DIY Drill Press Table and Fence - Easy Shop Project

Подписаться 74 тыс.

Просмотров 148 тыс.

50% 1

This easy to make Drill Press Table is the perfect shop project. A drill press table and fence can be vital when needing to drill accurate and repeatable holes. The video includes free drill press table plans with a full cut list below. The sliding dovetail system is easier to install than t-tracks and when paired with the MICROJIG accessories this table is everything that you need!
Free Plans and Cut List Here: www.penaltyboxwoodshop.com/pl...
Apparel: Apparel: teespring.com/stores/penaltyb...\
List of tools used in this build:
Microjig Dovetail Pro Kit: amzn.to/2PAsPEv
Microjig Matchfit Dovetail Clamps: amzn.to/2MZQIFQ
Microjig Grr-ripper: amzn.to/2MM2svE
Microjig Pushblocks: amzn.to/2MKUmTV
Amana Tool Countersink Bit: amzn.to/2WAMJRt
Titebond Glue: amzn.to/2Wxp9F4
Bosch Drill: amzn.to/2oHCGh0
Makita Router: amzn.to/2N804xt
Delta Table Saw: amzn.to/2T5AKN5
Biesemeyer Table Saw Fence: amzn.to/2ZVVKZy
Delta Miter Saw: amzn.to/2N24Psw
Woodpeckers Router Table: amzn.to/31XbY1f
Canon T6i DSLR: amzn.to/2EgiiHx
Rode VideoMic Microphone: amzn.to/2ZY0hve
Canon EF 28-135mm f/3 Zoom Lens: amzn.to/2H1HaWw
Follow: https: ru-vid.com...
Instagram: / penaltyboxwoodshop
Website: www.penaltyboxwoodshop.com/
List of all my tools: www.penaltyboxwoodshop.com/tools
Video Tags:
how to make a drill press table,easy drill press table,diy drill press table and fence,drill press stand diy plans,drill press hacks youtube,easy to make drill press table,one day shop projects,drill press stop block,dovetail clamps,sliding dovetail joint,the perfect shop project,drill press hold down,penalty box woodshop,drill press safety upgrade,easy drill press upgrade,drill press safety,free drill press table plans,free shop project plans

Хобби

Опубликовано:

31 окт 2019

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 152

@PenaltyBoxWoodshop 4 года назад

What other shop projects would you use the dovetail system on instead of t-tracks?

@jeffthurston9835 4 года назад

I have built a big square with groves every 4 inches to hold boards together while I fasten with the Kreg jig along with a band saw re-saw sled.

@PenaltyBoxWoodshop 4 года назад

@@jeffthurston9835 Thats a great idea! I bet that a good way to keep everything from moving around and makes it a lot safer of a task!

@carlbrothers 4 года назад

My recent shop work table has dovetails in it as well as dog holes to allow me to clamp, and use the dovetails to hold stops when batching out various pieces when my track saw cutting station is set up.

@brianmi40 2 года назад

Dovetailing the front apron of your bench lets you use the clamps to hold a board vertical for tasks like planing. And one or two runs the length of your bench surface about 12" apart should let you clamp just about anything down quickly. That combination now lets you clamp two boards at right angles to screw them together. A person in seriously limited space without room for a bench or assembly table (think one car garage with needing to park the car there at night) can make a flexible clamping, gluing surface, maybe 3'x4', that mounts on a table saw quickly and just leans against the wall when not needed. This can also be a 2nd work surface for those that might make use of it on occasion, or for contractor types, transports easily to a job site. Also, if you have a track saw (I have a Shop Fox), you'll notice the Microjig metal clamps will work just fine in its slots, so that means you could take your nearly identical clamps that came with the track saw and set up a jig to grind them to 14 degrees, and now you have two extra clamps for way less then the $45 they sell theirs for.

