DIY Aquarium LED Light WRGB with Luxeon Led 

ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-UoOGy1gmD2k.html

RGB led PCB board

It's called by name "polycarbonate sheet for led lighting"

@@diyformyhome2265 What's the thickness of the sheet?

ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-UoOGy1gmD2k.html

With the grb led controller you can completely control the colors separately. using the intensity correction of each color in the App. You can also schedule the lights to turn off and on each day according to the present cycle. U can see more about Controller led at link: www.amazon.com/Nexlux-Wireless-Controller-Compatible-Included/dp/B07116SX41/ref=pd_lpo_60_t_0/144-3267273-0150427?_encoding=UTF8&pd_rd_i=B07116SX41&pd_rd_r=c846f476-28a5-4d05-9b1c-919bbd955fbc&pd_rd_w=8w5mx&pd_rd_wg=eDvkl&pf_rd_p=2eae1586-a44a-4b21-997a-1dfc1740e496&pf_rd_r=WRW2GMH2VQBJG7F277H3&psc=1&refRID=WRW2GMH2VQBJG7F277H3

@@diyformyhome2265 thanks a lot bro for assisting us. U have complete knowledge. Great. The light also looks so perfect. Happy aquascaping .

ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-UoOGy1gmD2k.html

I'm very sorry, this product is not sold on amazon or ebay.. we bought them on a small local store.

ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-UoOGy1gmD2k.html

Hey can u please give me the electronic products list... Like power supply, used resistors... Led's wattage

This is the led trough W106 (width 106mm)

@@diyformyhome2265 Where we can get them in India ?

Can we buy from AliExpress or Amazon?

I rely on color ratio White 10000 (kelvin) + White 65000 (kelvin) + Yellow --> 40% Red --> 20 % Green --> 20 % Blue --> 20 %

Wt will b da ratio if i use 3wt

this's Polycarbonate sheets for LED lighting

I used resistor 10 ohm-1/2W

ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-UoOGy1gmD2k.html

Size: 8,5cm x9cm x1mm 16 led/PCB Power 12V Material: aluminum

Every led panel has 12 Led core . Also has 12 W, My light have 6 panel , Total 12 x 6 =72 W. Completely enough for the plants to grow.

ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-UoOGy1gmD2k.html

you're right, we can use the driver module for each led sheet But I calculated it to run at 60 - 70 % power of led only using a resistor and a 12V -5A power adapter is much cheaper. compared to led driver module

ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-UoOGy1gmD2k.html

You should be add the module adjust more. You can see more information with link: www.amazon.in/Techtonics-Motor-Control-Regulator-12V-40V/dp/B07QB8WD1X

ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-UoOGy1gmD2k.html

I bought them in the electronics store. This is Led luxeon with with specification. Chip type: High power Epistar led chip Led format: luxeon format - Power: 1W - Current: 300mA - 350mA (1W) - Certifications: CE, RoHS -Color: + Yellow (2000 Kelvin) + White (6500 Kelvin ) + White 10000Kelvin) Wavelength of color led: + Red (620nm - 625nm) + Green (520nm - 525nm) + Blue (460nm- 465nm) - Degree: more than 50,000 hours -Current: 3.0v-3.4v (only red: 2.2v - 2.4v) And Resistor 10 ohm-1/2W You can change them with the another led has same specification .

It's there in video..Pls watch the video till the end

yes, This is Light for planted

You can use any microcontroller that you want (Arduino, Raspberry etc..) along with Wifi module and PWM module.

ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-UoOGy1gmD2k.html

I used 12V for 3 Led , You need resistor 10 ohm-1/2W. With: Red led: 2.2V (1W) Yellow, white, blue 3.2V (1W) electric current: ~280-300 mA I set it like that for the purpose when led be using long time make the temperature increases after that voltage will put on the resistor, didn't make to break down led. You also use 4 led /12V and don't need mount resistor .

you can buy on taobao.com or aliexpress.com

@@diyformyhome2265 direct link please, i don't know the name PCB call off

@@diyformyhome2265 link buy PCB board

@@diyformyhome2265 link you buy please

they're fan for VGA computer card