DIY Dremel CNC #3 electronics, software and firmware (Arduino, aluminium profiles, 3D printed parts)

Подписаться 143 тыс.

Просмотров 416 тыс.

50% 1

Time to add Arduino and some other electronic components to the DIY Dremel CNC machine! We will also upload code to the Arduino (GRBL) and take a look at software to control your machine (GRBL controller and CNCjs). At the end, we will run the first tests on the machine to see how it works :)
Dremel CNC parts list: bit.ly/2Hmlbcw
Support my projects on Patreon → / nikodembartnik
Or through PayPal: www.paypal.me/...
Watch the previous parts:
First part: • DIY Dremel CNC #1 desi...
Second part: • DIY Dremel CNC #2 fram...
Everything CNC related: • DIY Dremel CNC #1 desi...
I am extremely happy with how this machine works! It's super quiet and works extremely smoothly. Construction is very rigid and 3D-printed parts are okay. The first drawings are also great all lines are sharp and the dimensions are good.
What we will need, the amount in ():
-Dremel tool: amzn.to/3Fyzmsb
-Aluminum Profiles 20x20x600mm (5): amzn.to/3FGlH2d
-12mm rod (about 2 meters): amzn.to/45TJ0Aq
-500mm long trapezoidal lead screw 8mm (2): amzn.to/49eINdV
-300mm long trapezoidal lead screw 8mm (2): amzn.to/49eINdV
-12mm linear bearing (12): amzn.to/493uqZU
-5 to 8mm coupler (5): amzn.to/3FCQptj
-T nut (50): amzn.to/40eb3JG
-Screws: amzn.to/3s8wnnc
-Arduino+CNC shield+stepper drivers: amzn.to/3Sl2tXB
-Power supply: amzn.to/499eOUN
-Stepper motors (4): amzn.to/49eODfB
Here are some of the tools:
-3D printer: amzn.to/49aAD6i
-Thread tap: amzn.to/45T36L4
-Cordless drill: amzn.to/45PtWDK
STL files: www.thingivers...
GRBL: github.com/grb...
CNCjs: cnc.js.org/
GRBL Controller: zapmaker.org/p...
I always wanted to have one of those fancy CNC machines that can mill metals. It's cool and it gives you so many possibilities for your next projects! I already have a few ideas for projects with a CNC machine :)

Опубликовано:

21 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 305

@nikodembartnik 4 года назад

Support my projects on Patreon → www.patreon.com/nikodembartnik

@joetke 6 лет назад

This device is not only beautiful but it does the job awesomely! Your videos gain in quality and substance Nikodem! That represents a big amount of work and time summed up in less than 8 minutes, a real achievement and an achievement. Can't wait the first test with the dremel. Thanks for sharing all!

@nikodembartnik 6 лет назад

Thanks for another positive comment! Really appreciate every good word about my projects!

@joetke 6 лет назад

Glad that you fix the wobble. This project is really among the awesome ones about building a CNC from scratch. Bet that a lot of people will build your device.

@nikodembartnik 6 лет назад

I wish that :)

@ernestoferrandis399 6 лет назад

Congratulations for your work! I was just surfing the net and discovered your youtube channel on thingverse, and I have to admit that I'm really impressed with what you have achived (the CNC milling machine, your channel and the rest of your videos, which I'm anxious to watch). Carry on with your projects and thank you for sharing them with us! Greetings from Argentina!

@nikodembartnik 6 лет назад

Thank you very much!!! Greetings from Poland :)

@williamtate6268 5 лет назад

If some plastic parts crack when you drill them I have solution. Instead of chucking a bit in a drill hold bit with vice-grips and heat tip with torch till glowing and push through . I ran an Elumatic cnc at work a few years ago and always wanted one since . I appreciate your video.

@joerecio7647 5 лет назад

Thank you for all your videos, very well done! My grandson and I are learning as well as enjoying our times together.

