DIY Blast Gates for Dust Collection!

Подписаться 159 тыс.

Просмотров 27 тыс.

50% 1

BUILD PLANS FOR SALE:
scottwalsh.co/collections/plans
Since moving into my new shop in the fall, I had yet to set up my dust collection system. I was tired of my cheap plastic blast gates, and I want to eventually automate my whole dust collection system. Therefore, this was a fine time to design and build my own blast gates!
I used ¾” and ¼” MDF for this, since the surface texture is so smooth and MDF tends to be flatter than plywood. Both of these attributes are important for a good seal around the gate.
I didn’t really show installing all of the piping/ducting since it was a lot of boring head scratching, cursing and redoing things over and over again, hence why it took so long to produce this video (also it’s a busy time of year for everyone, including me).
I didn’t really go into any depth for the automation aspect in this video, but I hope to be releasing that one soon with a bunch of information regarding signals, controls, programming and logic controllers.
Follow me on insta: / scottydwalsh
All music by Corbyn Kites: / @corbynkites8006
blast gates for pvc pipe
US & CANADIAN AFFILIATE LINKS:
DOWELMAX:
DOWELMAX 3/8" Kit:
www.dowelmax.com/product/clas...
DOWELMAX 1/2" Expansion:
www.dowelmax.com/product/dowe...
BLADES:
Table Saw Blade: lddy.no/1gj1k
Miter Saw Blade: lddy.no/1i8tz
Dado Stack: lddy.no/1g6ux
TOOLS:
Chisels: lddy.no/1g68v
Miter Gauge: geni.us/0K4H36
Dust Extractor: geni.us/ccOkLC
Drill and Driver: geni.us/qyrTiC
Circular Saw: geni.us/J5mDQ
Random Orbit Sander: geni.us/dkULx8s
Jig Saw: geni.us/i7HRN
Compact Router: geni.us/h90weiY
Cordless Router: geni.us/Jou0
Miter Saw: geni.us/uhfOe
Track Saw: geni.us/aslB
BITS:
Forstner Bits: geni.us/oj2HXU
Countersink With Stop: geni.us/cQFDp
Countersink w/o Stop: geni.us/dMiEM
Countersink Zero Flute: geni.us/fVIhcp
Self-Centering Bits: geni.us/RXZv9K3
3/32" Round Over Bit: geni.us/b8sGMT
SUPPLIES
Sandpaper: lddy.no/1hs32
Double-Sided Tape: geni.us/ZohrzD
Green Tape: geni.us/CWZquR
Glue: geni.us/4JCcR
CA Glue: geni.us/mELd05A
CA Accelerator: geni.us/bq0Az2
Silicone Glue Brush: geni.us/tiJw
INSTAGRAM:
/ scottydwalsh
MUSIC:
Epidemic Sound
Use my referral link and start your free 30-day trial:
www.epidemicsound.com/referra...

Хобби

Опубликовано:

23 дек 2020

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 40

@danmarkdiza1826 3 года назад

Cinematography improves every video. Good job Scott!

@ScottWalshWoodworking 3 года назад

Thanks for watching Dan! It's nice to pickup a camera again after so many years!

@alvincanbeawsome 3 года назад

Great Video! Good for you making it yourself. Happy Holidays!

@ScottWalshWoodworking 3 года назад

Thanks Alvin! Happy holidays!

@Critter145 2 года назад

“Every work of design is also a work of Art” -Me; Just Now.

@frankpratt529 3 года назад

Nicely done video. Your's are among the better woodworking videos & I do hope you keep putting them out. Thanks for posting.

@ScottWalshWoodworking 3 года назад

Thanks so much Frank! That's a really nice thing to say! I'm enjoying making videos thus far, so I'll continue making them as long as it stays fun. Unfortunately I don't have the shop time to make them as frequently as other RU-vidrs, but I do what I can.

@felixreali7101 3 года назад

great content, great delivery, nicely explained with handy on-screen visuals for the parts you're building. keep 'em coming :-)

@ScottWalshWoodworking 3 года назад

Thanks so much for the encouragement!

@rorybrown4987 3 года назад

Great video!

@ScottWalshWoodworking 3 года назад

Thanks for watching Rory!

