DIY FORCE FEEDBACK GAMING STEERING WHEEL | ARDUINO

Подписаться 2 тыс.

Просмотров 278 тыс.

50% 1

New and better Wheel : • DIY FORCE FEEDBACK GAM...
Download all the Files from here 👇
cults3d.com/:1...
*Hardware used:
-Arduino Leonardo ( only Leonardo and pro micro works)
-600 PPR Rotary Encoder
-12v 5A Power supply ( use 10A for better torque)
-RS775 12v DC motor
-BTS7960 motor driver
-DB9 female plug
-Microlever switches
-M8 Threaded Rod
-M3 nut and bolt
-608 ball bearing
-8mm magnets
-100 tooth large pulley
-20 tooth small pulley
-280mm GT2 Belt
-12v 3 inch DC Fan
-different types of Switches
-plywood
-3D printed parts
*Software:
-RFR wheel Config - 👇
www.kaskus.co....
other helpful link -
EMC Facebook Page / emcdeveloper
www.racingfr.n...
-Solidworks for 3D designing
*Tools Required:
-3D Printer
-Drilling machine
-Jig Saw
-Angle Grinder
-Soldering Iron
-Gluegun
-Wire cutters
-Screw driver
-Spanners
-Wrench set
-Allen key

Опубликовано:

15 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 568

@AllenResalam Год назад

Check out my latest Steering wheel ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-36a_XrbJZJQ.html

@a8gaming951 4 месяца назад

It is too difficult to make for me 😔

@anhoanghocgioi3140 Год назад

A belt drive FFB? Bro is humiliating the entire Logitech G29 Dev and Engineering team fr

@СергейОлейник-ц8я 10 месяцев назад

Abahahahaha

@bmthfan1231 2 месяца назад

Except it's better than this. Next

@GhosthoundYT 21 день назад

Logitech Momo already used Belt Drive back then. I guess G29 made with practicality and budget in mind

@simracersarma19 Год назад

That's really a very good innovation. Really proud of you man.

@at7755 3 месяца назад

magnetic paddle shifters are crazy W video

@WolfGaming-14 Месяц назад

is there something named Nobel price? because this guy deserves one.

@LRTOTAL 2 года назад

Amazing, I tried doing this with another motor but my design wasn't great and the belt kept skipping. And ultimately the force feedback wasn't strong enough. So went with a bigger motor, the MY6812, and a 3d prited 5:1 gear reduction. The only problem now is that when turning the wheel I can feel a little cogging torque. But not enough to break the immersion. I am using the same components basically, the same H bridge, Arduino Leonardo... On the Leonardo I put one of those perf-board shields and used crimped JST XH connectors to avoid the soldering hell of my previous version haha

@santiagokinen4711 Год назад

did you try putting a belt tensioner like car engines have? it might solve your belt skipping problems

@UncleData92 4 месяца назад

are there slots for additional buttons on adrino leonardo?

@BrainlyMathsbyPriyanka 5 месяцев назад

That looks like a newly purchased stearing wheel, great job man

@AllenResalam 5 месяцев назад

Thankyou so much!

@formidhun 2 года назад

as you promised last time.. great job.. thanks a lot for the video 👏

@AllenResalam 2 года назад

My pleasure 😊

@gnoledgeofficial1575 3 месяца назад

Bro from where did you bought the 3d printer @@AllenResalam

@ДамирФейсханов-ж9д Год назад

Bro, this is an awesome steering wheel! I already wanted to order spare parts, but I didn’t understand the diagram, if it’s not difficult, please send a detailed diagram. It's just that not all the components are on this one.

@UGayan Месяц назад

did you make it?

@julianzelaya7262 2 года назад

Awesome! I´ve got two questions 1) Is it enought the strenght of the gt2 belt and pulley system? 2) To wich port numer in the Arduino leonardo do you conect the phase (A) and phase (B)? Thanks

@AllenResalam 2 года назад

1) yes it is enough 2) D0 & D1

@AnandakrishnaSudhakaran 2 года назад

yo bro , nice work . I really appreciate your work. All the best bro😃😃😃👏👏👏

@AllenResalam 2 года назад

Thank you so much 😀

@Arifi777 11 месяцев назад

Like realy greate but non of us have money to buy one properly idk about u but for us it is what it is. Alsi we dont have what it takes to make one like this about you keep it up nice job!

@RALLYFANCLUBn1 2 года назад

ну ты молодец! юный техник!) подписался

@AllenResalam 2 года назад

thankyou!

