Bonjours! Après beaucoup de recherche pour construire volant et pédale, tu es le seul que chez trouver qui explique d'une façon très explique et détailler, donc! un gros merci a toi!
Oh my god!! Brother you really made the fantastic video!! And your video have all knowledge of about car controller that I need. Thank you so much Brother!!!💕💕
I started to build mine a year ago, didn't really had the time to finish it. I continued the project just for my power connector to fail. The plug got a short and the two connector welded together. :D
@@dankdadTech I used a PC power supply. I used a 12V wire. But I abandoned my wheel project, I bought a wheel. When I'll have the time I plan to make a 2 DOF racing sim.
@@DarkRange-vw2pn Logitech G29, its not the best option, if you can get an older one used or new, go for it. Or if you have more you can get a Fanatec CSL DD Ready2Race Bundle.
Hello brother, I got the project working solved potentiometer issues. But now the force feedback is not working properly. It works but not all the times. circuit is correct and no loose connection. Any help is appreciated. Also I have send a email about the queries, Kindly respond. Thank you for awesome tutorial. This was by far best FFB tutorial I have seen
You can use, still better to use the one shown in the video. Cost wise very small difference. L298N cannot handle more current, it can burn frequently.
hi, we connected everything as you showed, we installed emcutiliti on it, but it doesn't send any signal. (we haven't done the pedals yet, there is a problem with the steering wheel) the arduino lights up, but when we turn the rotary encoder, the program doesn't notice it, and the wheelcheck doesn't work with it either. What could be the problem?
the big motor is necessary and only with the encoder. I can make one without the need for a large motor and only with the arduino leonardo excellent video👍👍👍
You can also use smaller motor. But gear/pulleys should be selected considering the required RPM at the end. Even if you don't connect motor, steering works fine. But there will be no force/feedback.
@@techathomethank you bro even I had the same idea of using only the steering, gears, pedals and handbrake, without any ffb. But bro tell me one thing, can I use a potentiometer in place of the rotary encoder by connecting the pin of the pot to the analog input
@@tanishc5yeah of course, might have to change the code but should be fine. I built one without ffb following a video from a guy named Nzgamgingtech I think…. And he used a potentiometer instead. Anyways it should be fine
what do you mean when you say if we want to turn the Arduino to normal, wait if I bought a new arduino do I have to upload " return to stock" hex file before I upload the emc hex file in order it to work?
No , not after buying the Arduino. After uploading EMC firmware, if you want your Arduino to have default firmware, then use that return to stock hex file.
hi bro..i want to ask..i also done diy one wheel using emc software that u are use.but why in dirt 2 game when im play that game i got error that im lost ffb?the wheel fnction also detected but no ffb in game.can u help me?
Yes you can connect. Handbrake is there is pedals tab. For shifter, you can refer to button matrix in the schematics. All these things will be making videos, but it will take time.
In the circuit I have shown the connections for motor supply. Use B+ and B- pins. For the FAN, you can use the same supply if its operating voltage is same as FFB motor.
Hey man,can we also use a potentiometer instead of the encoder with some gears and use it to mesure rotation and use the same software for the calibration?Do you have any recommendations or solutions for that? Anyway your guide is very useful and amazing.Good luck❤
You could do that by modding the wheel firmware, but just get an old inkjet printer from Brother and take the encoder wheel and sensor out of that. With potentiometer you will have a very low resolution.
Hi, another great video!! I would like to ask you if I can mount 12mm round buttons with 3 pins (vcc, out, gnd) on the steering wheel. if so, which pins will be used and which one does it correspond to on the diagram? because in the diagram there are only 2 pins without specifying which ones. forgive my ignorance. Thanks in advance
it can work on any game? like forza horizon, asseto corsa, beam ng... this video is really good, its really hard to find a ffb wheel tutorial in this quality!
Thank you!! My motor is 24v, 13A. But as of now using 12v, 5A power supply. If you are buying supply, better go with variable option(At least between 12 and 24V switching option). In some games if feedback is too strong, it is difficult to move the wheel when motor is powerful. In these scenarios you can reduce the supply.
