DIY 10 CH (iBus to PWM) Receiver for FlySky i6 and iA6b receiver

Подписаться 154 тыс.

Просмотров 33 тыс.

50% 1

Hello Everyone,
We are going to make a ten channel PWM receiver (similar to iA10b) using Arduino Nano. It will cost you just Rs.200 for the Nano board and it has wide range of applications. You can use all 10 channels of your tx to make RC robot, RC excavator etc.
You will have to upgrade your transmitter to 10 channels if it still has old 6 CH firmware in it.
Thank you.
Arduino Nano : amzn.to/2NyCQn2
Code : drive.google.com/file/d/1CWA1...

Наука

Опубликовано:

3 дек 2020

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 137

@linecraftman3907 3 года назад

Thank you very much for this, and especially for adding subtitles! 👍👍👍

@SwapnilNimbalkar 3 года назад

You're welcome 😊

@YensR Год назад

Very interesting! Do the standard servo ports of the receiver still work or does using ibus deactivate them?

@leivinreec.dolenzo1099 5 месяцев назад

thank you for creating this video and sharing knowledge this really help me in my robotics also with a subtitle👍👍👍

@bipinmoharana464 3 года назад

Bro.you are great.Maanna padega. God bless you.

@SwapnilNimbalkar 3 года назад

thank you bhai

@BAONAMEEVN Год назад

Thank you very much for this!!!

@ArgonautasDrone 6 месяцев назад

Obrigado pelo vídeo, ajudou muito 🪽👍

@DynoRC 2 года назад

It was so useful that made me subscribe

@SwapnilNimbalkar 2 года назад

Thanks

@varunraghuwanshi3177 10 месяцев назад

Dear, my nRF module is transmitting data some time what may be problem?

@banglahindihobby3299 3 года назад

bahuti kam ka video thank you

@SwapnilNimbalkar 3 года назад

thank you

@jameshayter4896 Год назад

Excellent. Thank you.

@SwapnilNimbalkar Год назад

welcome

@aniketpagi8240 3 года назад

Its So amazing.....

@SwapnilNimbalkar 3 года назад

Thanks :)

@rajatmond 3 года назад

Thanks for this. By any chance, can you explain the nature of the rx outputs? I want to make my own flight controller and I'm stuck because I don't know what protocol the fs-ia6b uses. Thanks

@TanM 3 года назад

It uses iBus protocol,

@rajatmond 3 года назад

@@TanM thanks I already figured it out. And I'm programming it for the pwm outputs only. I'll consider iBus later maybe.

@froggytoad7763 Год назад

@@rajatmond I went down the same path. Getting IBus working is so very worth it. That's if you are using a microcomputer like an Arduino. You'll find that PWM has too many errors. Looks like I'm responding to a year old post. lol. Well, anyone that sees this, please give IBus a good try. This method presented here works great.

@rajatmond Год назад

@@froggytoad7763 yes I used a m7 nucleo dev board(mbed OS). Never got around to using ibus since this is just a hobby and i have to code drivers too if i want to use anything more than pwm.

@gersonmoura6634 Год назад

@@froggytoad7763 Olá, eu tentei fazer mas não funcionou. Poderia me dar mais alguma dica? Obrigado! =)

@Rajsmartsolutions 3 года назад

Jabardast bro

@SwapnilNimbalkar 3 года назад

thanks bhai

@Rajsmartsolutions 3 года назад

@@SwapnilNimbalkar bro heart please ❤️

@frenkkotarigan Год назад

Can we use pro mini instead of nano? 🙏

@sagarpawar2398 3 года назад

Great Brother👌👍

@SwapnilNimbalkar 3 года назад

Thank you so much 😀

@juvinekm Год назад

Great work... Is it possible to use mpu6050 as a gyro with flysky receiver, for rc car?

