DIY Fiber Laser Cutter V2 | Part 6: Leadshine EL8 Series Servos

Подписаться 17 тыс.

Просмотров 10 тыс.

50% 1

If you want to build your own fiber laser cutter, join our Patreon group: / diyfiberlaser
Today we finally start installing the Leadshine EL8 Series servo drives and motors on my DIY fiber laser cutter V2! We also install the Leadshine servo drive for the Raytools BM110 auto-focus laser head focusing unit. Stay tuned…there will be a Part 2 video where we do the auto-tuning for the motors.
-------------------------
Thank you to Leadshine for sponsoring the servo motors and drives for this project! If you would like to learn more about their products and get a quote for your project, visit their website at www.leadshine.com or email them directly at sales@leadshine.com
-------------------------
If you need laser components for your project, check out Sky Fire at alleriastore.com
You can receive a 5% discount on laser components use the code: “FROMTRAVIS”
(this discount applies to all products except for the laser machines)
--------------------------
My website: www.id3ntitycrisis.com
My design portfolio: www.id3ntitycrisis.com/portfolio

Опубликовано:

24 июн 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 39

@wzh9453 12 часов назад

I would like to advise you to avoid LEAD SHINE. I'm currently using a LEAD SHINE servo, but I'm regretting the purchase because of the worst A/S team. Technical support is either ignored or only receives short, frustrating voicemail replies. The technical support team's Lv was always busy, and the A/S manager who was introduced next was also the same. It is important to remember that you have to pay a stress fee for LEAD SHINE products. 👎

@pierreboone568 21 день назад

That's a nice piece of work, I'm 73 years old and I really enjoy watching your videos.

@nevillesidneygerber150 14 дней назад

Im a cnc laser technician do work work for most Chinese companies H.S.G, Sengfeng and oree

@homemadetools 14 дней назад

Great build. We shared this video (and the previous ones in the series) on our homemade tool forum last week 😎

@luke1811 21 день назад

Awesome. I recommend installing a nice machine main switch on the outside instead of the circuit breaker, they are pretty cheap and look/feel better, plus you're not fumbling around in your electrical cabinet with live wires all over :)

@plasma453 14 дней назад

Fibre lasers create quite a bit of dust not dis similar too plasma. Wondering what your plans are for that?. Great project by the way.

@mikeselectricstuff 21 день назад

Surprised those Leadshine units aren't DIN Rail mounted - thought this was pretty universal these days

@nielviljoen5276 21 день назад

I would recommend not daisy chaining grounds but have one central eartpoint - great series very keen on building my own

@Arek_R. 21 день назад

Should've gone with taller cable trunking especially with such tall devices (those come in various sizes).

@TAMARbarCNC 21 день назад

Hey Travis do you have any discount code for purchases is leadshine?

@ChromedOutDubs 14 дней назад

This series is advancing quickly, and I love it!

@weldchip 21 день назад

nice to see you are making some good progress, looks like it will be a nice build. some tips for general good control/machine design. your z brake and motor power & laser should be wired through an estop and the controller, i wouldn't rely totally on the controller, if the software hangs the machine may not stop. the 24volt for the brake should go through a relay wired to the estop . The laser and motor power should go through contractors also tied into the 24v estop chain. also don't daisy chain the grounds it will likely result in noise issues run a ground wire for each drive back to the central ground bar and follow a star topology. you may also want to put a separate noise filter on the power to the drive logic if your doing fast rapids the power put back on the ac line during hard deceleration can potentially cause spurious logic faults.

@Anatheme- 14 дней назад

wow I'm jealous. Those leadshine motors are super nice.

@GlassImpressions 14 дней назад

This video series is awesome!!!

@VectorGameStudio 21 день назад

Good job

@movax20h 14 дней назад

I just discovered your channel, not sure how I missed it.

@AD72and0 21 день назад

What software did you use to create your wiring cheatsheet? Im currently building my first cnc and am at the point of creating schematics and wiring diagrams. Im using powerpoint, which is far from optimal. Looking for recommendations please! Very jealous of your shop btw, keep it up!