DIY Hammer® designer chair produced with the bandsaw N4400 | Felder Group 

Very well made. Not many companies putting this much atttention to detail to their product videos.

Beautiful just got my bandsaw from your company

Oh, my . . . That was an impressive demonstration of simple tools and efficient planning -- and, if I may admit: when he started applying the finish my jaw dropped (as ALMOST did some saline solution from these old eyes). That's simply GORGEOUS! Nice work - and thanks for sharing!

Neat video and nice chair. Though I am surprised he didn't ease the front of the chair or something. I was surprised to see finishing come at that point. Seems that would be uncomfortable on the back of the legs for such a deep chair.

A melhor cadeira que eu já vi... nota 10, Parabens.

excellent work done, very very good. with bare minimum tools.

It's amazing... Fantastic work!

Very cool! Thanks. Looks like a great first project for my new H.B. Smith 36". The chair looks uncomfortable, but that sanding jig is badass, and I'll have to make one of those too!

thanks for your generosity of sharing. I know also how to keep the saw blade. good luck.

Very nice..good work 💯

wunderbar!!! I love it! I have a current bandsaw, but I like the capabilities you have added. I wonder if you would consider adding another component and setting up an attachment for the band saw to be used in the manner of a pin router to facilitate pattern cutting to aid in the speed of manufacturing. I would be very interested to see if this could be added on and if so I would like to test it. I am a chair maker in Oregon USA and I am very interested to work with you to develop this setup. Thank you for your consideration. Brian Noel

Absolutely beautiful.

A woodworking masterpiece!

I want both the Hammer and the chair! Awesome Hammer. Would be a nice Christmas present. Like " I got you a Hammer... WTF??? I have 3 already... Well (then take em to the garage or shop) you don't have this one..! Whaaaaaaaaa!"

Great video! I would love to see more like this from Hammer

Fantastic video --- thank you!

I live in Brazil, Gosteri, congratulations

I miss the joints. Using only one screw with butt joints for all the legs seems to be a very weak joint. At least dowels should have been used. It will break apart in a very short time.

Estou estupefata.Nunca havia visto uma obra tão perfeita como esta. Feita por este mestre da carpintaria. Tua profissão é muito linda. É a de Jesus de Nazaré. Que tuas mão seja abençoadas por Deus. E que estas mesmas mãos que fizeram esta obra de Arte tão maravilhosa possam ajudar aos que te rodeiam.Parabens é pouco pra você.

I know he built it in one day cause he was wearing the same shirt....DANG!

wow that micro planer was doing work

Excellent presentation. Beautiful chair. How come you did not use any glue?

Super ! Mi-a placut foarte mult imbinarea intre lucrul manual si cel cu masina hammer ! Cred ca e mai util ca in filmulete, pe langa caracteristici sa se vada si ce se poate face cu un utilaj.

yes awesome

Nick might be a good starter chair.

Very nice chair, easy entry point for someone to make. I like the design and the simplicity of the build. Chairs can be hard to make, this makes it approachable for beginners. The joints could be backed up with dowels or if you have a domino just use domino joints, but that is not the point of the video.

very nice video & clearly tutorial

دول نجارين محترفين وشغلهم نضيف وروعه والصنايعى الفاهم شغله بيبان عليه

Nice job I’ve watched half dozen times and now building one. Question - why no glue?

We're here to pump you up.

Thank you

GRACIAS

Uma linda peça, parabéns!

Sehr schön, Ich gratuliere Ihnen

thank you thank you thank you

OK, now, I have the hammer N4400 and the C3-31. Let's see what I do.

очень хорошее полезное видео спасибо вам

Nice! piece of art!

Very nice chair and perfect tool, just wondering where can I get that tape measure and the plans for the chair? thanks for the beautiful work

what is the actual measure for the chair ? please I HAVE HAMMER MACHINE , AND I AM GLAD TO HAVE IT ---- MR.M.FANOUS ,,,,,,,,,

Step by step we go through how by using a HAMMER N4400 bandsaw, a couple of hand tools you too can make this unique work of art.

Sería bueno que se mostrara las uniones como lo realizo para poder estar conforme con tu tutorial gracias

At 28:45-30:45 is that just a big box store sponge or is it a special type of sponge? I really like the idea .

Hi, Could you use Hammer Bandsaw to make a rocking chair? I would like to watch video and also see plan too. Please, can you help me with some ideas or do you have a video with this kind of rocking chair like Maloof chair.

super work, amazing

What brand of ruler / tape measure is he using? I can't seem to find one like it. Thanks.

Hi, I'm new to woodworking. I wonder what those hand tools are called? what brands have good quality and where to get them? I'm looking at 26:42 in the video.

Loved your work 👍🏼

Thankx for the plan. Greatly appreciated. Is it possible to trace the actual size plan on plain paper and mail it to me. I am prepared to pay for the shipping cost.

عمل رائع

I would also like to know what brand tape measure ?

i like the ruler, what is this?

How many board feet of 8/4 material would be needed?

How much Weight the chair can support?

Maravilhosa!

can you give more projects to make? i very interested work with wood

Does this (the plans)print out as full size or is there some scaling or printer adjustments?

Ola Genial 100 Palavras,voce e um artista.OK

Perfeito!

If the idea is to promote that bandsaw, it's great. If the idea is to make a chair, it's way too much trouble. Using proper tools would save time and quite possibly a few fingers.

Yeah nice chair but you ruined it using screws would be nice to see joints

Essa trena que vc usa qual ea marca tem no brasil bom video parabens

Please Where and How can I buy this chair? This looks like my dream chair. I am in Mumbai, India.

You mention this is 'European Knotwood'? I can't find any reference to this type of wood - is it a type of walnut? Thanks

Website no longer working... where can I download the plans?

@ 15:27 the drill bits shown twist opposite to what I am accustomed to. Is this common in Austria?

I would like to obtain a wood plan for this chair. you mentioned I can download it from your website. Can you please advise the area for downloads. many thanx

Beaultiful! Would you send me the plan?

it is crazy.... that is why God invented power joiners and routers, table saws and drill press. Nuts!!!!

Instructions unclear: my workpieces have been reduced to crushed slivers and chunks.

No tongue and groove on joints?

Where did you get the large half round rasp?

Hi, what kind of wood did they use for this one?

for pvc furniture plan

É possível você editar um desing desse com escala para impressão pdf ? obrigado

How do I print this plan full scale

Very good would you send me the plans

What oil do you use for finish?

Why no glue?

how much thise machine

what is the thickness of the wood ?? thanks

What is the price of N4400 and CF741S?

احسنت 👍

Show!!!

what format is the paper for the template???

Anyone know what type/brand of rasps/files he was using?

the video is how to make a chair with the bench saw

I have downloadet the plan of the chair, but i need a password to print it in the authentic size. How do i get that? :)

Todo iba bien hasta que se les ocurrio ensamblar la silla con tornillos.

Very irritating musac, so I never finished, but wht the mdf template, why not just use the paper pattern, maybe print it on cardstock.

ohh the chair is very pretty i can do another better

Hmm

Such a product is spoiled 😟 screws on the need to spike, but the longer the better

There must be an easier way to make a chair

Next time... Don't use that annoying music! Nice chair!

👍👍👌👌🙋‍♂️🙋‍♂️🇸🇰

good.....but...

покажите пожалуйста как надо гнуть перила

he's using japanese planer wrong.

木栓かよ