@SwapnilNimbalkar Год назад

Yes should be possible

@sahilkashi7535 3 года назад

How to make d i y pwm to PPM encoder using arduino

@rva1945 11 месяцев назад

Nice! Can you please explain how you upgraded your TX from 6 to 10 channels? I am afraid of ruining my TX when trying!

@ashkananali8571 3 месяца назад

Please, I need the code. The link did not open for me

@uselessengineer669 3 года назад

Are bhai eshe kehate he content 🤩

@SwapnilNimbalkar 3 года назад

Thank you so much 😀

@jonujangid3J 3 года назад

Bhai aap ne jo brushed esc use kiya h vo heat up hota h kya, life kaisi h uski. Or rc car ke liye speed precise control hota h kya as par throttle response

@SwapnilNimbalkar 3 года назад

Wo faltu ESC hai ekdam. mat lena. costly bhi hai. heat hota hai. isase acchha hai L298N aur arduino se khud bana lo ek ESC

@jonujangid3J 3 года назад

@@SwapnilNimbalkar OK bro main buy karne ki Soch raha tha robu se

@SwapnilNimbalkar 3 года назад

@@jonujangid3J its your decision

@jonujangid3J 3 года назад

@@SwapnilNimbalkar bro aap vedio banav na mini brushed esc ka jo ki rc car ke liye Ho or promotional control Ho

@sagittariusa4606 2 года назад

Kya reciver se power de ne se Arduino nano damage hoga? Jaise apne diya

@SwapnilNimbalkar 2 года назад

nahi

@imapipelaya 3 года назад

Can you write one to use an 8 channel relay board with the FS1A6B and a Nano or Uno?

@SwapnilNimbalkar 3 года назад

that should be easy

@imapipelaya 3 года назад

@@SwapnilNimbalkar that would be awesome!! I've been beating my head against the wall the last couple days trying to figure it out.

@imapipelaya 3 года назад

@@SwapnilNimbalkar Would you be willing to write it for me?

@sajalacharjee7008 3 года назад

Cool

@SwapnilNimbalkar 3 года назад

thanks

@vikarmsaini3976 3 года назад

👍

@Mr.me3001 3 года назад

nice video bro

@SwapnilNimbalkar 3 года назад

Thanks for the visit

@maazshahid8920 3 года назад

amazing, but any disadvantages?

@SwapnilNimbalkar 3 года назад

Thanks, no disadvantages

@kuldipgami4442 3 года назад

bro, where should i buy depron for rc plane

@SwapnilNimbalkar 3 года назад

Search online or may be visit lamington road if you are from Mumbai

@technicalmaanrawat5269 3 года назад

Sir maine i6s transmeetr hai but muje channel set karna nhi aa rhe hai dron ke liye pliz kuch help kar dijiye

@SwapnilNimbalkar 3 года назад

matlab? Aux channels?

@yugalsharmamemes8640 3 года назад

What is the range of this transmitter and reciver in kilomter

@SwapnilNimbalkar 3 года назад

should be around 500m

@dhanashreetodkar9556 3 года назад

Sir can you make Drone using homemade transmitter and receiver which you have make and flight controller using arduino UNO

@SwapnilNimbalkar 3 года назад

I will try for sure

@serekes2002 2 года назад

Nice video Recently I used ibusbm library in one of my projects with arduino nano However I noticed that FAILSAFE is not working with ibus. I was wondering if anyone is experiencing the same problem Temporarily I solved it so that I connected channel 5 to one of the input pins on nano so that the program brakes when failsafe is triggered

@SwapnilNimbalkar 2 года назад

I really have no idea about that

@ankitkushwaha5629 Год назад

I used this program but in serial monitor if a print serial.available it is alwaya giving 0 output, and not working, Rx led is blinking in arduino nano. Please help

@SwapnilNimbalkar Год назад

bind ur tx rx

@ankitkushwaha5629 Год назад

@@SwapnilNimbalkar i have done that rx pin on arduino is also blinking but serial.available is always 0

@DEADPOOL-ti4cs 2 года назад

Thanks

@SwapnilNimbalkar 2 года назад

Welcome

@khmerdrama1951 2 года назад

What Protocol iBus iA10b I'm connect with iA10b it error protocol iA6b please help told me dear .

