Hi，大家好，我是小丑鱼，喜欢组装各种玩意！
这是小丑鱼组装的手表，自己很喜欢DIY手表，虽然工具不齐全，但是阻挡不了小丑鱼组装的脚步。O(∩_∩)O哈哈~
这是小丑鱼的第一个视频，原来才发现拍摄视频真的很难，剪辑也很难。
一切都在学习中，也喜欢给大家分享自己的“作品”
重点~~重点~~重点~~
小丑鱼在组装手表的时候有哪一些地方需要改进吗？
希望各位指出我的错误，谢谢
DIY 手表 | 手表组装 - 精工白色表盘 - NH36机械机芯
DIY Watch | the watch puzzle - seiko White dial - NH36 mechanical movement
第一步：去除精工表盘上不需要的针脚，并使用锉刀打磨平整。（会产生很多金属灰尘，需要认真吹掉，不然会沾到日期或者玻璃上）
第二步：把精工表盘安装到NH36机芯上
（nh36机芯比nh35机芯多了一个星期的功能，但是不影响它组装到单日历的表盘）
第三步：安装时针，分针和秒针
（安装前需要把日期调整到正12点位置）
第四步：安装已经组装好的表盘和机芯到表壳上。
第五步：使用工具裁剪表杆到合适的长度，然后经过表冠插入机芯。
（表杆和表冠需要使用609粘贴，否则使用过程中表冠会脱离表杆掉落）
第六步：防水圈需要添加防水膏，然后安装到表壳上。
第七步：安装底盖（视频中我没有拍摄到这一步，使用一个工具球就可以了）
第八步：安装手表圈口，拆下双面胶，使其对准12点钟位置，轻轻按压即可
第九步：安装表带
~~~~完成~~~
表壳：100RMB
表盘：45RMB
表带：60RMB
机芯：200RMB
指针：15RMB
圈口：40rmb
100+45+60+200+15+40=460RMB
NH35和NH36的机芯的质量很好，在这里强烈推荐！！！！
重点~~重点~~重点~~
小丑鱼在组装手表的时候有哪一些地方需要改进吗？
希望各位指出我的错误，谢谢
Hi, everyone, I'm clownfish, I like to assemble all kinds of things!
This is a watch assembled by the clownfish. I like DIY watches very much. Although the tools are not complete, it cannot stop the assembly of the clownfish. O(∩_∩)O haha~
This is the first video of the clownfish, and it turns out that it is really difficult to shoot video, and it is also difficult to edit.
Everything is learning, and I also like to share my "works" with everyone
focus~~ focus~~ focus~~
Is there anything that clownfish needs to improve when assembling the watch?
I hope you can point out my mistakes, thank you
DIY Watch | the watch puzzle - seiko White dial - NH36 mechanical movement
Step 1: Remove unwanted stitches from the Seiko dial and use a file to smooth it out. (A lot of metal dust will be generated, which needs to be blown off carefully, otherwise it will be stained on the date or glass)
Step 2: Mount the Seiko dial to the NH36 movement
(The nh36 movement has one more function than the nh35 movement, but it does not affect its assembly to the dial of the single calendar)
Step 3: Install the Hour, Minute and Second Hands
(The date needs to be adjusted to the 12 o'clock position before installation)
Step 4: Install the assembled dial and movement onto the case.
Step 5: Use the tool to cut the stem to the appropriate length, and then insert the movement through the crown.
(The stem and crown need to be pasted with 609, otherwise the crown will fall off the stem during use)
Step 6: The waterproof ring needs to be added with waterproof paste and then installed on the case.
Step 7: Install the bottom cover (I didn't capture this step in the video, just use a tool ball)
Step 8: Install the watch ring, remove the double-sided tape, align it with the 12 o'clock position, and press it gently.
Step 9: Install the Strap
~~~~Complete~~~
Case: 100RMB
Dial: 45RMB
Strap: 60RMB
Movement: 200RMB
Pointer: 15RMB
Ring: 40rmb
100+45+60+200+15+40=460RMB
The calibers of the NH35 and NH36 are of good quality and highly recommended here! ! ! !
focus~~ focus~~ focus~~
Is there anything that clownfish needs to improve when assembling the watch?
I hope you can point out my mistakes, thank you
26 мар 2022