@ОлегЕгоров-ы1е 2 года назад

Круто, я в шоке оказывается все просто. Молодец и спасибо за идею

@tewenduyihune8878 2 года назад

It's one of the best builds but i can't find the motor driver in my area. can we use other type of motor drivers can you list them . Thanks

@AllenResalam 2 года назад

sorry i dont have any other recommendation

@racingaddict3719 2 года назад

Great proyect! I've got a 10000 rpm motor and a 20 and 80 teeth gt2 pulleys. Do You think thats is enought? Thanks

@AllenResalam 2 года назад

I think so!

@shido5248 3 месяца назад

Please upload the tutorial video slowly explaining everything 🙂

@devampatel1265 Год назад

Hey great video! I had one doubt in the circuit diagram why are there 3 microlever switches marked but you only use 2 for paddle shifters right

@AllenResalam Год назад

3rd one can be used as another switch or something , its not related to paddles

@syedahsan3848 Год назад

Hello sir,can we put an 1024ppr encoder,will it work??

@AllenResalam Год назад

yes

@abdelhaq6666 5 месяцев назад

Great job! I'd like to do one myself, can you share what is the resistance used?

@leo-df2rr 22 дня назад

una pregunta, en vez de usar un encoder se puede usar un motor paso a paso de una impresora? en mi pais los venden muy caro esos motores encoder

@kunaldhar6713 Год назад

excellent video! Just wanted to know how's the delay like? i see that when you put input through steering, the game receives it after like 0.2 seconds.Is it good for drifting in beamng drive?

@AllenResalam Год назад

there is no visible delay for most games, few games do have input lag . I designed this to be the simplest FFB wheel you can make , im working on something better.

@mahmutcaliskan1221 Год назад

Hello i connected everything but on wheel config the rotation doesnt show but on emc i can see the rotation and my motors only runs one direction i am using bts7960 20a. also sometimes motors just keeps spinning why would that be?

@AllenResalam Год назад

check your wiring again, if you mess up one line everything will fail, also use EMC, wheel config have a ton of bugs

@Hrithikcv007 5 месяцев назад

Bro in wiring diagram there are 3 button u only used 2 for pedal shifter Is that button for handbrake??

@francogigli5108 2 года назад

excelent job my bud! i wana do somthing like that. the encoder is incremental or absolut?

@AllenResalam 2 года назад

Incremental Optical Rotary Encoder

@wal-3732 2 года назад

1.What if we use other type of DC motor? 2. I can only get printer encoders does it have effects that can be seen visually or is it enough for driving . Is it better than potentiometer? 3. What if I change the gears... 🙏

@AllenResalam 2 года назад

1. yes you can use any DC motors, just need proper power supply for that 2. printer encoders works , but not sure how accurate and responsive they are. potentiometers cant be used in FFB system 3. you mean pulley, bigger pulley = more torque on wheel

@melvilledsouza 2 года назад

Beautiful build, love the box design. I have been wanting to build this for nearly a year now, but what kept me from building the encoder as they use the IP2770 encoder which isint available in country. My question is whether the 600ppr resolution is enough? Can minute adjustment be done to the steering wheel smoothly unlike in your potential steering wheel video?

@AllenResalam 2 года назад

trust me 600 ppr is more than enough, it is precise and responsive to quick movements, go for it.

@melvilledsouza 2 года назад

@@AllenResalam Cool, Thanks!

@GoalCross 2 года назад

did you make it cause i want to but idk anything about it if u did pls tell me

@Jesse-de7dw Год назад

@@AllenResalam I have an encoder that has a ppr of 6911, but i think ist a bit much because my arduino cant count the pulses quick enough. any ideas how to fix it without buying another encoder?

@seg522 2 года назад

you are answering a lot of questions that helps a lot tnxx but once if i bought emc can i use it for 3 or more steering wheels and if i use printer encoder would that be accurate like yours

@AllenResalam 2 года назад

EMC can be only be used on ONE pc, ( 1 PC - 1 License file ) but you can use multiple steering wheel on one PC, i dont think printer encoder will be accurate and lag free compared to he ones i use

@rukagaming-4245 Год назад

Amazing work bro i really appreciate it 😍 but i need to know the value of the resistors you used for the encoder!