@SwapnilNimbalkar 2 года назад

it should be same

@skmkh6964 2 года назад

I connect like you I use FS-Ai10B but then I upload error problem uploading to board

@SwapnilNimbalkar 2 года назад

fir arduino ka kuch issue hoga. arduino drivers install hai na thik se? com port dikha raha?

@skmkh6964 2 года назад

@@SwapnilNimbalkar hi you can help me about arduino read FS-Ai10B PWM control servo 180⁰ because usually RC control servo 90⁰ < . How to write code ?

@karanslife75 2 года назад

Sir i want to buy this TRANSMITTER which you are using...can i know where i can get it in mumbai ????and other components too like brushless motor ESC etc Please rply

@SwapnilNimbalkar 2 года назад

Lamington road

@karanslife75 2 года назад

@@SwapnilNimbalkar any shop name u know?

@shootergamers2032 3 года назад

Bhai mere receiver me esc lagatehi shot hua aur fir ny chal raha hai reciver

@SwapnilNimbalkar 3 года назад

ESC kharab hoga fir

@kapilsoni5403 3 года назад

bhai i6x ordered😎from fly robo

@SwapnilNimbalkar 3 года назад

good decision

@voldoreabhi 2 года назад

I did the same, it was working fine.. then it stopped. PPM shows zero signal always... But individual servo pins do work.. only problem is with ppm pin. Why it stopped. Any ideas?

@SwapnilNimbalkar 2 года назад

have you turned on PPM output in TX?

@voldoreabhi 2 года назад

@@SwapnilNimbalkar yes

@voldoreabhi 2 года назад

Apology for any typos.. i meant to say that the ibus pin is not working... The individual ppm pins for servos do work. I have enabled PPM.

@ankitkushwaha5629 Год назад

@@voldoreabhi same is happening for me do you get any solution for this ?

@mycreativevlog 2 года назад

Bhai mere me code upload krne ke bad Serial moniter me kuchh bhi dikh raha hai...pura setting kr chuka hu fir bhi Koi channel kam bhi nhi kr rha h

@SwapnilNimbalkar 2 года назад

board check karo ek bar. LED blinking ka code upload karo aur onboard LED jal rahi hai ki nahi mujhe batao. Mai instagram pe online rahta hu you can talk there

@phusromishra6305 3 года назад

सर आपने जो ट्रांसमीटर और रिसिवर बनाया था उससे एक प्लेन या फिर ड्रोन उड़ाने के लिए आप कम्पलीट वीडियो बनाए प्लीज

@SwapnilNimbalkar 3 года назад

ha uska use karke ek plane banane wala hu mai

@shootergamers2032 3 года назад

AA cell se receiver chal sakta hai kya

@SwapnilNimbalkar 3 года назад

@DMANUYDV 3 года назад

What is the price of this transmitter (flysky fsi6)

@SwapnilNimbalkar 2 года назад

amazon pe dekh lo

@ashkananali8571 3 месяца назад

I need the code please

@kapilsoni5403 3 года назад

bhai aap 1000 kv ke motor ka plane kitne %throttle me udate ho

@SwapnilNimbalkar 3 года назад

wo plane pe depend karta hai. Mera sabse pahla plane jo pusher tha wo sirf 30% throttle pe udta tha.