@nikodembartnik 5 лет назад

Thank you! I am happy that you like my videos!

@DennisMurphey 10 месяцев назад

I ordered the 10A Power Supply because my dremel is powered on it own AC cord and I did not think I needed 20A to run the three Axis, Did i mess up or will 10 A run the three motors. I am powering one Z, One X and One Y (not 2 Y). Appreciate your input. I posted My adaptor for this Dremel Drill Press conversion to CNC, I know its light weight but my work is small light metal model trains, Thank You, Dennis Update Nov 27 2023 I have completed the conversion of my Dremel Drill Press with Micro Mark Mini X Y Table into a version of your DIY CNC Mini Milling Machine. So far I used the Dremel Carriage with a unique Adaptor to the Dremel Drill Press Stand. All your recommended Digital stuff. I have only the Z axis operational and yesterday I machined a test part to verify the manual job of Z would work with manual operation of the X Y Tables. It was evident I need to continue to convert the mini XY table to CNC ASAP. I have ordered the Couplers and the CNC Shield of course has the Sockets and I also have the required A4988 drivers. I want to share the CNC Shield is a marvelous tool for us. Spindle control is a little messy but boy does this Shield Save a Bunch of time. I was so happy to see the Stepper motor take on in my first test. Now we are thinking about a load unload robot and some other tools we can use on our train layout. Thank You So much young man. Dennis in Virginia

@jimmy2drinks 6 лет назад

Thanks very much for sharing this Nikodem. I plan to suggest this as a project to mechanical and electrical engineering students at the college where I work.

@nikodembartnik 6 лет назад

Cool! Thanks for the positive feedback, remember to credit my work! It's nice when your project is recommended to college students when I am still in high school :)

@chbonnici 6 лет назад

First class project. Good of you to share. Well done. Keep it up. You are inspiration to others. Many thanks

@nikodembartnik 6 лет назад

Thank you :)

@sttm1283 5 лет назад

"if there is no smoke it should be fine" haha thats a good rule

@xxportalxx. 5 лет назад

Electrical engineering 101: keeping the smoke INSIDE the electronics.

@forgotrafe 6 лет назад

Great work. Look forward to seeing Dremmel in action.

@nikodembartnik 6 лет назад

Thanks! Yessss, me too :D

@doctorohmed 4 года назад

I appreciate your dedication of the CNC router

@haydenc2742 6 лет назад

Awesome! Getting closer to cutting some stuff...very cool! Never heard of cnc.js, man that looks really nice...and it runs on RPi..nice!

@nikodembartnik 6 лет назад

it's great piece of software

@joetke 6 лет назад

agree

@SkyscrapersConstructionSerbia 3 месяца назад

I have a problem, one of my cnc shields is smoking. I took a 12v 10a power supply and 1.9 amp motors.

@iconjohn82 6 лет назад

This is amazing the way the video made was very informative and properly edited since view angle of camera is one of the best diy tutorial i've seen. Keep it up buddy and let me know your next project...looking forward for DIY laser cutter of engraver with 3d printer all in one if possible. More power!!!

@nikodembartnik 6 лет назад

Thanks! I am happy that you like my project!

@amigodesigns 6 лет назад

Great job, I would love to see a bigger one for a future project!

@nikodembartnik 6 лет назад

I would love to see it, but firstly I have to find some workspace bigger than my 7 square meter bedroom :) I already started learning to weld to build stronger machines!

@FF_AlohaEdition 2 года назад

FYI the esteps need fixing. I ran my cnc for 100mm but measured the distance at double. so $100=400 might not be the setting for everyone. Update: my $100=24.5, $101=24.5, $102=25, This is an approximation. And I made it run very slowly ($110, $111, $112 = 1) because my cnc would actually stall out when going very fast. Forget about putting on limit switch normal closed because it need a filtering capacitor. Also if using a power plug socket with fuse use a 1.5a. Granted I might not have bought the same spindle as other youtubers reviewers stated max wattage is 50watt and another 80 watt.

