thanks man! Cheap diy mods are my favorite!

@DazerB94 7 лет назад

Nice vid fella !! Doing this to my car but as I live in the UK it's hard to find plastic in the correct style etc...everything is wood on this side of the pond 😂😂

@TheJMedia 7 лет назад

DarrellQPR Thanks man! Hahaha yea if you can find like a diy store or something they might have some materials! Good luck with the project man

@santisimarisingtv 5 лет назад

2 thumbs up coming from a guy . . . . That hand custom build anything and everything frm sracth Good job.👍👍

@TheJMedia 5 лет назад

Thanks man i appreciate it! Always good to have custom mods!

@seanoquendo56 7 лет назад

This is dope bro great idea

@TheJMedia 7 лет назад

Sean Oquendo Thanks man! Yea I love simple and cheap diy mods that makes the car look good!

@seanoquendo56 7 лет назад

Being i cant find anything for my honda fit to make it look aggressive i stumbled onto this video nice i like the whole carbon fiber look good shit bro thanks for the motivation i subscribed

@TheJMedia 7 лет назад

Sean Oquendo Yea sure thing man! Custom made stuff are always the best and stands out!

@bigboycervantes5240 5 лет назад

Ok what kind of material is that bro how u call it.

@JoshTechgamer 6 лет назад

that's funny looks cool would never know lowes lol

@anthony_t.v2179 4 года назад

Why didn’t you use a fiber glass panel??

@bootyman234 7 лет назад

Hell yeah bro, a man's gotta play! =)

@TheJMedia 7 лет назад

Anthony Wayne Yea man, diy stuff are always fun!

@bootyman234 7 лет назад

I think it looks great. That was creative and shows ingenuity! Hats off to you bro. You should check out my mutation when you get a chance. lol

@TheJMedia 7 лет назад

Anthony Wayne Thanks man! Yea good luck with your project. Hopefully all goes well!

@bootyman234 7 лет назад

Bro, I'm just havin fun as well.

@isabelle.c011 6 лет назад

Wow looks hella good lol

@TheJMedia 6 лет назад

Nancy Perrault Thank you! I've had it on for a year and no problems!

@chuckyoo 6 лет назад

You just saved me a ton of money

@TheJMedia 6 лет назад

chuckyoo That's good to hear man! I felt that many places sold side splitters for way too expensive so I decided to diy!

@jrmaster5380 5 лет назад

Very clever make me some for my f sport

@TheJMedia 5 лет назад

Good luck man! Looks good and it lasts long too. I still have it on my car after 2 years

@MaksUkr 7 лет назад

nice job! good luck to u

@TheJMedia 7 лет назад

Максим Соловей Thanks man! Appreciate the support!

@BlackFlames567 7 лет назад

like your personality. subbed

@TheJMedia 7 лет назад

BlackFlames567 Thanks man! I appreciate your kind words and support! More videos 3 times a week so stay tuned!

@TheRomeo1580 6 лет назад

Bro looks good F the haters!

@TheJMedia 6 лет назад

Rick Alvarez Thanks man I appreciate it!

@auroracampos1162 5 лет назад

What size is of pvc panel

@raymundorodriguez7535 7 лет назад

Where did you get the rear window wing/wind diffuser sorry forgot what it's called

@maux4342 7 лет назад

Brown Sugar gt wing spoiler?

@paulcz5592 2 года назад

What do I buy? Like u know the name of wood or what ever it is u bought?

@TheJMedia 2 года назад

Not sure the exact name of it but if you ask a home Depot associate to show you to the window sill section, you can use that trim piece to make it.

@miket9724 6 лет назад

"it's not wood so it won't rust" 😂

@TheJMedia 6 лет назад

Michael Thomas Whoops you got me good there 😂 I meant not rot and disintegrate

@Tomazooke 6 лет назад

That tech screw... come oooon

@taurianharris5130 5 лет назад

Deff going to do this to my car since they dont make side skirts for my car

@TheJMedia 5 лет назад

Yea it's cheap and easy to do!

@Mdonfor 2 года назад

Great content

@TheJMedia 2 года назад

Thanks man I appreciate it!

@poopbug6346 5 лет назад

Good stuff we as human we are creators nice job

@TheJMedia 5 лет назад

Thank you i appreciate it!

@bernardmarloquit5391 2 года назад

May I know the exact materials you have used

@TheJMedia 2 года назад

Not sure of the name of material but it's used for the house window/door sills. It looks and feels like some sort of plastic and wood mix

@nimai420 7 лет назад

FYI your back seats go down

@TheJMedia 7 лет назад

nimai mederos Good to know! Never tried it before!

@shurikengaming1191 6 лет назад

Haha too funny you ever go back there?

@danielhorne6175 7 лет назад

Let the haters hate, it's not their car. Mad respect buddy. What size sheet of vinyl did you use?

@TheJMedia 7 лет назад

Daniel Horne Thanks man, I appreciate it! I had leftover vinyl from the roll I bought last time but I would say $10 worth of vinyl will be enough to wrap the side splitters