@almagaw6070 2 года назад

could be a big help in securing my bending jigs, layout patterns and metal bender onto my work bench - I'm also plan on using the idea to improve the capability of my router

@jbmann52 2 года назад

I’ve reviewed many drill press table build videos and have said “ yeah, I’ll build this one” but never have. I’m glad I procrastinated because now I have found the ONE that I am going to build. Thank you!!

@PenaltyBoxWoodshop 2 года назад

Hahaha glad it was helpful!

@3x3CustomTamar 4 года назад

Love the off center sacrificial piece. So smart. 🤓

@PenaltyBoxWoodshop 4 года назад

+3x3Custom - Tamar Thank you, Tamar! I have seen that on a few other designs and thought it was an excellent idea.

@UppsalaSal 2 года назад

The detail about making the sacrificial piece off center…clever!

@PenaltyBoxWoodshop 2 года назад

Thanks!

@knowledge2100 3 года назад

Great idea, nice job providing the joining the Drill Press Table to the base. Thank you for the great idea. Adding it to my bucket list.

@PenaltyBoxWoodshop 3 года назад

Thanks for the support and I am glad it was helpful!

@jdc5941 3 года назад

Great video, you are a natural teacher, I learn something new with every video of yours that I watch.

@PenaltyBoxWoodshop 3 года назад

Thanks JD!👊👊👍

@almagaw6070 2 года назад

some of the most useful tips I've come across for the work I do in my small shop

@clickster1883 4 года назад

I just watched this video and immediately saved it for future reference/build as I get closer to beginning to put my garage shop together. Thanks for doing this and sharing the plans for it. You rock!

@PenaltyBoxWoodshop 4 года назад

Heck yea! Thanks brother! Let me know if you have any questions.

@timhalcomb4041 4 года назад

I think that's just an awesome build thanks for taking the time to share with us you have a blessed day

@PenaltyBoxWoodshop 4 года назад

Thank you, Tim! And thank you for taking a moment to leave such a kind comment.

@alsaffarstudios Год назад

Very useful video, this is great table and fence. Thanks for sharing your work with us 🙏🏼

@craigwood4653 2 года назад

Craig Wood. Just getting a good start as a wood worker preparing for retirement. The drill press table video was very helpful and will be my next project. The same is true for the no nail drawer.

@GarysOutdoors 4 года назад

Great video! Since I've gotten more into the MicroJig stuff recently, I was eyeballing my drill press table for some mod's. Thanks for the ideas!

@PenaltyBoxWoodshop 4 года назад

Thanks brother! I’ve put some hours of work on it since malign the video and I could not be happier with it. I love all the Microjig stuff!

@markfutato7547 4 года назад

I made a similar 1A while back but I like yours better. When I upgrade I will follow your plan. Thanks.

@PenaltyBoxWoodshop 4 года назад

+Mark Futato Awesome! Let me know if you have any questions or if you found any other methods or add one that work better

@The743837 2 года назад

Nice!!!! I'm gonna use it. Thanks

@PenaltyBoxWoodshop 2 года назад

Glad it was useful!!

@deldridg 2 года назад

Well presented and love the use of the MicroJig. Just about to purchase a set thanks to your excellent vid! No more T-tracks. Cheers mate from Aussie land - Dave

@wayneduncan5656 3 года назад

I think drill table shows a lot of creativity.

@PenaltyBoxWoodshop 3 года назад

Thank you, Wayne! I appreciate that.

@OldGuyWoodworks 4 года назад

So this is what you turned the clamp rack into. Good job. Great video.

@PenaltyBoxWoodshop 4 года назад

You got it! Thanks man!

@FredMcIntyre 4 года назад

Awesome work! 😃👌🏻👍🏻👊🏻

@PenaltyBoxWoodshop 4 года назад

Thanks Fred!!!!

@territodude Год назад

She's a beauty, thanks!