@AllenResalam Год назад

4.7 K

@yassinemokaddem909 Год назад

Bro, can the steering wheel work without putting or doing the pedals and the gearbox??🤔🤗💪

@AllenResalam Год назад

yes

@julianzelaya7262 2 года назад

Great proyect mate! How is the compatibility with games, such as acc, iracing, project cars and f1

@AllenResalam 2 года назад

Everything works fine as you can see in the video

@starrocks_ 11 месяцев назад

2:32 can you tell me why you install that fan? I don't know anything about these but i will follow your steps to make it. Is that fan for cooling the motor or something?

@AllenResalam 11 месяцев назад

yes its for cooling motor and its necessary

@starrocks_ 11 месяцев назад

@@AllenResalamand also one more question, at 3:57 in bottom right corner can i put 2 motors wire in same ports (and use both motors as you used in latest video) will that software recognize it?

@AllenResalam 11 месяцев назад

yes but its better to connect two motors in parallel like in my latest video

@GAMEXPLAINE918 Год назад

Bro what if I use 2 rs775 motor instead of one will I get more ffb ( as I want to use a heavy deep dish wheel) or should I change anything pls suggest

@AllenResalam Год назад

use 2 motor or use a much powerful large motor

@GAMEXPLAINE918 Год назад

Thanks

@GAMEXPLAINE918 Год назад

@@AllenResalam well I had another question about software should I use emc lite or rfr

@AllenResalam Год назад

its better to go for EMC pro

@idhamsatria1288 2 года назад

I want to build this on my weekend, any other tips for 3d printed component subtitute? Cuz i dont have any or my place doesnt provide any 3d priting services

@AllenResalam 2 года назад

use can use M8 pillow block bearing, use 1 inch mdf board to make steering wheel, sand to make curve, use 10A power supply instead of 5A. aluminum pulleys are available .good luck!

@bobavok1861 2 года назад

Hello! First of all very nice build! I have a question, does the rpm matter because i have a 895 12v dc motor which has 5000 rpm and the 775 has 3500 rpm? If i use the 895 motor the steering will be faster, bad and i have to use another settings for FFB, or better because it has more rpm and more power? Thanks. 🥰

@AllenResalam 2 года назад

Rpm doesnt matter, torque does in this project. 895 have more torque than 775. you have to tweak some settings in the app to get your preferred ffb effects in all motors, so yeah you can go for with 895.

@bobavok1861 2 года назад

@@AllenResalam Thank you so much! 🧡

@CloudStrikeGaming Год назад

Does it work with Forza horizon 4/5

@AllenResalam Год назад

yes

@huntinggamer8260 Год назад

Hi is two phase encoder enough? how many phase your encoder have and what it represents direction of motor like clockwise or anticlockwise? Thank you

@huntinggamer8260 Год назад

Also which country you are from if you dont mind and how much it cost you 600ppr encoder?

@AllenResalam Год назад

yes its a 2 phase encoder and costs 1500 Rs in India

@muhammadfikririzalalamin6018 Год назад

thank you for the google drive, i cant download wheelconfig and hex file in aiwave web site, looks like the developer delete everything. Thank YOU

@Mark_Proton 3 месяца назад

GTA's lack of deadzone adjustment is a crime.

@milesmorris27 Год назад

What are the potentiometerson the soldering diagram at 3:56? I don't see any potentiometers being used. Also, in the diagram you only have a handful of things going into the arduino, but in the video you have almost every port taken up. Which one is correct?

@AllenResalam Год назад

Those are pots of Pedals , also that diagram is from a forum , i used the other ports for extra buttons , if you spend sometime understanding the diagram you will get a clear idea or you can wait a bit more for my new video , its much better.

@gnoledgeofficial1575 3 месяца назад

Bro which 3d printer you used and from where to buy

@AbdülkerimYilmayan 4 месяца назад

I dont understand how did you use a 12v 5a power supply they have overvoltage Protection and will shut Off when 775 Motor is connected right? Did you do and modification Hope you can clear my Doubt thank you.

@AllenResalam 4 месяца назад

No I didn't do any modifications, but you need 12v 10A Or 24v 5A smps for max motor output or you can use a car battery

@AbdülkerimYilmayan 4 месяца назад

@@AllenResalam oh alright I will try it Thanks for the help and btw i subscribed nice work👍

@AllenResalam 4 месяца назад

Thank you and good luck with your built 👍

@newsidea9456 2 года назад

What is the use of DC motor with steering system ? Thank you in advance ..!!

@AllenResalam 2 года назад

For Force feedback effects, auto self centering, vibrations, spring effect etc

@thejuviswam860 6 месяцев назад

I tightened the ball bearing with nut but the rod was tight it could not spin easily. what can I do to reduce tightness?