Hey! I wonder how did you make the encoder to 'turn' the correct way with the Lite. Mine is inverted, so I have kind of flip the encoder that it faces backwards as opposed to yours.
Hello. Nice Job. I'm searching to also make my own ffb wheel for my xbox one s. Will that work for me? Otherwise what I have to do to make it possible for Xbox one s?
Might be connection issues. Refer this video for button matrixru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE--gHQ2EIYm88.htmlsi=sjKX--YRKliesBWw connections:
Can we add gear shifter and hand break inputs too in this Leonardo R3 Board. Can you specify about the Power supply and like how much AMP should we use or just provide a link for compatible adapter
As of now I have done video for paddle shifters and analog handbrake. Shifter: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE--gHQ2EIYm88.html Handbrake: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-Y9GrUO6RuhA.html My motor is 24v, 13A. But for now using 12v, 5A power supply. If you are buying supply, better go with variable option(At least between 12 and 24V switching option). In some games if feedback is too strong, it is difficult to move the wheel when motor is powerful. In these scenarios you can reduce the supply.
great video, i am having trouble in transmission the forward and reverse function using potentiometer pedals sometimes work and sometime don't work please help
Bro i have a pxn v3 pro which rotate 180° if i only add encoder and arduino leonardo in my steering wheel does it work and give 900° rotation pls answer
Analog Hand Brake: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-Y9GrUO6RuhA.html H shifter we are working, you can check paddle shifters for now: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE--gHQ2EIYm88.html
Wich Wheel Are you Talking about because Most of the wheels for example pxn v9 have potentiometers wich cant work with ffb so you would Need to Switch it with an Encoder and Insert an arduino leonardo , bts 7960 Motor Driver , Dc Motor yes its possible but not worth it better make a new base for it
No, It doesn't work with Uno. Arduino Leonardo uses Atmega32u4 chip which itself has built in usb communication. So when you connect this , computer treat it as HID similar mouse, keyboard etc. But Arduino Uno use Atmega328P and one more additional chip just to handle serial communication.
I had the FREE EMC 0.96 version which was removed by the developer because it was very similar in features to the PRO version. V0.96 features the same XY shifter and FFB mode Which is the same as the paid PRO version 😅, luckily I was able to download it before it was removed by the developer. It's just different at the UI and still using Leonardo instead of STM32
LOL you Are really lucky😂 wasnt there a Feature where you can find the ppr if you dont know it i Kinda remember a Feature Like that, that Said something Like find cpr
hey the 22 teeth 60 teeth and 15 teeth pulleys are not available can you pls tell me which pulley should i get please tell me size and also the belts because i dont have knowledge about this. the only thing i need right now are the pulleys. please reply man and btw thankyou so much for making this.
Hello, I had a problem with my rotary encoder that is, when I rotate it to the right, it register the value in negativ, and positive on the left side. Can you please tell what should I do PLEASE REPLY
bro is it possible to use canon ip2770 encoder sensor insted of 600 ppr rotry encoder if its posible how much value of cpr need to be set on encoder settings of emc utility
Even I am not sure about this issue, Even though the potentiometers are connected to different analog pins, there might be overlapping of values from ADC buffers. Not sure exactly.
@@techathome actually now it is fine but when i open carx game it is working but in ets2 it is not working sometimes it works and sometimes not (i am talking abiut ffb )
When i press brake pedal the accelerator Sensitivity also shows in emc utility and when i press accelerator pedal the sensitivity does not show any thing
As per the EMC development forum this firmware supports only for Leonardo and STM32, Since pro micro also uses same chip as Leonardo, you can consider same pin numbers which are available.(I have not tried since i don't have board) . Let me know if it works.
If i want to make only the pedals and not wheel can you please tell what modifications i have to do in arduino board or i just connect the pedal potentiometers and it will work?
Hi, are there any advantages or disadvantages to attaching the rotary encoder directly to the shaft? Is it going to affect performance and feel of the wheel in any way?