@sapelesteve 3 года назад

Very nicely done! I have seen a number of these builds on YT and yours is one of the better ones! 👍👍

@PenaltyBoxWoodshop 3 года назад

Thanks Steve! 👊👊👊

@RickNob 4 года назад

Nice work, enjoying the channel!

@PenaltyBoxWoodshop 4 года назад

Thanks Rick, I appreciate that!

@barryroberts6470 4 года назад

Great idea and build, well done. Barry (ENG)

@PenaltyBoxWoodshop 4 года назад

Thanks Barry, I appreciate that!

@carbonfe 4 года назад

Great design! Been looking at different ideas for a drill press system. Haven't seen anyone use the microjig dovetail system on a drill press table before. Kudos man!

@PenaltyBoxWoodshop 4 года назад

Thanks brother! I’m really happy with it and it’s working great!

@YUSince 2 года назад

Perfect 👍

@bhaygood7306 4 года назад

Thanks first one I keeping watching

@PenaltyBoxWoodshop 4 года назад

Good! Thank you!

@AngieWilliamsDesigns 2 года назад

I definitely need to build one of these.

@PenaltyBoxWoodshop 2 года назад

👊👊👊

@macdaddy5802 4 года назад

Very nice

@PenaltyBoxWoodshop 4 года назад

Thank you!! 👊👊👊

@FranksDIY 4 года назад

nice job

@PenaltyBoxWoodshop 4 года назад

Thanks man

@gregwest8412 2 года назад

Nice

@NinaTaristiana 4 года назад

Nice sharing bro,, success your channel,, from Indonesia💕👍😀

@PenaltyBoxWoodshop 4 года назад

Thanks friend!

@user-ti5df1jg7t 4 года назад

Замечательная идея!👍

@PenaltyBoxWoodshop 4 года назад

👊👊👊👊👊

@user-ti5df1jg7t 4 года назад

@@PenaltyBoxWoodshop ✊✊✊Привет из России,с уважением к твоему мастерству.

@sumandl 4 года назад

Nice!

@PenaltyBoxWoodshop 4 года назад

Thanks friend!

@MichaelJohnson-lx2dl 2 года назад

Very well done. A couple of issues I would run into is the height of the fence and the size of the sliding stop. I've been using a fence that is just an inch tall because I drill some things very close to the fence and anything higher interferes with the chuck. Also, I often need more room for my stop and have whittled mine down to maybe an inch and a half. Other than those two personal idiosyncrasies I think you gave us all a lot of great ideas.

@OneWhoWas 3 года назад

I really like the dovetail integration. That's a nice option from the standard t-track. Well done! I'm going to hunt up some of those clamps for myself. One item, although I'm sure you've considered it, and rules it out for some reason... A round sacraficial insert will give you full rotation for fresh surface. You can size it to your favorite hole saw size for cutting blanks, and if you craft it right, you can make it so you can rotate it without having to adjust your fence to access it. Fan of the channel, subscribing. 👍

@PenaltyBoxWoodshop 3 года назад

Thanks for the support! I’ve never seen a round insert and it may not be a bad idea as long as it doesn’t move while in place too much

@austinhavens3058 3 года назад

The round insert should work very well. In the printing business, (62 years), we used a paper drill to drill stacks of paper. It was a hard Wood piece with a counter sink screw in the center. That kept it stable and make it easy to rotate the exact distance needed. We purchased the inserts from a printing/bindery source in dozen pieces. They probably could be home made with a large hole saw drill.

@Katykat7777777 9 месяцев назад

This press has worked like a charm for my projects ru-vid.comUgkxajoEbapTfqWaadnqb04h6U576yxXp-FE . I didn't even secure it to my table top, mainly due to the fact that I was using a 15 lbs drill vise. It's not flimsy at all as to what others have claimed it to be. Make sure the locking nuts and levers are secured and there won't be any issues with light pressure and patience. I was able to drill through aluminum, plastic, and steel (steel took a while) with no problems at all. Yeah it took a little longer than a regular drill press, but I don't have the space OR the money for one.The instruction manual was worthless, but luckily assembling the press was intuitive. However, the manual would be good for ordering replacement parts if needed. There is a nice breakdown of the parts that are included in the kit. Before ordering, make sure it is compatible with your unit, it is clearly stated what models the press is compatible with.This was an excellent purchase for $40!!