@mrpetrolic 2 года назад

bro for what have u used the micro lever switches and what are the three things at bottom of circuit diagram ? and explain the circuit bro plz and hats off to ur patiency

@AllenResalam 2 года назад

the micro lever switches are for paddle shifters and those 3 are potentiometers for pedals

@pcparlor 2 месяца назад

It's a badass build muddied up with unnecessary time fillers

@beingcarenthusiasts Год назад

Wow dude awesome build. Can you please tell all the things name or online link it will be more helpful

@AllenResalam Год назад

check description

@Nuca_xD 2 года назад

i have a question. if you change the rotary encoder with a 20k potentiometer is enough to run smoothly?

@AllenResalam 2 года назад

You can't use a potentiometer with this model

@josedomingovegaviera2371 2 года назад

It seems that the software links from aiwave are all broken. Anyone has any alternative links?

@AllenResalam 2 года назад

drive.google.com/drive/folders/130OB-KdsTCtjxZrEUzBqd6_-f2wu6uZ-?usp=sharing

@yashvanths309 2 года назад

Thank u bro

@SameerSingh-yp2ei Год назад

@@AllenResalam is this 900° wheel?

@ernestoutright6265 Год назад

what Diameter of rotary encoder shaft ? and are you using resistor for connecting cable encoder to arduino?

@AllenResalam Год назад

6mm shaft and yes

@Him_4421 3 месяца назад

can we use 60 tooth pulley instead of 100 tooth large pulley

@k4t_19 3 месяца назад

hi bro i am planning to make tis for my school exhibition can u give me the connection diagram of the aurdino board

@kjstudiotv3185 2 года назад

hi bro this build is awsome probably the only build i understood that doesnt require that many cool tools and resources but can you tell if i can use this with a PS 4/5?

@AllenResalam 2 года назад

Thanks. This only works with PC

@milesmorris27 Год назад

Awesome build! Do you know how long your m8 threaded rod is? I am also wondering what you would recommend if I wanted to upgrade it a little to make it a little better? What should I do?

@AllenResalam Год назад

1) M8 rod is 25cm long 2) use 2 motors and 20 amp smps or car battery for max performance 3) im working on a better version of this , stay tuned!

@milesmorris27 Год назад

@@AllenResalam Thank you!! Any idea when that will be done? I am building a DIY racing sim for a senior capstone class at school.

@aUssieOBoys Год назад

Hey great vid! What's is diameter of the m8 pulley bore bit?

@AllenResalam Год назад

8mm

@deepakhd1626 Год назад

I am facing some issue, Without the motor, the steering works fine. While using motor, steering doesn't recognise the centre. The triangle (in wheel config) rotates for one side from 0 to set angle, and doesn't work on other side. Please help me.

@AllenResalam Год назад

I recommend you using EMC , wheel config is always buggy and pain to use

@viniciusfontinele2856 2 года назад

Very nice project man! I'm planning mine, could you tell me how much torque in Newtons meter the combination of motor and pulleys yielded? I'm doing it for drift.

@AllenResalam 2 года назад

i haven't calculated the torque but i promise its good enough, with dual motor setup its more than enough for any type of race or drifting etc

@saquenmedelatinoamerica1203 2 года назад

@@AllenResalam i have a question, can i use an arduino Uno and still having force feedback?

@synchronuse Год назад

@@saquenmedelatinoamerica1203 I assume he used a Leonardo for it's USB functionality, but yes any Arduino will work with that motor driver. UNOs don't have native USB support, so that would be a lot harder.

@Sahilkumar-fh3jd Год назад

Can we use a 24V 5amp power supply? Will it be better than the 12v one?

@AllenResalam Год назад

yes, same

@ercancavusoglu3179 Год назад

Hi, I'm trying to make nffb steering wheel but unfortunately, I cannot make work the encoder. I tried connections with and without 1k resistors from 5v to a and b. I tried to connect pin 6 and gnd. Used both EMC and wheel config but it does not work. In emc it recognises the arduino, the light inside the encoder is working but there is no output. I would very much appreciate if you could help me.

@AllenResalam Год назад

you need to use 4.7k resistors or it will damage the encoder and gives false values , check the wiring diagram in description

@milesmorris27 Год назад

do you have a diagram of the dimensions for your wood box and where to put everything?