@maroujee2984 6 лет назад

Masz lepszy angielski niż większość polaków mieszkających w krajach anglojęzycznych. Szacunek.

@nikodembartnik 6 лет назад

Większość zawsze hejtuje, miła odmiana :) Dzięki!

@davidwhitt3299 6 лет назад

Can't wait for next video

@nikodembartnik 6 лет назад

Me too!

@Mateusz_AstroLife 6 лет назад

Szanuję :)

@nikodembartnik 6 лет назад

Dziękuję :)

@nestorangeles3107 6 лет назад

How it is done to be 1

@Dan-qp1el 3 года назад

YOUNG MAN, WELL DONE.

@jasdall 6 лет назад

Dear Nik really well done. Great job. Just subscribed to your profile. Though I can’t understand how and where to install the end stops. I’ve seen the 3 of your video clips but cannot locate or find where you mentioned the end stops. Anyway very well done. Most probably will start printing the parts until I wait for the other parts.

@stephenyonkoski9712 6 лет назад

Thank you for showing. I invented something and I'm thinking about takking course on on 3D printing and on how it works and the materials possible that you can use with it. My invention is all plastic and if I master that then I get one step closer to creatting a new product, many hurdlles or like patens to keep any budy from stealing my design and concept. It is q family oreint product. Long process I been working on since 2007. I have put it on back burner for some time now. It makes me nerves for I know it is a big task to acomplish, but as my mother saids nothing worth have never comes easy. have a blessed day 😎 and thanks again.

@Odonnol 2 года назад

Excellent video shooting and editing skills! Respect.

@SOUZAELS 3 года назад

hello my friend, nice video that you made, i made my self a arduino cnc router, and your instruction helped me a lot, thanks and a big hug from BRAZIL

@lucascampos4289 Год назад

Opa, um Brasileiro! Estou fazendo o meu também seguindo esse projeto ... Achei o projeto no thingiverse e já comprei quase tudo ... Falta só o motor e a fonte basicamente, mas irei começar a montar a base primeiro. Uma pergunta, você usou fim de curso ? Como posso definir a posição inicial sem o fim de curso se for o caso ?

@erikksagala2423 6 лет назад

This is what I'm waiting for, greetings from Indonesia

@nikodembartnik 6 лет назад

Greetings from Poland!

@SarycanPL 5 лет назад

nie ukrywam, że z chęcią bym taką frezarkę odkupił :)

@한재욱-x5h 3 года назад

Oh nice work!! How did you connect the line? Can you explain it more exactly to me? 5:28

@evertonbarreto6651 6 лет назад

Thanks for share your work. Congratulations!

@nikodembartnik 6 лет назад

Thank you :)

@das250250 6 лет назад

For aluminium I wondered why you didn't use dual 12mm guides for X axis ,long axis , just to keep it stiff. If it can cut aluminium it would be worth cutting and replacing the 3d printed parts even if you have to layer the parts out of thinner aluminium sheet and screw them together with screws to make one solid unit . I'm not sure if you could ten braze the sheets with special low temp rods and a gas torch . Even if this process is slow it will offer a more rigid design possibly stiff enough to make small brackets and assemblies. Speed may need to be slower to reduce the stresses but it is a budget machine after all. I was contemplating designing 3d moulds to make a similar system partially from cement parts in order to stiffen the machine but this might entail stronger machines or gearing.

@arturofuentesgarcia6882 5 лет назад

Hi! Good project. If you think use it like milling machine for a different hard material, you should replace the flexible couplings for a rigid ones. anyway that's a great.

@nikodembartnik 5 лет назад

I already did that in my next videos :) I just 3D printed them

@johnstavrakis7412 4 года назад

Grate job Thanks You. From Greece with love. Keep working.