@mitchyelvington4776 4 года назад

Yep!

@PenaltyBoxWoodshop 4 года назад

👊👊👍👍

@HoraceSmith-xf1nv 5 месяцев назад

The author does like to from scratch, ru-vid.comUgkxbnOKZBE4evMO5V2vroHeCjq6d_MV6wJO shaping and trimming wood from large blocks into fine finished products. As another reviewer mentioned, most projects require a lot of high-dollar equipment that most of us don’t have the room or budget for. But, knowing how to do these things, even if we won’t be able to practise the full stack project, is still great.

@ArtisanMade 4 года назад

I watched a bunch of your videos today. Love your work! I especially liked the progress that you have made with your video quality and editing. Great camera angles too! What kind of camera are you using?

@PenaltyBoxWoodshop 4 года назад

Thank so much for the support and kind words! I’m using the Cannon T6i. There are direct links to it in the description section of my videos if you want to check it out

@eighthave Год назад

I know this video has been up for a while in RU-vid time, but I used it to build a table for my drill press and it works great. I made a circle for the sacrificial piece and it has been fine, but if it was a little loose, you could put rubber cement on the bottom of the piece, let it dry and then put it in and it will have some grip, or make a little shim. My only advice otherwise is to consider how tall the clamps are, and make sure that the groove you make on the right side of the table won’t cause the clamp to interfere with the turning of the handles on the drill. I didn’t notice the first time I watched, but I may have to put a groove parallel to the fence that is close to the fence. I just realized that if you turn the clamp the other way around in that groove, the clamp itself can be the stop block, assuming you are using the fence and the second clamp is holding the piece down. Hm, will have to try that when I get home. I have a tiny workshop, it’s actually a bathroom rough-in, but I use those clamps to attach my router table to the end of my workbench (along with supports), but it can easily be taken down to save space. Anyway, all this is to say thanks for the inspiration!

@jeanle1er 4 года назад

Super! tu as un nouvel abonné! :)

@PenaltyBoxWoodshop 4 года назад

+jeanle1er thanks!!!!

@PenaltyBoxWoodshop 4 года назад

+jeanle1er 👊👊👊

@twotopsturning6493 4 года назад

The offset backer is a great idea, slightly larger for big forstner bits though maybe. However I feel t track is probably a better fit for this project, as you can rotate it side to side and have many approaches to clamping pieces, vs the straight on only of the dovetail clamp. Where I do think the dovetail clamp would kill it would be tapering jigs, allowing clamping closer to the blade. And possibly one off router templates?

@PenaltyBoxWoodshop 4 года назад

I definitely see what your saying about the t-track on this particular project. I have not ran into a issue with it not being versatile enough at this point but being able to swivel a clamp vs straight on would be a great addition. I use them on my tapering jig along with t-tracks and love that combo for that jig. Thank you for that comment and input. I’m always looking for input on how to improve projects and conversations like this are more than helpful.

@lharty6892 4 месяца назад

Currently saving videos to build a drill press table and added yours to the mix. I really like your dovetail design. The only drawback I see is a lack of dust collection. Have you thought about adding this feature?

@n2darkness 4 года назад

To make things go easier and save both your router and router bit and I believe it even states in the instructions it is best to cut a dado slightly smaller than the dovetail first. Great project otherwise and the clamps are a very versatile tool.

@PenaltyBoxWoodshop 4 года назад

Yep, your exactly right and something I should have mentioned in the video. A relief cut with a smaller bit or even the table saw would have been a good choice. Thanks for watching!