There is no difference in both cases functionality aspect. In my case, since I have used same pulleys for encoder and shaft, the ratio is 1:1. Which is again same as mounting directly to shaft. Just it improves your design. But you can connect directly to shaft and reduce some cost of the build.
EMC utility lite is not letting me configure the pedals and the steering wheel, the max and min positions of the pedals are randomly going back and forth, and the steering angle is not increasing, please help
RFR wheel config don`t see my leonardo, with another software for FFB wheel this program see my device and com port, what could be, won't you tell me? Thank you in advance
1. Check connections from Arduino to motor driver. 2. Check if your motor driver is defective by referring to this video: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-H2YJRaaXFIM.html
Awesome Project again, I cailbrate acceleration and Brake. But when I turn one potentiometer The value of other potentiometer is also changing. What could be the reason? I tried a lot of calibration, and I couldn't solve it. Any help is appreciated
Thank you, You can replace the potentiometer and check. Even I was facing this issue earlier, After using this type of potentiometer(B10k), issue resolved: www.google.com/imgres?imgurl=https%3A%2F%2Fm.media-amazon.com%2Fimages%2FI%2F61CYQGQz8HL.AC_UF1000%2C1000_QL80.jpg&tbnid=V9Se71hpLGu8OM&vet=1&imgrefurl=https%3A%2F%2Fwww.amazon.in%2FElectroBot-Linear-Taper-Rotary-Potentiometer%2Fdp%2FB07QB32TD3&docid=g6yyn0PKGfBqCM&w=927&h=1000&itg=1&hl=en-IN&source=sh%2Fx%2Fim%2F4
When I click on the EMC program to configure the steering wheel and pedals, it doesn't give me the option to configure, look at minute 14:35 where that box appears, it doesn't let me configure anything.
How do make the steer turn of f1 equal to steer turn from the hardware? If steer turn in f1 is 90 degree then my steer turn should be 90 degrees as well
can I use any other encoder under 500rs and what values should i enter in this software 14:50 if I am not using the ffb motor and the 600ppr encoder. And suggest me any alternative to the 600 ppr encoder under 500rs and the value i need to enter on the software. And what options to select in hbridge 15:10 if i don't use the ffb motor.
1. Using cheap encoder: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-7c1FGc-xNLc.html 2. (PPR value * 4) 3. H bridge you can keep same. Anyhow if you don't use ffb motor it doesn't matter.
This Firmware supports 16 digital button inputs. Using the same we have made Paddle shifters, you can check out this: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE--gHQ2EIYm88.html
I think that motor is 2500 RPM, then Using this gear ratio, output RPM : 833 Output torque: 1.68 Nm I used these online calculators : Ratio RPM calculator: www.omnicalculator.com/physics/gear-ratio-rpm Gear Torque calculator: calculator.academy/gear-torque-calculator/ These are values from my build: Before pulleys- Motor Rated Torque : 0.87 Nm Motor RPM: 2650 Input pulley teeths(at motor): 15 Output pulley teeths(at steering shaft): 60 Ratio(Output / Input)- 4:1 After pulleys - Output RPM: 662 Output torque: 3.48 NM
Yes you can use without FFB motor and motor driver board. But issue is, Even if you set the wheel degree to some value(example 300 deg), since motor is not there, degree won't lock. You can still move beyond and wheel centre keep on changing.
No, It doesn't work. Arduino Leonardo uses Atmega32u4 chip which itself has built in USB communication. So when you connect this , computer treat it as HID similar mouse, keyboard etc.
HELP ME something is wrong and force feedback doesn't work the wheel check doesn't work and cabels are good connected i dont know why this doesn't work :(((
Thank you In the schematics, there is button matrix and it supports upto 16 digital buttons. These can be used for shifter. Tomorrow I will upload video on paddle shifters, in that I have shown this.
![DIY Force Feedback Steering wheel | Circuit and Software Setup [in ENGLISH] , DIY Sim Racing Wheel](/img/logo.svg){kind=logo}