@kapilsoni5403 3 года назад

aapne jo 3 saal phle plane bnaya tha jiske 4 parts the usi se inspired mene bhi ek plane taiyar kiya hai aap se jald hi share karunga transmitter aane ke baad flight bhi krunga wingspan 50 inch and length 37 inch 1000 kv motor, rudder and elevator simple 3 ch plane☺☺☺

@anitarawat1815 3 года назад

Bhaiya iski range phele kitni thi aur ab kitni ho gayi hogi

@SwapnilNimbalkar 3 года назад

isase range utnihi rahegi kam jada nahi hoti

@innovate3d303 2 года назад

serial monitor par cilk karane port busy aa raha he

@SwapnilNimbalkar 2 года назад

dusra kuch aur program run kar rahe ho kya

@indianculture4789 28 дней назад

Bhai fpv head tracket bnao please😮❤❤❤❤

@Krishgupta007 2 года назад

this code is work in arduino uno?

@SwapnilNimbalkar 2 года назад

yes

@addiction-69 3 года назад

Bro, please make this type of 10ch transmitter by Arduino...

@SwapnilNimbalkar 3 года назад

Oh. 10ch tx? try karunga pakka. uske liye STM32 board use karna padega 72mhz wala. Arduino is slow runs at 16mhz

@addiction-69 3 года назад

@@SwapnilNimbalkar thank you bro, I will wait for your TX project...

@SwapnilNimbalkar 3 года назад

@@addiction-69 ya sure

@rcbuildmaster6192 3 года назад

Nice try , but again it will get more lag , regular flysky receiver is equiped with 32 bit processer , and Arduino is 8 bit , so the latency will be quit high using Arduino , flysky receiver has 76ms latency and may be with Arduino it would be 900ms But at the end of the day Nice try , keep it up

@SwapnilNimbalkar 3 года назад

I dont think there is much latency. And for robotics applications or even RC planes this much of latency is ok.

@rcbuildmaster6192 3 года назад

@@SwapnilNimbalkar yeh you are right , nice try

@darwinakash6520 3 года назад

How to convert Transmitter to 10 ch bro

@SwapnilNimbalkar 3 года назад

oh. uske liye ye video dekho ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-I8ilTsO74lg.html

@Rajsmartsolutions 3 года назад

Bro kya mai (quartz component.co) website se electronic saman manga sakta hu kya ye website safe hai please reply bro

@SwapnilNimbalkar 3 года назад

pata nahi yaar, mai pahli bar sun raha hu iska naam

@Rajsmartsolutions 3 года назад

@@SwapnilNimbalkar love you ♥️ bro thanks for reply

@SwapnilNimbalkar 3 года назад

@@Rajsmartsolutions Cool

@phantomtech287 2 года назад

Wiring diagram plz not clear in the video

@SwapnilNimbalkar 2 года назад

It should be

@izhanjunaid2502 3 года назад

Plz make a cargo plane

@SwapnilNimbalkar 3 года назад

ok try karunga

@bejnathnarvariya5708 Год назад

Jaisa aap dc mind ko bhejta ho

@bejnathnarvariya5708 Год назад

Bhai aap apna video per code bhej karo

@SwapnilNimbalkar Год назад

@kpwankhade4795 3 года назад

Hello dosto... Mere Bhai mere dost paper airplane kut paryanta ala re

@SwapnilNimbalkar 3 года назад

aaila banawto banawto nakki

@ffgemar8854 3 года назад

Rimot kantorol. Robot. Banao

@SwapnilNimbalkar 3 года назад

ok ok

@mohamemdhalim1235 3 года назад

bhai comment ka jabab Naidia please bhai jabab dijia

@SwapnilNimbalkar 3 года назад

kaunsi comment

@mohamemdhalim1235 3 года назад

Sorry bhai jabab mila thank you very much ap reply message nehi aiata

@Er_Maneendra_Singh 3 месяца назад

Paisa barbad ho gaya

@diyzona Год назад

English clickbait title. Language not english.

@SwapnilNimbalkar Год назад

dude...........

@diyzona Год назад

@@SwapnilNimbalkar I just watched 15 videos with English title and English speaking voice. And guys are from Afrika!! So either go learn English or stop this English titles thing.