@carlbrothers 4 года назад

Microjig now makes a bit to help with that, AND they make them in both half inch and quarter inch shanks.

@kdtrimble 3 года назад

Beautiful. But easy? Maybe for a pro but not a hack like me, lol. Thanks for the video and plans my friend. I might give it a go.

@PenaltyBoxWoodshop 3 года назад

Hahaha you got this! It’s not too bad

@soledude Год назад

👏👏👏

@billbender6926 4 года назад

This is an awesome project that will really help upgrade my drill press. I use a mortising attachment (a drill in the center of a square chisel) in my drill press to make mortises, and I need a way to integrate a vertical clamp to hold the work piece down as my mortise drill rises. I’m thinking a vertical slot in the stop block might work. Any suggestions?

@PenaltyBoxWoodshop 4 года назад

Thanks bill!!! The slot the I made on the fence will work with a dovetail clamp. I would suggest clamping it to the fence instead of attempting to figure out a way to clamp it downward.

@markmurdocca2456 4 года назад

Great video! Did you run into a problem with the handle to raise/lower the table hitting the extended top?

@PenaltyBoxWoodshop 4 года назад

Thanks! Nope, not a problem on mine but the table can easily be removed if it’s in the way.

@user-jl4ki7sl8q 4 года назад

Кудесник .👍

@PenaltyBoxWoodshop 4 года назад

+Алексей Тарасов 👊👊👊

@dougmalama7067 4 года назад

You didn’t show how you use the dove tails in the video, but I’m impressed with it though. Very nice work.

@PenaltyBoxWoodshop 4 года назад

Thank you I appreciate that. They were used to hold the fence and I used the dovetail clamp to hold the piece of walnut down while drilling it.

@mmart1nez 3 года назад

Great build!do you have plans for this?

@PenaltyBoxWoodshop 3 года назад

I do! They are in blog style on my website

@mmart1nez 3 года назад

Found it! Thank you!

@larryspooner5417 4 года назад

I like the table for the drill press, but I also like the counter-sink drill bit. What is it?

@PenaltyBoxWoodshop 4 года назад

Thanks! It an Amana Tool counter sink bit. There should be a direct link to it in the description section of the video if you want to check it out!

@richragan4810 4 года назад

Just got a newsletter from the great folks at MicroJig which is how I got to your video. Great idea and I subscribed. How do I get the plans for your drill press table?

@richragan4810 4 года назад

I have ofet wondered where is the "Description" referred to frequently.

@PenaltyBoxWoodshop 4 года назад

Hey Rich, thanks for your support and following the channel. The cut list and everything you need is just below the video. You will see the title of the video and a little arrow pointing downward next to it. Click that arrow and it will expand the description section and you will see it.

@richragan4810 4 года назад

I am equally as impressed by your quick response, your videos, and web site. Great job! I look forward to learning more. Oh and love the background music.

@PenaltyBoxWoodshop 4 года назад

+Rich Ragan Thanks Rich! I really do appreciate the kind words and you taking the time to comment.

@stefanahlgren6017 4 года назад

@@PenaltyBoxWoodshop I cannot find the little arrow You write about. Hiw do I find it? Is it perhaps a US feature (I watch in Sweden).

@kenluning909 4 года назад

Nice build. Where did you get the hold down fasteners from?

@PenaltyBoxWoodshop 4 года назад

Thanks friend! I think they were pieces together from hardware from Lowe’s but to be honest they have been laying around in my shop for so long I can’t remember to be exact.

@kenluning909 4 года назад

@@PenaltyBoxWoodshop No worries. Have not used those before. I like that you can fasten them with screws unlike the standard t-nuts that just press in.

@carlbrothers 4 года назад

Found them. I had asked on IG about them too. As I have a lot of 1/4 20 all thread and bolts, this might be an option - I'm thinking of buying this from Lowe's. Any recommendations? www.lowes.com/pd/Hillman-1-4-in-Stainless-Steel-Standard-SAE-Brad-Hole-Tee-Nut/3025380

@jeffthurston9835 4 года назад

Building something like this over the weekend, thanks for the video! Your counter sink bit with the collar, what brand is that and where did you get it?