@mp180170 3 года назад

Can’t wait to see what type of motors you used 👌🏼

@ScottWalshWoodworking 3 года назад

Thanks for watching Mark! I'm most likely going to be using high torque servo motors. Smaller servo motors may work as well, but I'd rather use something with more power so I don't run into any potential issues.

@befmx31 3 года назад

@@ScottWalshWoodworking Are you planning on a video showing the application of the servo motors?

@ScottWalshWoodworking 3 года назад

@@befmx31 yep! I can't guarantee when it'll be out, perhaps sometime this year 🤷‍♂️? Thanks for watching!

@rachelsalsberg5011 3 года назад

A+ cinematography! The added visuals are also super helpful. Great job!!

@ScottWalshWoodworking 3 года назад

Thank YOU!

@mcremona 3 года назад

Those handtool skills tho

@ScottWalshWoodworking 3 года назад

I always aim to impress

@glenmcarroll 8 месяцев назад

Looking good. Where are the electric motors?

@rhettdunn8788 3 года назад

I wouldn’t normally subscribe with so few videos out, but I can see you’re gonna grow this fast. Great video. Keep up the good work. And thanks for inspiration for my own blast gate dilemma I was having. Won’t be the same design but the concept inspired the solution.

@ScottWalshWoodworking 3 года назад

Thanks so much Rhett! That means a lot. I've had a busy January, but I should have some new content coming soon!

@davemarciniak8014 2 года назад

Great design, and you're so comfortable on camera that it's easy to focus on the project. Subscribed and looking forward to exploring your channel.

@skicr8zguy 2 года назад

Great idea for simple automated blast gate design. Rotating instead of sliding gates makes a lot of sense.

@BlakePizzey 3 года назад

Do you have actuators on the blast gates yet?? Curious how that went.

@ScottWalshWoodworking 3 года назад

Not yet, the video is in the pipeline, but I have a few more things to get done first. I don't think it'll be too much longer... I hope not. I'm inherently lazy and I sometimes don't take the time to switch on the DC. I really need this lol

@terryreed1421 Год назад

I can't believe that you were cutting and routing mdf AND NOT WEARING A MASK! Other than that it was a very good video.

@brianjordison2910 Год назад

Good Morning Scott. Thank you for such great work. I downloaded you PDF on the blast gate design and it did not open. I can not find where I downloaded it from........Can you please direct me to that download?

@ScottWalshWoodworking Год назад

Hi Brian, send me an email to scottwalshmedia@gmail.com and i'll send it to you

@robertsanderford2643 Год назад

Hey Scott,unable to find a set of plans for the blast gates.could you send me a copy of the drawings.very much appreciated.rob

@ScottWalshWoodworking Год назад

if you go to my 'about' section on my channel page, you can shoot me an email and I'll send them over

@Wordsnwood 3 года назад

Are you standing on a stepstool at @10:50 or did you just make yourself a head-banging hazard? But then seeing you work at @4:34 maybe you're just used to that? Hmmm

@ScottWalshWoodworking 3 года назад

I'm a little tall, and my basement shop has generally low ceilings and bulkheads. I think I'm also sitting on my bench @10:50, but I don't think it'll be a problem. I could use a good hit in the head every once in a while.

@cackleberryfarm4598 Год назад

Where's the motor?

@jon_craftingo.o4686 2 года назад

What happened to the servos?

@ScottWalshWoodworking 2 года назад

Check out my latest video and see!

@alvestermilleriii8807 Год назад

DON'T PUT anyone ON BLAST... not even yourself. SERIOUSLY. (HIP HOP & REGGAE) __ The Wild Greenberry ArtHouse TWGA 🤠💯🦈

@robertsanderford2643 11 месяцев назад

YOU KNOW AT FIRST I LIKED THE DUST SHOOT SYSTEM.BUT THEN I GOT TO BUILDING IT.NOTHING WORKS OUT CORRECT,EVEN AFTER A FEW SDJUSTMENTS,NOTHING WENT AS THIS PERSON SAYS.TOTALY ABANDED THIS FOOLS SYSTEM, FOR SOMETHING THAT I KNOW THAT WORKS. BUT I CAN ONLY SAY I HOPE THAT HIS CHANNEL DOESN’T MAKE THE CUT.