@Павел2акк 4 месяца назад

Хорошая работа. Спасибо за модели

@ahmedtouma8231 5 лет назад

I'm using a4988 red one for nema 17 1.7A how can i adjust theme ? I do not have any knowledge of electronics.

@wpavelski 4 года назад

Nice project. Hugs from Brazil.

@stevenalex9439 6 лет назад

Thanks for the video and your work!

@nikodembartnik 6 лет назад

Thanks for the comment!

@victorsi1992 5 лет назад

Вітаю, дуже гарна ідея. Я взяв собі до уваги ваші намагання покращення. Дякую

@sanjivnasik 2 года назад

I have built the machine but my Z axis just vibrates. I have changed the Stepper motor driver and cnc shield by issue remains unresoved

@gitaramaker101 5 лет назад

Hi Nikodem, great vid! What is the exact power supply settings you use for the stepper drivers? Power supply is 12v 30a how low have you reduced the ampere?

@ihave200ksubscriber6 3 года назад

Am building my own CNC , using nikodem video . It's awesome 😍 . I want to know why did he put the jumper on all the CNC shield ? For X y z and A . Anyone?

@SumitDIY 3 года назад

Awesome work

@prodeous 6 лет назад

Like most, I"m eager to see this dremel through it's first board. Still based on the pen work, the lines seem a tad uneven, most likely due to the pen being loose so I expect dremel to produce more strait lines.

@nikodembartnik 6 лет назад

lines are not that bad, maybe on camera, it doesn't look so good.

@art48 5 лет назад

I have finished with the physical DIY CNC machine and now I am trying to hook up the electronics. I have been trying for over a week and am getting frustrated. I have an Arduino Uno with a CNC shield and this is connected to my computer. I have downloaded Grbl to the arduino and that went well. I am using Universal Gcode Sender and when I bring it up on the computer, I checked that it has the same port as the Arduino. I downloaded a simple Easel project, and generated Gcode. I know the Gcode is good, since it came from an Easel project. When I bring up the UGS window, and then open the connection, everything is fine. But when I upload the Gcode from the Easel file the UGS, I get a message that the 'machine status' is disconnected. I do have the 4 cables from the stepper motors plugged into the CNC shield, but still get the error message that the status is disconnected. Could I have a bad CNC shield? Is there a way of testing the CNC shield? Any help?

@stephaniegarnicatrujillo3895 5 лет назад

Hi, thanks for sharing such a nice project! I know this design is intended for dremel cutting purposes, but i would like to use your design for drawing just like you did in this video for testing, if so, is there any way I could increase the speed, so the pen would move faster? If yes, where I can do this change?

@nikodembartnik 5 лет назад

Sure you just have to change this in grbl settings

@oteeceaserokae 2 года назад

if you increase the speed it might affect the pen and may not write properly if the pen aint ok

@Perspectologist 6 лет назад

Looking good. I’m looking forward to seeing it cut. I should look into that software you mentioned. I’ve only use Easel with my X-Carve. It works OK, but it is nice to have multiple options. I don’t entirely love the web based dependency of Easel.

@nikodembartnik 6 лет назад

CNCjs looks awesome, I am not sure how it will work with X-Carve, Easel can be better because it's made just for this machine. But maybe you will find it work better for you. That's true, sometimes web based is not the best solution.

@alanalvarez7811 6 лет назад

Amazing...keep up the great work :)

@nikodembartnik 6 лет назад

Thanks!

@michelbonnet3787 6 лет назад

Hi ! And thanks for your project that I'm on the way to build. Just a question : It seems that the slots for Arduino on the printed plate are just inverted. You don't have a corrected version ? Regards.

@sebastianszolc8606 2 года назад

Cześć, fajnie że mamy takich lub przyszłych kreatywnych inżynierów. Nikodem dwa pytania? Jakie dokladnie silniki krokowe użyłeś? A drugie to masz dwg? Wymiary platformy roboczej z tej sklejki?. Nie znalazlem w żadnym z Twoich udostępnionych plików. POLISH POWER. ! PROJEKT SWIETNY.