@chrisjohnson8291 4 года назад

I was going to ask the same question. It sure beats drilling the counter sinking.

@PenaltyBoxWoodshop 4 года назад

Awesome! I you have any questions while your making it just shoot them to me and Ill help where I can! Its an Amana tool countersink bit and I put a direct link to it down in the description section of the video for you. Just scroll down past the "List of Tools" area. Thanks again!

@PenaltyBoxWoodshop 4 года назад

@@chrisjohnson8291 Its awesome and I use it all the time! Its an Amana tool countersink bit and I put a direct link to it down in the description section of the video for you. Just scroll down past the "List of Tools" area. Thanks!

@charlesthomas9294 3 года назад

[Proceeds to apply 100 clamps to the project.] You can NEVER have too many clamps!

@PenaltyBoxWoodshop 3 года назад

Hahaha NEVER!

@24revealer 4 года назад

It might make more sense to put your dovetail slots on each side of your insert block instead of into it... I got a pair of these a while ago, I should start using them...

@PenaltyBoxWoodshop 4 года назад

Yea, it would allow you to get the clamp closer to the bit for sure. Not a bad hindsight idea at all! Thanks you! Also, those clamps really are handy. I use them for all kinds of things in my shop.

@carlbrothers 4 года назад

Do you realize that you can take the bolt out of the top of the clamp and invert it? For those times when you can't get the bar under your work piece.

@richragan4810 4 года назад

Hey Jess what is the name and band playing the background music for this video? Really great music Jess!

@PenaltyBoxWoodshop 4 года назад

Thanks! I’m really not sure. It’s from Epidemicsound.com

@richragan4810 4 года назад

@@PenaltyBoxWoodshop Thank you.

@Sebastopolmark 4 года назад

GREAT table, definitely on the the build list. The link to the plans does not work nor could I find them you your website - just a FYI. Thanks

@PenaltyBoxWoodshop 4 года назад

Thank you! I’ll check those links ASAP and get them fixed. I’d you loon in the Plans/Tutorial section of my website there is a full blog with cut list in that section.

@PenaltyBoxWoodshop 4 года назад

Link has been fixed! Thank you so much for letting me know!

@roncooke2188 4 года назад

Looks like you do could use some sort of dust extractor music got on my wick then advert i switched off

@PenaltyBoxWoodshop 4 года назад

I just use a wet vac to clean up. Not sure what the other part of the comment meant. Did you not like the music?

@rickwright3219 4 года назад

What do you do if you have to drill close to the fence and the chuck can't get past the fence?

@PenaltyBoxWoodshop 4 года назад

My guess would be to move the fence back and adjust it so that the edge your drilling against is the one away from the fence. If that makes since. Basically instead of positioning the piece with the hole being drilled against the fence position it so that edge is the one opposite and away from the fence.

@jwheetree 3 года назад

How do you keep the ply from splitting apart when you clamp something?

@PenaltyBoxWoodshop 3 года назад

Splitting apart where? Not sure what you mean

@Loki_is_my_name 3 года назад

I've just discovered your channel after watching your Instructable for the dovetailed vise. I'm just starting out, and don't have much of a disposable income, therefore I don't have access to many of the tools that you are using. (Bench saw, router table, etc) After moving into my current house, the previous owner left a drill press and a 2 wheeled grinder/polisher. Anyway, my point....what are the basic tools that you would recommend that anyone starting out should have in their workshop? U.K. Based, so don't have much space when it comes to having a workshop...basically a large shed!

@PenaltyBoxWoodshop 3 года назад

Hey Mark! Thanks for the support! I actually did a video on this exact thing and if you go to my RU-vid channel you can check it out. It’s much more in depth than I can go into on a comment.

