Thanks! Great video, I need to do my 2010 TSX, I'm pretty sure it's extremely similar. I've already replaced a ballast once. I'll report back after trying. One thing you might add to your process is running the wire thru the headlight cap before crimping connectors on. Then you could drill a smaller hole and seal it up much easier with just a dab of something.
REALLYYY appreciate the video my bro!! I’ve also been lookin for a detailed install video for HID-LED headlights and this hands down has been the BEST ONE !! You just got a new Sub 👌🏽🤞🏽
when i did mine (last week) i didnt have to do all of that. all i had to do was put the led bulbs in and was able to use the -/+ pin from the bulb and just put them right into the connector -/+ and that was it.
thats the way we do them but the kits dont usually come with that type of cable we just have alot from OLD HID kits we have laying around so thats why we showed how to do it this way.
@@socalaccessories6687 ooo okay understandable, im still learning the tsx chassis myself so when my bulbs came in it was different from urs so it makes sense on why it was different to install.
What then was your solution for putting the dustcap back in place? Yes, just connecting the LED wiring to your headlight wiring without splicing anything would be best, but I do not see how to avoid drilling an extra large hole into the dustcap for the connectors to fit, so you can put the dustcap back in place.
I have an 04 tsx. The previous owner already converted to a LED Lasfit D2S. I bought the correct bulbs and installed them. For some reason the lights will just shut off after 5 minutes. The next day they come back on but will shut off after a few minutes. Any feedback would greatly be appreciated.
it may be a defective item, easiest way to check that is take the bulbs and swap sides it the issue follows the bulb then is a bad bulb is the issue is still on the same side for example the driver side headlight then most likely a bad connection or a bad fuse.
Correct they do have Fans to help keep the Chips cool but its fine with the dust caps on the kits have a 1 year warranty and would not want to tell someone to not put that caps back on because then you will get moisture into the headlights
New subscriber I have a 2004 Acura TSX I'm not sure what type of headlights I have I guess it's factory I only have $160,000 mi on it would I go with HID or LED how do I know what I have and will a D2S bulb fit it keeps cutting on and off on the driver side please help I have checked the fuses as well
Thats correct or now we also have a kit that plugs into the oem ballast but both oem ballast would need to be working for the new style one that we have thats plug and play, but this style the ballast is no longer needed.
Hello S.C.A THANK YOU FOR THIS VIDEO Can you send me the website so I can order the kit like today , next week I have to pass Delaware state inspection thank you again
we only really suggest this when the oem ballast is out. if you just want to upgrade to led we now have led bulbs that plug into the oem ballast for that vehicle.
I am looking for one on eBay for my 2004 Acura TSX and the plastic piece that has to be taken out from the light bulb to place first in the headlight seems that it doesn't fit, could you help me with which one I need plz?
Sorry just seen this but this is not really brighter then the oem kit its just since most of them have the oem ballast go out and those can be expensive.
yes you can but on the tax it is a tight fit but I have done it on 2 of them already kinda have to try all 4 covers on each side till the plug goes into the closed area then you put the dust cover back on.
It might be. I'm looking into doing this because Acura is charging 500 CAD for each ballast, plus 200 per bulb and 100 for each igniter. I have a flickering bulb and no one is willing to even try to fix it unless I replace all the parts. I don't have that kind of money for a car from 2006. If I can get the lights to work properly for a couple hundred bucks and never have to worry about those *#$^ing ballasts ever again, perfect. Getting the ballasts swapped out is a giant pain in the butt, especially if it ends up NOT being the ballasts.
I made this video because fro the year most people have 1 or 2 of the oem ballast going out and dont want to spend the money on a new ballast so this is also very bright and most kits come with a 1 year warranty or at least the ones we have
Jimmy M www.socalaccessories.com/d2r-d2s-led-kit-pair/ just add a note when you do the checkout asking me for H11 wires for TSX and I’ll just toss them in your order for you.
the kit i put the link for is for the low beam you can also make the high beam led but that size it uses is a small H1 size so you will have issues not being able to fit the dust cap back on
Abibnoor_JDM MY in my opinion I would if said hid a few years ago but led manufacturers have finally passed up HIDs they are not brighter and have less defects for like the last 2-3 years
made this video because fro the year most people have 1 or 2 of the oem ballast going out and dont want to spend the money on a new ballast so this is also very bright and most kits come with a 1 year warranty or at least the ones we have