@polarfactory 6 лет назад

That's really great man

@nikodembartnik 6 лет назад

Thanks man!

@ambroribo6079 5 лет назад

very good project and description. I will like to know if there is a possibility to by the printed parts since I do not have the capability to do that. Where and how much do they cost just to have an idea for the whole project. Thanks for helping. Bye

@mkexotics1 3 года назад

Awesome! Thank you, thank you, thank you!

@mememaster147 6 лет назад

Have you checked the concentricity of the spindle and chuck on the Dremel? I've had one where they were misaligned so that the tool axis was at an angle to the axis that the spindle was rotating on. Proxxon tools have much better spindle concentricity and alignment but they're twice as expensive.

@JordanMiller1117 6 лет назад

What size bearings did you use for the end opposite the motors for the lead screws? I didn't see it in the description so I'm just curious. Also, what gauge wire were you using from the PSU to the CNC shield?

@nikodembartnik 6 лет назад

that's 608 bearing popular in skateboards

@sgicorporation7161 4 года назад

Grate job Thanks a lot Keep uploading.. Keep educating.. Keep growing.....

@ericnickel3280 2 года назад

How do you connect dremel to the board and power supply? I don't see instruction in vid #4

@crystalmediavisual 6 лет назад

Nice machine. Good work

@nikodembartnik 6 лет назад

Thanks!

@joetke 6 лет назад

I'm impatient to see your first acrylic output.

@nikodembartnik 6 лет назад

I am just looking on the internet to buy some acrylic :)

@joetke 6 лет назад

I need to build acrylic boxes for my RPi projects. It's way classier than the best balsa wood ;)

@dizer. 6 лет назад

Круто! Ждём реальных тестов)

@nikodembartnik 6 лет назад

Subscribe to don't miss them!

@stefanoguitarplayer 6 лет назад

Bravo ottimo lavoro, pulito e funzionale

@nikodembartnik 6 лет назад

grazie!

@joelsanchezmartinez294 5 лет назад

Like for the video and for the music. Thanks for sharing

@nikodembartnik 5 лет назад

Thanks!

@DushyantSingh-dt 4 года назад

Hey i want to make a cnc number printing plotter machine, problem is that, when i want to print a number using stepper motors then i upload my Gerber file when it works, but when i want to change my printing number then again go to pc, and chnage the Gerber file then upload, my work is not so great, i just want to print some numbers using stepper motors. so Arundio IDE have any library to without using Gerber i change my number from keypad and display. This is my collage project, please RU-vid help me,

@Guilherme-uu8ql 5 лет назад

Nikodem, 12V and 5A is enought to power supply this cnc? I saw you used 12V 30A. Tks

@nikodembartnik 5 лет назад

Sure, check out video number 5 of this series I replaced this big power supply with something way smaller that works too

@coreyhastings454 6 лет назад

I have been looking at the Arduino kit you linked, and I noticed that it specifically says there are X, Y, Z, and A axes, so I assume you are using the A axis as a second Y axis. Do you know if that will also work for making the A axis a second Z axis? I ask because I have a dead 3D printer (control board fried) that I want to repurpose as a CNC, and if I can prevent having to buy anything except the control board, that would be awesome! :) Thanks!

@nikodembartnik 6 лет назад

Yes, there are some connectors on the side, you can mirror one of the axes (X, Y or Z) to the A axis. I talked about that in this video. It could work fine as for the control board because a frame of the 3D printer is not super rigid so keep that in mind.

@coreyhastings454 6 лет назад

Ahh. I thought you were only talking about the Y axis, as most other boards specifically have a Y1 and Y2. Thanks for the quick reply! Agreed, most frames are not super rigid, however I had implemented a Z-axis mod on mine that make it ridiculously rigid haha. I am looking forward to trying this out!! Thanks again! :)

@rpm-zr4fh 4 года назад

I know that this video is a little old now, did you ever get an error when putting the code onto your arduino? Like the file was too big?

