DIY 6.7 Cummins EGR delete. Off-road use only. Cleaning EGR purposes only. 

Hey hit that sub button already it’s free!

Thanks for taking the time out to make a video of all this. Very helpful.

I found that using a flex head ratchet with a wobble extension works perfect for the bolts at the firewall.

(At the end of the video)…….. don’t worry, I just let my grid heater wire touch something metal the other day and now I’m not sure if it works or not.

I did mine exactly like you did because I couldn’t get that piece out of the head so I just shoved the hose over it 😂 and I touched the ratchet to the positive too lol

I seen ur truck at Mario's in frostburg Maryland and seen ur yt sticker on ur back window nice truck 👍

Nice wordage! 😉

Rollin down the street with a five inch straight pipe looking to hit 800,000 see you egr their

Hey man. On the exhaust side of the manifold. Did you reuse the original gaskets for the block off plates?

Stupid question…if you temporarily remove your egr, will you see codes? Since the plugs aren’t attached to the system?

Did you drive it without a software delete ? Or if you deleted it what tuner did you use and did you tune it before or after the physical delete

Thank you for makin the vid. I was just wondering, do the o rings under the blockoff plate on the right side need to be lightly oiled first or just put on dry?

I'm in the process of a good cleaning of mine along with already got the exhaust all cleaned up but now I'm going to program the system to be able to race. I'm not going to remove the cooler and the EGR stuff just yet but don't want anything to become confused. So far I see the two connectors at the EGR but then, passenger side there's the one on top/left but then one a little lower, more to the starboard side of the truck. When I do the clean up on my EGR and such, do I need to disconnect the 4th connector on this 14 Ram Cummins or does that 4th one stay?

Well I’m making making my truck off-road

Wow dude is all nudge nudge , wink wink.

How do you install a program? Do you need special equipment? Where would a person find this program?

Was the fuse the issue mine won't start waiting for batteries to charge but I forsure sparked a few times lol

Great video. I am considering to go off road with my truck. Could you share the info of the parts needed to perform the clean of the egr? Also; what type of tuner and where to get all parts? Thank you very much!

Did you have to put gasket on the 2 plates on manifold.

Hello good sir what code did it give you for those terminal fuses

What year is this truck?

I did mine but I have egr codes how do I clear them? Do I need a tuner?

Do you know if this will work with the 5500s? I've heard you need a different delete kit but aren't they the same engine?

Do you have a link for the kit you used? I can't seem to find one that's not at a ridiculous price

You did not install the support bracket at passenger side?

Borren todo el sistema de DPF No se la compliquen Ese sistema es una basura, pura perdida de dinero y de tiempo One word. DELETE!!!!!!!

Did you installed a program after did this ??