DIY 2X4 Bow Stand for the Archery Shooting Range

Подписаться 706

Просмотров 43 тыс.

50% 1

DIY Archery Bow Stand using 2X4's & screw in ladder hangers!
Tired of laying you bow in the damp grass and dirt in between rounds at the target range. Here is a fairly simple and low cost alternative to the PVC bow stands that you normally see on the internet!
Stand dimensions are 20" X 14" X 46" center mast. Main construction using 2X4's; Purchased Material: 2x screw type "Ladder Hangers" & 18" magnetic strip to hold accessories from Harbor Freight! I pre-drilled all holes prior to installing screws & hangers! Ended up applying two coats of Spar Urethane for wood protection against the elements.
Thanks for watching & HH
I created this video with the RU-vid Video Editor ( / editor )

Опубликовано:

2 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 85

@starrstewart7083 3 года назад

I did it with Woodprix.

@ErlefromVa 3 года назад

Really, my plans are 40 seconds in and this vid is 4 years old... so if they have plans for this they probably stole my idea! If you built one... enjoy it!

@GeoffWildehawkphoto 7 лет назад

I like the wood versions better than the PVC, and yours is one of the VERY few in wood. I'll be borrowing the idea :) Thanks for the video.

@ErlefromVa 7 лет назад

Let me know how it turns out, better yet send me a picture when it's done! Glad my vid was helpful for you & Enjoy your day at the range!

@kan-zee Год назад

Well done...for your next build....I wanna see an R2-D2 ..LOL seriously though....this is a nice BASE Camp archery set up.

@ErlefromVa Год назад

Thanks, appreciate your comment!

@ZachByrd 8 лет назад

Dang man! That's a really nice setup. I might have try to make one of those. I hate having to set my bow and arrows down on the ground, especially considering my kids are always trying to pick them up. Good job on the design too.

@ErlefromVa 8 лет назад

Doesn't take long Zack with a few basic tools and 2 2X4's. You can pick the ladder hangers up just about anywhere. Got my hangers & magnetic strip at Harbor Freight! Thanks for watching and HH

@ZachByrd 8 лет назад

No problem Erle! I was shooting yesterday and was kicking myself for not making one!

@PonderosaSoundStudio 5 лет назад

Thanks so much for posting this - just built my own today, based closely on this one.

@ErlefromVa 5 лет назад

Enjoy your stand!

@johnzarn3367 5 лет назад

Love it!!

@OurPalawanExperience 8 лет назад

That's nice!...you ought to make a couple and sell them at the shooting range or sell them to the range for them to rent out....gravy money!

@ErlefromVa 8 лет назад

That does sound like a good plan, after three or four I'd have assembly down pat! Thanks for stopping in Ray!

@elissitdesign 3 года назад

Holy shit this is beautiful! So many rad features. Thanks for sharing.

@ErlefromVa 3 года назад

Thanks for watching enjoy

@jamescone6435 8 лет назад

i was thinking pvc but after seeing yours I'm going to make a wooden one, very nicely done.

@ErlefromVa 8 лет назад

Go for it, show me a pic when your done! Didn't take long to build with a few basic tools! Thanks for stopping by and the comment!

@barry7608 3 года назад

Not the most stylish but very practical and its NOT PVC!! Thanks I like the idea and feel the same need when practicing. I will try and make mine out of bamboo as I am growing plenty. Your idea is the start and it can be styled to suit and I like it.

@ErlefromVa 3 года назад

Good luck and enjoy!

@davidschwartz2398 6 лет назад

You could probably sell this in kit form on ebay. Great job!

@ErlefromVa 6 лет назад

I was seriously thinking about that, need storage room for supplies and SPACE to construct/ package and prep shipments! Don't see that happening any time soon! Thanks for watching however and for posting such a kind comment!

@Ramirezja76 5 лет назад

I'd buy one!

@CalvinsCorner72 8 лет назад

Cool Idea. Glade it worked for you. You know people just don't care to help themselves no more. You went above and beyond. Hey good looking Jeep too. Thanks for sharing.

