DIY Dining Chairs - How I built and upholstered my own Dining Chairs | DIY style

Подписаться 299

Просмотров 24 тыс.

50% 1

No Woodworking Experience? No Upholstering Experience? No Worries!
DIY Dining Chairs.
Hi everyone, just showing you how I built and upholstered these dining chairs by myself without woodworking and upholstering experience. I made 8 dining chairs in total for my dining table. This was a totally doable DIY project which I spent many weekends doing. I hope you enjoy this video and be inspired to build your own.
Please remember to Like, share, comment and subscribe to my channel.
0:00 Intro
0:23 Making cuts for the legs
2:10 Making chair frame
7:52 Install chair back
10:00 Start of Upholstering - Install edge profile
10:48 Diamond design and foam installation
14:10 Install chair back fabric
20:00 Install back tacking strip
20:45 Install back foam and fabric
25:05 Upholster and install chair seat
30:10 Upholster and install chair seat - finish touches
- - - - - Music Credits- - - - - - - - - - - - - - - - - -- -- - -- - - - - - - - - - - - - - - - -- - -- - -
Run Me Mixtape | Royalty Free Music | No Copyright | Afrobeat Music | Free Afrobeat Instrumental • Run Me Mixtape | Afrob... Creative Commons - Attribution - CC BY-NC-ND 4.0 Affiliated RU-vid channel | / kaseembada
-------------------------------------------------

Опубликовано:

18 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 30

@ProsperNcube-i5i 8 месяцев назад

You are a genius fam,i thought you have been doing this for years

@jaylartey4026 2 года назад

I'm really inspired

@BoredParacord Год назад

Just spent 40 minutes on the toilet watching someone building a fine looking chair. What am I doing with my life?

@jemimahmumbua6688 10 месяцев назад

You have just popped on it

@jaylartey4026 2 года назад

wooow... keep up the good work 👍

@qalas7327 Год назад

Great stuff

@robbinjohnson6082 2 года назад

Awesome job! 🙏🏽

@keithkwakye1419 2 года назад

Keep up the great work man 🙏 🤩

@cynthiadarkwa3013 2 года назад

Nice work bro

@calinkal 2 года назад

Very good, just go to ikea next time 🤣👏

@doablediy265 2 года назад

Ikea does have some good stuff but I like the satisfaction of making my own 😀

@TatendaProsperousChiware 2 месяца назад

Hie bro what's up, I really like your job where are you located

@taunajabrown405 11 месяцев назад

I love it! Have you come up with a template? Or measurements for the chairs? I would definitely pay for the plans

@doablediy265 11 месяцев назад

Hi, I will do another video soon on the frame build only. I will provide measurement details. Thanks

@mugenyijovansrela2619 Год назад

Hi am from uganda I really liked the way you made that just that it's a bit different from our style of carpentry ours is a bit complicated but you really perfected it for a beginner as you said in one of your comments.Damn nice work🤟🤟🤝🏿🤝🏿

@crazybeat8000 Месяц назад

Can you share drawings for the chair?🙏

@TheBahamian1 2 года назад

Excellent job my brother! Do you have a template and how many working hours did it take to make one chair. Thank you.

@doablediy265 2 года назад

Hi, I didn't really time myself making the dining chairs. But I would probably say 3 - 5 days per chair once I figured out what to do. I am not a carpenter or upholsterer. This is the 1st time making a chair and I watched many videos to give me ideas and tips especially for the upholstery. This was a trial and error project as I made everything from scratch. I currently do not have a template for the chairs. I will work on one in the future. Thanks

@unaispt4562 Год назад

Super brother and excellent job 👍, i am from india would you like metion the material using for this chair pls pls pls...... I hope an positive result... Pls

@desconocido8840 2 года назад

Nice build, quick question though, around the 10:00 minute mark it shows some kind of connection on the back rest, it's also shown at the 12:00 minute mark. Looks like you edited that out or didn't film it. What is that? Also, do you have a link for the strapping roll you used for the seat bottoms? Great job overall, these look nice.

@doablediy265 2 года назад

Thanks for your comment. What you are referring to at 10:00 and 12:00 minute mark is jute webbing. I stapled jute webbing around the edges to form the edge shape. The seat straps is Elastic webbing (seat grade). You can search online. I can send you the link but I am in Australia and I don't know where you are so the link may not be relevant. You should be able to search for the jute and elastic webbing online.

@khanmuzafar1093 Год назад

👍👌🏽👍👌🏽

@ericawilliams18 2 года назад

Awesome ! Do you sell the templates ? If so can you lmk how to purchase

@doablediy265 2 года назад

Hi, I currently do not have templates. I am working on it and will get back to you later.

@ericawilliams18 2 года назад

@@doablediy265 thanks ! Soon please !

@FurkanDemir-rj7uc 2 года назад

Hi from Turkey! I liked your job but I think you can change the music and you can write short explanations on the video. It seems really hard to make a chair. So if you want to continue with youtube, you can make DIY videos that people can make it in their homes. Also if you speak and make your videos shorter I think your channel will grove up. Wish to see your other jobs.

@doablediy265 2 года назад

Thanks for your feedback.