DIY Arduino Nano Soldering Station V5

Подписаться 11 тыс.

Просмотров 21 тыс.

50% 1

DIY Arduino Nano Soldering Station V5. Hello everyone!. I made a new version of the T12 soldering station based on Arduino Nano, a few changes are made to the software, now it shows the PWM power level that the sation applyes to the tip, other chenges I made is that now everything is now smd components, basicaly I transfered all the components of the Arduino Nano and Mini360 to my pcb, unfortunaly I can not put all the components on a single board so I also used two boards on this version as well. The soldering station now can be powerd from a barrel jack connector and USB type C and I also included a mini USB to upload the firmware to the soldering station easily as you normaly do with Arduino, now I decided to use buttons instead of the rotary encoder and lastly I made a beautiful 3D printed case.
Link to original project of Stefan Wagner:
RU-vid video: • T12 Soldering Station ...
EasyEDA site: easyeda.com/wa...
Link to Software, Schematic, PCB and STL files:
drive.google.c...
Thanks for watching, if you like this video please Like, Share and Subscribe to suport my Channel !!
Support me on Patreon: patreon.com/us...

Опубликовано:

17 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 74

@vencislavvankov4897 Год назад

Congratulations! I think working with buttons on this little box is inconvenient. It's much better with Encoder. And as you have done it with SMD, the project now looks like that of Stefan Wagner.

@mrpiramidon7140 Год назад

v6 - leave encoder. on the button quick change save favorite T12 tips =) Thanks!!! use first version station, work fine!!!

@HMProjects Год назад

I don't think it will be a V6, that's the last version :). I leave it to everybody else to modify it further as they will.

@gustasvindziulis Год назад

@@HMProjects could you then share the editable pcb files so we could modify as we like

@СашаРубанс Год назад

RESPECT!!!👍

@Utkrant_Hingonekar Год назад

@@HMProjects Can you Please make a soldring station for hakko 907 ?

@HMProjects Год назад

@@Utkrant_Hingonekar I actually have one, but I have to find some time to make a video about it.

@deterdamel7380 9 месяцев назад

Nice work. But it seem that a least one button is to close to the GX-connector.

@minhnguyenanh5736 Месяц назад

You should use P mosfet instead of N mosfet, because when arduino not working or transistor Q4 fail the tip will working maximum heat.

@johanbarnard6709 18 дней назад

Very nice work! What are the ratings for the capacitors used in this project please

@repairguideman Год назад

Pls add c210 tip option in this. So that,micro soldering can be done with this

@fajarsan329 Год назад

Wish it works with t210, Nice work anyway

@Evilslayer73 10 дней назад

Which model of soldering handle are you using with the station?

@moobdi3 Год назад

The next version you can use a rechargeable lithium batteries and using it as a portable soldering iron

@agunghartama9382 2 месяца назад

Hello, did u use sleep mode? How implement this with sleep mode if i docking the solder?

@nenebaez4145 Год назад

Hello excellent video, make a video of how to do those pcb board design

@sklepa Год назад

Nice work. I respect that self made two layer pcb's, and nano components transfer, instead of using plug in module. Im feeling it, because I just finished my own jbc station on sunday, and as I suspected it would be so much cheaper and faster just earning the money and buy the fucking thing xD. But anyway.

@Utkrant_Hingonekar Год назад

Can you Please make a soldring station for hakko 907 ?

@meddiys6171 Год назад

Excellent.

@Stefanev Год назад

Great and beautiful work. Thanks! 👍💰

@HMProjects Год назад

Thanks!

@irmadion4904 7 месяцев назад

Hello, It is compatible with Weller RT series tips? Of course with a necessory cable for Welle RT-Tips 3.5mm Jack!

@hedi875 Год назад

Hi. Can i replace the LM358 by an MCP602 (less noisy) ? Thanks.

@HMProjects Год назад

Yes, of course you can. Actually is even better the MCP602 is rail to rail and it will provide more stable and accurate temperature measurement.

@diybuilderde Год назад

do you have the bom file for the smd assembly ?

@lagkun8271 26 дней назад

Hello sir , I used a 0.96 inch screen instead of a 1.3 screen and it was shifted 3 pixels to the right. Can you help me fix it?

@3DprintRC 10 месяцев назад

Will you make any review video about V5.0 about this project?

@betaalyt3809 3 месяца назад

What about the sleep mode(fixed or adjustable) & temperature calibration?