@Loki_is_my_name 3 года назад

Penalty Box Woodshop just watched it. Thanks. It looks as though this is going to be an expensive hobby! Sorry, I have another couple of questions. I like to pick the brains of those with more knowledge than me...how else are we noobs supposed to learn? (Read a book? Nope...I want to use tools! lol) Would a portable table saw be a better option, rather than having a large permanent station and a mitre saw? I don't have the space for the sort of table saw that you have, and I don't have the space for both. It's either one or the other for me! Is there such a thing as a modular table? One where a saw unit can be installed, then removed and replaced with a bench router?

@PenaltyBoxWoodshop 3 года назад

Yep to all of those! I portable table saw will work just fine for small beginner projects. Mobility of your tools and smart use of your space is important when running a small shop so a table that you can interchange tools is a great idea

@Loki_is_my_name 3 года назад

Thanks very much for your advice. I'll have to start saving the pennies in order to buy my starter sets.

@frederickatz1140 4 года назад

Do you have a part number for the circle nuts (mounted underneath) and the bolts and toggle that are used to mount the table to the base of the drill press?

@PenaltyBoxWoodshop 4 года назад

Those were just around the shop and I used them. Not sure but I think I got them from Lowe’s or homedepot. I’ll have to search around to see if I can find some similar ones.

@HeyDuda06 2 года назад

@@PenaltyBoxWoodshop I know it’s a year later, but I’m also wondering what you call the circular threaded insert you put on the bottom to mount it to the table. Do you know what this is called? I’m trying to find where I can get one. Thanks!

@jabe00 Год назад

If I understand correctly, they are called “Brad Hole Tee Nut”

@danielguilfuchi2561 4 года назад

I enjoy the project pretty nice. But the measuremen what what I like to let me know thank you

@PenaltyBoxWoodshop 4 года назад

Thanks! Can you clarify your questions, please?

@danielguilfuchi2561 4 года назад

I would like to know the actual measurements of your project. I think it is a really nice project. Thank you.

@PenaltyBoxWoodshop 4 года назад

Gotcha! Thanks for clarifying. There is a link in the description section of the video that takes you to the free plans and measurements. Or you can go to my website at penaltyboxwoodshop.com/planstutorials

@roncooke2188 4 года назад

What are you making

@PenaltyBoxWoodshop 4 года назад

It’s a drill press table

@hanshartung1916 3 года назад

IN that captured golf ball, instead of hogging out the holes, why not use a router with a straight bit to make your elongated holes. Would be faster and more precise.

@PenaltyBoxWoodshop 3 года назад

I guess you could but it would have to be one hell of a bit haha

@benzbabecki6309 4 года назад

It's a nice table. Though your method of securing it to the drill press table made me laugh. I would have allowed for and installed T-bolts through the bottom plate to go through the slots in the drill press table. And probably would have keyed it. Just my machinist/tool make background coming out.

@PenaltyBoxWoodshop 4 года назад

+Benz Babecki hahah well, I’m glad you got a laugh out of it at least.

@gordonputnam9820 4 года назад

@@PenaltyBoxWoodshop I like that clamp idea (DP table to CI table) Whose clamps are they?

@KenGehrke 2 месяца назад

why don't you just make dove tails under the table, instead of buy hardware and using off market clamps , when you can use Microjig dove tail clamps to clamp the jig to the drill table in any direction. IT IS A MICRIOJIG IDEA

@royrogers4178 3 года назад

No doubt this video would have been much more informative without the annoying music, but it's your video. I just mute the sound.

@PenaltyBoxWoodshop 3 года назад

Sorry Roy, I don’t think it affected how informative it was. Possibly affected how entertaining (to you) it was but I was very informative with the voice overs so I’m sorry you had to mute it. The constant sound of those particular tools isn’t very appealing in my opinion. Thanks for watching though!