@Puddertoget 6 лет назад

Awesome build Nikodem! I am very much considering to build it myself. Have you tested it with the dremel yet?

@nikodembartnik 6 лет назад

Thanks! Not yet, I have to buy some more bearings to make it more rigid

@Mpourazos 6 лет назад

bro! here in Greece i wanted to make one and for the 3d printed parts to be printed they want 250 euros !! so i better go for the 3d printer first

@nikodembartnik 6 лет назад

Yes, 3D printing services are really expensive and 3D printers are not nowadays, check out some of my videos about 3D printers (Cr10, JGAurora)! If you want I can also recommend you some other machines :)

@Mpourazos 6 лет назад

well the cr10 is the way to go (already a fun on the Facebook page) JGAurora does not ship in Greece most of the products but i am not ready to spend 400 euro minimum for the my first 3d printer a was looking for the Creality3D Ender

@nikodembartnik 6 лет назад

Based on what I know Ender 3 is also a good choice but I had never used this printer

@VintageTechRepairs 5 лет назад

@@nikodembartnik100% agreed. I love mine

@garfieldakos 5 лет назад

Niko , i am from Greece too, and these days i m building myself this CNC machine, if you want i can print these parts for you with a much lower price ( with 300 euros i can give you a ready made machine including everything! lol)

@ErtsenPlayGames 6 лет назад

Fajny projekt i dobra robota wszystko prosto i tak jak byc powinno. Jedyne co bym zmienil to wywalil sprzegla których uzyles na silnikach bo one dzialaja jak sprezyny i beda duze odchyly zamiast tego dal bym sprzegla jakie ewentualnie uzywa sie w cnc czyli sprzegla klowe (ale ze one sa dosyc drogie a raczej nie masz odchylow to polaczyl srube bezposrednio do osi silnika kawalkiem rurki metalowej / walka rozwierconego z 1 na silnik a z 2 na srube lub dosunal os do sruby i polaczyl calosc bardzo sztywnym wezykiem ze zbrojeniem czy nawet wydrukowal lacznik sztywny samocentrujacy z thingiverse)

@nikodembartnik 6 лет назад

Dzięki! Tak, nie jest to najlepsze rozwiązanie, ale jest tanie i łatwo dostępne. Prawdopodobnie wymienię to za jakiś czas

@jed2055 Год назад

@@nikodembartnik Has this been corrected in the latest version available to us? Also, v3.6 of grbl controller has been out for 6 years. Where did you find v3.0 I saw on your video?

@JuanSanchez-rb4qu 6 лет назад

Great design Nikodem, though is it scallable? like just use longer aluminum parts right?

@nikodembartnik 6 лет назад

Thanks! Yes it is, longer rods, lead screws and profiles. 3D printed parts are the same

@wolfvierbergen1417 5 лет назад

It is very scalable but the bigger you go you may lose precision and quality. If you continue working with threaded rods, whipping may start to be a problem, this is because no rod is totally straight. An advise for longer linear motion are gear racks, check this link out: www.cncrouterparts.com/standard-rack-and-pinion-parts-c-46_39.html But then Nikodem's 3d printed parts are no longer useful, begin with something small, like he did.

@joetke 6 лет назад

Just a point about security: High voltages are less dangerous than high currents. Too much Amps might kill you.

@nikodembartnik 6 лет назад

that's true but you need high voltage in order to have high amps because our skin has high resistance.

@joetke 6 лет назад

Totally agree

@nirgore100 5 лет назад

What is the KEYES 5V Relay Module for? and why you don't use it?

@daylightnight7129 5 лет назад

i think it is prepared for swithing drill machine

@armatonix 6 лет назад

Wygląda na to że za niedługo obok drukarki 3D stanie cnc xD I to wszystko przec Ciebie xd

@nikodembartnik 6 лет назад

No i fajnie :) przepraszam :)

@yurialtunin9121 6 лет назад

Dlaczego panu nie mówisz po angielsku?