@HMProjects 3 месяца назад

The sleep mode is adjustable from 1 to 30 min. and the calibration is done in 3 steps by adjusting the difference between temp. measured by the station and the real temp. which you have to measure it with a multimeter or a dedicated thermometer.

@betaalyt3809 3 месяца назад

@@HMProjects thanks for the reply. I want to know that can I calibrate the temperature in menu options?

@betaalyt3809 3 месяца назад

@@HMProjects you are amazing. great job man

@Радиотека Год назад

But could you add a power limit setting to the firmware? I have a jbc sting and on a weak power supply it goes into protection, when 80% of the power is set in the firmware, it works with any power supply. But I can't add it to the menu and I have to flash

@Javad.Zare1362 День назад

Hi my friend I am Javad from Iran and congratulate you for your very good things, please send me the project's win file. For PCB

@3DprintRC 10 месяцев назад

Can we do this project which you share in describtion video attachment files?

@nyeinchanzaw6936 Год назад

Great work!!!

@HMProjects Год назад

Thanks!

@minhsangdidong9080 Год назад

can you send me the circuit diagram of the soldering station to control the temperature for the goot RX80, or can your circuitry be used for the goot soldering tip?

@svsv9 Год назад

At 320 degrees with 15.3 nominal voltage, what could be the load current? I am taking a look at Power supply deciding for a 24V and 3A 70 Watt Max.

@HMProjects Год назад

I don't remember exactly the power consumption at 15 V, but I can tell for sure that 3 A power supply is more than enough.

@svsv9 Год назад

@@HMProjects thanks.

@d2yo1 11 месяцев назад

None PID ?

@svsv9 Год назад

What is your thinking if I decide to put a second Female Aviator socket for a second heat handler let say, a 2 Pole commute switch to activate "Line 1" or "Line2" Do you think I may damage it, I am working on a Dual soldering station, but I get lost to figure it out how make it digital, or automatically identification of the tip when is turned on.

@HMProjects Год назад

By selecting one on the time it should work ( assuming that everything is wired correctly ) but if you put two tips in parallel at the same time it may damage it or it it not work correctly because you changing the heater resistance and the thermocouple resistance. The best way in my opinion is to make two of this soldering stations or the through hole version ( V4) and put both of them into a nice case, in this way you will have two displays, two independent control of the tips, one it can be in standby while working with the other one, you can set the temperature independently for each tip and so on. 😉

@svsv9 Год назад

@@HMProjects Thank you for early reply, I don't know why RU-vid does not inform me replies when I have to get them. So Mechanically it won't have a problem if I switch and wire correctly. I am thinking commuting the 4 wires from one GX4 to another GX4 aviator connector. Fancier the way you share two independent system one Power supply with double output is a big form factor because of the PSU. I will see it what it is better. There's a way I fallow you in some social network? I would like to share pictures about the station based on yours version. Have a great one.

@naveentechs 5 месяцев назад

Please make V6 with Encoder

@HMProjects 5 месяцев назад

I have built V4 that uses rotary encoder, you'll find the video on my channel.

@dhairyasoni7467 Год назад

Need analogue potentiometer for temperature set like previous version

@HMProjects Год назад

On the previous version I used rotary encoder not potentiometer. Anyway I wanted to make it a little bit different by using buttons.

@dhairyasoni7467 Год назад

@@HMProjects go it bro

@MuhammadOwaisKhan83 11 месяцев назад

C210/t210 tip support???

@phiphan4732 9 дней назад

that's what i want to ask

@meax7180 8 месяцев назад

What is the max input voltage from dc jack?

@HMProjects 8 месяцев назад

24V, but I recommend to use 19V.

@meax7180 8 месяцев назад

Would it work with 16v?

@HMProjects 8 месяцев назад

@@meax7180 Yes it will work, it works even with a 12 V supply, but with lower voltage the heating time of the tip will be significantly longer. Make sure your power supply has an output current of 3A.

@mohammadhoutary1338 Год назад

Can you share your gerber pcb design for this version

@HMProjects Год назад

Everything you need is in the Iink in the video description.

@mohammadhoutary1338 Год назад

@@HMProjects thank you ❤️ , how much max the watts

@HMProjects Год назад

@@mohammadhoutary1338 The tips are rated for around 70W at maximum voltage 24V but I will not go so far, at least with this soldering station, 19V is the maximum voltage that I recommend and the power at this voltage level will be around 45W wich is more than enough.

@mrpiramidon7140 Год назад

@@mohammadhoutary1338 with netbook charger 19V 2.1A works fine (max temp, K tips, PID-mode)