@AllenResalam Год назад

its 25 x 25 x 11 cm , put the shaft in middle and figure other things out on yourown

@AllenResalam Год назад

im working on a much better model , it will be more detailed

@SushrutPhutane 2 года назад

Great work!!

@yassinemokaddem909 Год назад

Hi bro, the steering wheel Can work without pedals and H-shifter ???

@AllenResalam Год назад

Yes

@rajensungkur4506 2 месяца назад

Can i use any other motor driver like the L298N MOTOR DRIVER BOARD or does it have to be the same as the vid

@AllenResalam 2 месяца назад

No, use the same driver

@Kozent15 2 года назад

Did you have to do anything special to get it working with Snowrunner? Do the pedals work too? Nice work!

@AllenResalam 2 года назад

Yes snowrunner is tricky to work, i did something but its not hard, follow this video ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-vEcKw1PVPpQ.html

@totallynotsus2784 Год назад

hey this was really dope could you make one with manual gear shifting/stick

@walty28msn Год назад

Awesome work, ótimo video👏👏👏👏

@jayare7750 Год назад

Do you have the source code you can share for this project? I only see a hex file. I'd like to add more buttons on custom steering wheel I'm making

@AllenResalam Год назад

i dont have it, every file is in the drive link

@YeetTheAn3On 4 месяца назад

May I know the infill for the 100 tooth 3d printed pulley? I want to try to build this myself

@AllenResalam 4 месяца назад

20 % will be enough but make the outer wall 4 layers

@YeetTheAn3On 4 месяца назад

@@AllenResalam Is the 2 bolt and 2 nuts locking mechanism for the pulley M3 sized?

@patutyamaniaki6045 Год назад

Hey there mate. I really liked your design of the wheel. Currently i am ordering the parts!!! Although i am little lost at the wiring between power supply driver and the leonardo. Can you just tell me if there is any type of documentation in the arduino code itself or i have to look it up?

@AllenResalam Год назад

just follow the diagram

@botmaria432 2 года назад

hey man, i love this and im trying to get all the parts but I can't get the 100 tooth polley, i can only get 60 tooth. Is that going to affect the speed too much? i guess its going to have more torque. What should I do? or what combinations of pooleys should I use?. Thank you.

@AllenResalam 2 года назад

larger the pulley more the torque, if you cant get pulley with more than 60 tooth, try dual motor setup, its 4x better than single motor setup.

@kishoreapv2807 2 года назад

great job, where did u buy the rototary encoder btw? i cant find it on amazon, how much did u buy it for in inr ?

@AllenResalam 2 года назад

i got it from Robu.in for 1600 Rs

@thejuviswam860 3 месяца назад

I used rs775 motor and after some use the motor got heat up and after that power supply light keeps blinking and motor is not working i am experiencing this with my 3rd motor

@AllenResalam 3 месяца назад

1. Use fan, it's important 2. Reduce Ffb 3. Use 2 motors

@frigelefrigo2890 2 года назад

Hello, your project is very cool and I would also like to build such a steering wheel. I only have one problem: When I go to the link for the RFR Wheel Configurator software and on the website to download it, it doesn't work as I get a page not found message. Do you know what the problem could be?

@AllenResalam 2 года назад

drive.google.com/drive/folders/1q4dVHUX3QrYxoNQURv9Wo9qgQxIsHTnO?usp=sharing

@frigelefrigo2890 2 года назад

@@AllenResalam Thank you so much

@samadjamadar9681 5 месяцев назад

why you didnt bought the real steering wheel from a scrap shop?

@Crix4evaTnT 2 года назад

I got a question about the Arduino Leonardo R3 version will it work the same as the original Arduino Leonardo ? or is there a difference

@AllenResalam 2 года назад

I think its better you go for Leonardo R3 as its newer version, if you are using EMC utility pro, then go for STM32F401 board

@Crix4evaTnT 2 года назад

@@AllenResalam i want to built a full system Wheel, H Shifter and pedals the R3 will work right?

@AllenResalam 2 года назад

Yes it have enough pins for steering ,pedals 5 speed shifter, paddle shifter and hand brake( use analog pin)

@Crix4evaTnT 2 года назад

@@AllenResalam Thank you a lot dude 🙌👍

@svstudioworld2598 Год назад

@@Crix4evaTnT put a detail video about your project

@unknown_akashsingh Год назад

Sir... Arduino Leonardo...ki jgh par Arduino Uno use nhi kr skte hai kya ?