@ErlefromVa 8 лет назад

Thanks for the Jeep comment, she's a 95 pretty much a stock 4 cylinder but she's mine and we have a relationship! Thanks also for the bow stand comments, it turned out pretty cool and should function well at the range!

@robf8023 6 лет назад

I built the same stand today brother.. Thank you for posting this.. I'll make a video or post a picture tomorrow... I couldnt find a good magnetic strip that would hold anything heavier than a nail.. I think I may drill in a rubbermaid container or use velcro and add some cool guy patches.. I also added wheels on one side so I can tilt it and roll it where I need. I also used a 4x4 for the center instead of a 2x4.. Im probably going to either stain it or camo spray paint it. Thanks again Erle

@ErlefromVa 6 лет назад

If you got a Harbor Freight store near by they have the 18" magnetic strip that I used for cheap. Sounds great and glad you built your own stand! Look forward to the picture!

@qkdraw0331 8 лет назад

Pretty cool Bow stand Erle! Yep, it's getting to be that time again. I just put my trail cam out tonight,the neighbor has three nice bucks on his cam,one with double brow tines,looks like a twelve and already mounting a doe, another with two main beams on one side,hopefully i can send you some pics.Nice job and take care! qkdraw

@ErlefromVa 8 лет назад

Send me some pics like last year! You always have those non typicals running around! I really like the bow stand!

@tarlwood2238 4 года назад

This is perfect, making one. Thanks for the idea.

@ErlefromVa 4 года назад

Tarl Wood hope you enjoy it! Shoot away...

@daviddowd3764 5 лет назад

Sweet job man, great information, I have my own bow range and this will work perfectly.

@ErlefromVa 5 лет назад

David Dowd Good luck building your own stand! Send a pic when done

@ccerda12 6 лет назад

Looks like it's been awhile since you made this video. How's it holding up?

@ErlefromVa 6 лет назад

ccerda12 works great and doing well. Ended up putting two or three coats of spar urethane to water proof it. Great project to put together with garage scraps and a quick trip to harbor freight

@diggingintoyesterday400 8 лет назад

Good job. Turned out nice looking. Sure to come in handy

@ErlefromVa 8 лет назад

Thanks DIY, Turned out better then I expected or pictured in my head! Thanks for stopping by!

@jriz6519 7 лет назад

Very cool, I like the idea of the magnetic strip

@ErlefromVa 7 лет назад

Thanks for watching and for the comment! Yeah, I like it too, just seemed like the perfect add on when I was in Harbor Freight! Works great as well for holding metal objects at arms length!

@CrossBow206 8 лет назад

Dam Erle I like that, just got back from my sons hunt he took a nice 4 point muley, my hunt starts first of Sept

@ErlefromVa 8 лет назад

Thanks for stopping by CrossBow! Congrats to your son and good luck come Sept. Bow season here in Va. starts Oct. 1st and I got the fever already! Been wanting a bow stand for a few years, finally sat down and got it done! Like it a hole lot better then using PVC. Thanks for the comment, heck I even put a couple coats of Spar Urethane on it. Maybe it will last long enough to pass it down to my daughter one day!

@AmericanCoinHunting 8 лет назад

Cool range stand DIY project you made Erle , very nicely made .

@ErlefromVa 8 лет назад

Thanks Brother, something I've kept on the back burner and finally sat down and did it Thursday afternoon! Thanks for the comment!

@terrysanders2817 2 года назад

Well presented!

@eetswaadams6171 5 лет назад

Bloody brilliant cheers m8 can't wait to put this beauty together

@ErlefromVa 5 лет назад

Fuk MVB good luck o your build! Glad you enjoyed...

@stevearce1498 3 года назад

Nice

@davidhefner5668 3 года назад

I'll make one for a recurve.

@ErlefromVa 3 года назад

Good luck and enjoy

@lukebrasseaux6159 5 лет назад

That set up is great. Excellent idea.