@nikodembartnik 6 лет назад

Because I can also speak polish :)

@wahidshirdel1119 3 года назад

Hi whats up? i was woundering about how microcontroler(arduino ) undrestand g-code which sent to it from pc . For example when i press the top arrow of my keybord in computer it goes one step toward and vice versa

@PlayZilla.Studio 6 лет назад

So where's the final result, is it able to drawings only?

@tvideo1189 6 лет назад

Will this mill in 3d or is it 2.5d? Can't tell from the tests you show. Thanks.

@xKatjaxPurrsx 5 лет назад

Universal Gcode Sender works too.

@nikodembartnik 5 лет назад

That's true :)

@davecook2297 5 лет назад

Hello ! And thank you ! I'm looking for a power supply similar to the one in your video, but the link you have no longer works. Any recommendations ? Thanks !

@foxterfox7120 4 года назад

Could you please make a video similar to this, but, for a homemade 3d Printer using Marlin?

@rafaeldejulio5912 Год назад

Hi! how do you tell the software the build plate volume mine just keeps on hitting against the rails

@thomazzzzi 4 года назад

great great build. I want to build one and wonder if i can make one which has a longer Z axis. How do i do this?

@dharmeshsolanki4354 4 года назад

can i use grbl with arduino pro micro ? because that's the only one I have and have no use for it

@nikodembartnik 4 года назад

Yes, yes you can

@Electricworld-1 5 лет назад

Very good, thank you.

@Guilherme-uu8ql 6 лет назад

Thank you!

@nikodembartnik 6 лет назад

Thank YOU!

@yurialtunin9121 6 лет назад

Fantastic videos! I want to see it machining PCB. Did you try?

@nikodembartnik 6 лет назад

not yet

@dangdut.audiophile 3 года назад

how to set dimension x,y,z axis on firmware? are we can change dimension or expand it . thanks,,

@kentthomas1045 4 года назад

What parts are specifically for the Z axis? I'm looking to build just an X and Y axis model.

@rsz90182 3 года назад

The idea is to keep all of that white smoke inside the wires and boards. If you let it out then you have to replace them.

@Brazylizsek 5 лет назад

Was there really need for the second motor in the longest axis?

@spsmartfast9 10 месяцев назад

Congratulations for your work.where i can found the 3d parts? Thank you

@nikodembartnik 9 месяцев назад

In the description

@dakadaka7455 3 года назад

Would be possible to run NEMA 23 with your setup? Same drivers/arduino and everything else

@busterblader6610 6 лет назад

Nice project, really wanted to know how you're planning to put a dremel on it tho...

@nikodembartnik 6 лет назад

Check out my design in first video about this project

@nathanwijnands3 4 года назад

I did the exact same thing, but after letting my program run for about 2-3minutes the drivers with coolblox become extremely hot. What am I doing wrong?

@pavanpacharya9861 4 года назад

Where can i get the code? Please reply sir..

@johnbrevard5966 5 лет назад

My god are you and this Amazing!!...WoW...

@inf3953 5 лет назад

Can we use cpu PSU directly to this machine? I had bunch of em laying around.

@MementoNeli 6 лет назад

Hey Nikodem great job man! When can we expect another video?

@nikodembartnik 6 лет назад

I will be gone next week because of holidays. I think it will be ready next next week.

@MementoNeli 6 лет назад

Next next week! Im looking forward ;)

@andreadebiasi5617 6 лет назад

Hi, what infill % did you use for print the parts? And the layer height?

@barrymctrustery5715 5 лет назад

Hi Nik have you by any chance got a design for the printed part that is fixed to the power supply to hold the Arduino and other electronics . I am half way through building CNC i am going to try fixing Makita Palm router to cnc . Carry on with the designs