@AllenResalam Год назад

Uno wont work

@tanishkprem1028 Год назад

can I use arduino pro micro v5 16m mini leonardo instead of arduino leonardo as they both have the atmega32u4 chip

@AllenResalam Год назад

yes

@Gamezoneadi 2 года назад

How much did it cost u make this?

@mahmutcaliskan1221 2 года назад

Nice project bro, when are the 3d files uploading ?

@AllenResalam 2 года назад

soon

@mahmutcaliskan1221 2 года назад

@@AllenResalam when brother whenn

@agenthulk4288 2 года назад

What will happen if i change the encoder with higher ppr encoder? Also what about phase 2/3 I'm new to encoder😅

@AllenResalam 2 года назад

you can only use encoder with a max ppr of 2500 , 2 phase encoder is enough for this project

@agenthulk4288 2 года назад

@@AllenResalam bro actually i need pin point accurate response time. what do you suggest for that?

@maurimetsaroos7179 Месяц назад

actually awesome...

@santoshym694 11 месяцев назад

Bro how did u soldered db 9 connectors please explain

@arpit3146 Год назад

If we can use 12 v 5 amp adaptor so the connection will same as shown in diagram

@seg522 Год назад

hello brother please help me i made one of it but the ffb doesnt work i tried a lot but i dont figure it out what is the input voltage for bts7960 is it 12 or 24v and i worried that the diagram might have mistakes what should i do . please help bro tnxx

@AllenResalam Год назад

Bts input voltage is 5v not 12 or 24

@Bl4Z3_YT. Год назад

Hey how did you connect Arduino to rest of things (sorry for disturbance)

@AllenResalam Год назад

The wiring diagram is in the video

@Bl4Z3_YT. Год назад

Can I use a 1000ppr encoder

@AlguienMas Год назад

Could I not use a dc motor if I don't care about ffb? Would this work on linux?

@synchronuse Год назад

yes and yes

@lovrospoljaric3488 2 года назад

Hey man, can i use a 5000ppr encoder? I dont know the diference about is smaller the better or bigfer the better.

@AllenResalam 2 года назад

Bigger is better but i don't recommend higher than 2500 ppr as it is the limit for the software. 600 ppr is more than enough

@0utj Год назад

I do everything according to the plan. Well, feedback doesn't work. PWM signal is low. The output from the Arduino is 0.9V and the motor almost doesn’t move. I don't understand what's wrong( everything works except the feedback. FFBWheel.0.16.leonardo + WheelConfig_0.21

@AllenResalam Год назад

if the wiring is correct , everything will work fine

@fabriccioantonioguzmandenh2610 Год назад

I wonder if the Leonardo variants that have no brand logo but do have the same chip, I wonder if it would work,

@AllenResalam Год назад

Probably Yes

@aswager9852 Год назад

Could you do this without 3d printed parts

@lovrospoljaric3488 2 года назад

Hey man, i love this build and im planning on building it! But one of my questions is what is the turning radius?

@AllenResalam 2 года назад

There is no physical steering end lock, its set in software and it ranges from 30 deg to 2000+ deg, the motor will lock the steering when it reaches the end angle, so basically you can set whatever turning radius you want

@lovrospoljaric3488 2 года назад

@@AllenResalam Thank you for your answer!

@MrrOogway 2 года назад

But if you plan on adding bottons to your steering or even paddle shifters,I'd recommend looking into buying or making a rotary union joint/ slip ring that allows for continuous turning without the limitations of a cable on how much you can turn it

@Hamza_ah76 Год назад

Can i make this momentanealy only with 1024rp encoder and arduino? Can I add the FFB later?

@AllenResalam Год назад

yeah sure

@ishan9345 Год назад

This looks awesome could i use this software to play carxdrift on moza r5 because it is mot compatible with the game force feedback?

@AllenResalam Год назад

i havnt tried them, if the game have FFB and supports other steering wheels, it will work on this one too

@Automaniac2021 2 года назад

Bro please help me I have made the steering according the tutorial my encoder works perfectly but ffb is not working please help me bro

@AllenResalam 2 года назад

Check the wiring, make sure the device is not damaged

@Automaniac2021 2 года назад

@@AllenResalam bro how can I contact you please tell me

@Automaniac2021 2 года назад

Bro I'm using dual 775 motors

@seg522 Год назад

@@Automaniac2021 how can i contact you mate

@maximilianomartin9892 Год назад

hey Bro, thanks for the great video and idea. but can you provide source code? o want to try using a raspberry pi pico instead of Arduino, thanks again.