@ErlefromVa 5 лет назад

Testing the Outdoors thank you

@jakedevillier5863 7 лет назад

Great idea. I'll be making one soon!

@ErlefromVa 7 лет назад

Doesn't take long, spruce it up as you like and enjoy!

@EnterTheDeep 4 года назад

Nice caddy. I took a quick look at this video and built my take on it , actually a pair of them. I added what I thought was an original idea with the bolt to the upright part for easier travel, then I rewatched the video and saw the bolt so that was a cool moment. Great job, thanks for the video.

@ErlefromVa 4 года назад

INCREASING LAWLESSNESS Good luck and enjoy your stands

@captainjaxx3728 4 года назад

Great stand,,, gonna build one for myself,,, probably add a little cedar stain, for looks, thanks for the idead..... !!!!!!

@ErlefromVa 4 года назад

Captain Jaxx your welcome, Enjoy! I ended up putting several coats of spar urethane on mine!

@NomadicAdventuresEst2010 8 лет назад

that's really kool great idea

@ErlefromVa 8 лет назад

Thanks Brooksy, just finished putting the second coat of Spar Urethane on it to protect it for my lifetime!

@ronniewilliams9365 6 лет назад

Great idea! I used a 4x4 for my center post but it came out really good. Thanks for the video. I'd show a pic but it won't let me.

@ErlefromVa 6 лет назад

Send me a picture @ shulle333@comcast.net, would love to see your stand! Congrats and hope you enjoy!

@alankroh1111 3 года назад

Sweet set up! Where you at man? I'm in Front Royal?!

@ErlefromVa 3 года назад

Winchester, sorry been having trouble getting notifications

@alankroh1111 3 года назад

Thats awesome! No worries.

@ErlefromVa 3 года назад

@@alankroh1111 Been hunting, if so Hope you've got a nice one!

@deborahpaterson584 4 года назад

Thank you for this. I built one last night. I sent a picture to my son and it’s now in his Christmas list.

@ErlefromVa 4 года назад

Hope you enjoy your stand! Now go practice at your range...

@stevearce1498 3 года назад

Nice

@ErlefromVa 3 года назад

Thank you!

@Curtis7391-t8q 5 лет назад

Love the stand

@ErlefromVa 5 лет назад

Thanks for stopping by, watching my vid and leaving a comment! Your half way there, now go and build one for your self! Happy Shooting!

@badmommagoose5517 7 лет назад

Thought it was so cool I made one exactly like it! 👍

@ErlefromVa 7 лет назад

PM a picture, would love to see it! Hope it works well for you! I ended up putting two or three coats of Spar Eurathane on mine for wood preservation. Looks great works great.... Hope yours does too!

@davemedler361 6 лет назад

Thanks for the video! My stand turned out great thanks 👍🏻

@ErlefromVa 6 лет назад

Awesome, glad you made one and should last you for years! Have fun at the range!

@davemedler361 6 лет назад

ErlefromVa ha ha yeah made one adjustment as I have an obscene amount of arrows lol and whacked some stain on it! Check out my instagram @lifeonthe_fly

@ErlefromVa 6 лет назад

@@davemedler361 yes you have an insane amount of arrows, that's a good thing though. Loved the adjustment using tubing for the arrow rest. You made yourself a great little stand. Glad my video was usefull for ya! I ended up staining and putting spar urethane on my as well.

@coltonjdavis 6 лет назад

Do you have a list of cuts and lengths?

@ErlefromVa 6 лет назад

Colton Davis key dimensions are on my drawing @ 0:40, the base I just used a 2x4 scrap and measured out as needed for a tight fit. Good luck and enjoy!

@coltonjdavis 6 лет назад

ErlefromVa thanks!

@ErlefromVa 6 лет назад

Your welcome

@robf8023 6 лет назад

This is killer!

@ErlefromVa 6 лет назад

Robert Furloni I appreciate your comment and thanks for watching! Happy shooting...