DIY: Heat Shields (Part 1)

Подписаться 41 тыс.

Просмотров 63 тыс.

50% 1

Learn how to make your own heat shields from inexpensive materials found at your hardware store or industrial supply stores!
Keep your cold air intake cold! Make electronics last longer! Keep your fuel lines from getting hot! and more!
Check out part 2 of the video to see how to make these heat shields removable and an easy method to fasten them to metal panels in your engine bay.
Intro / Outro music from RU-vid's free music library:
Silent Partner - Long Way Home
****************************************************************
If you enjoy and have benefited from my content and are feeling generous I would love your support! You can "buy me a coffee" here:
► www.paypal.com... ☕
By supporting my channel you are encouraging me to continue with this time consuming endeavor. A lot of time goes into design work, building my projects, filming the videos, editing the videos, etc. Plus it all costs money! Your generosity goes a long way in helping me bring you better content as often as I can!
Follow me on Instagram!
► / embraceracing 📷
If you liked this video, perhaps you will also enjoy some channels that I personally find inspiring and interesting...
DIY and MAKER:
► The Hacksmith
/ @hacksmith
► Adam Savage Tested
/ @tested
► Thomas Sanladerer
/ thomassanladerer
Car Content:
► Mighty Car Mods
/ @mightycarmods
► Drivetribe
/ @drivetribe

Авто/Мото

Опубликовано:

21 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 63

@alsuncat 6 лет назад

Great video. The first car I had as a teen I burned out two starters. The guy I had bought the car from had replaced it before but never put back the heating shield. My dad pointed that out. He cut up a pie tin. put some holes around the corners. wrapped it around the starter, placed sos pads around the starter, to act as a buffer strung wire thru the holes to keep it place. Kitchen made heating shield.

@EmbraceMaking 6 лет назад

Whatever works!

@Fosgen 4 года назад

It should keep radiant heat off very well. I have something similar, tightly around hot turbo side and manifold. Wrapped by stainless steel ties. It works.

@user-neo71665 6 лет назад

If you get some aluminum flashing cut in 1 inch strips you can trap it in the folded over sections and rivet them in place. This makes it where you can form the shield to contours better and holds to the part better.

@EmbraceMaking 6 лет назад

Great idea! Thanks!

@TheSuffamc 6 лет назад

This channel will blow up

@EmbraceMaking 6 лет назад

Thanks! I hope so!

@longislandnewyork6707 7 лет назад

Embrace Racing Thank you so much for the info.

@EmbraceMaking 7 лет назад

You're welcome!

@Campos2011 6 лет назад

The 7 Unlikes include DEI 😂. Great video.

@EmbraceMaking 6 лет назад

Yeah, the mark up on automotive aftermarket products is insane!

@Ben-vm5hm 5 лет назад

Thanks dude

@EmbraceMaking 4 года назад

Thank you for watching!

@Grenadieros 4 года назад

At 8:20 was the most crucial part,the gap so the air can circulate may people forget this and wrapping so tight their items on engine bay that air can not pass around them.

@EmbraceMaking 4 года назад

Good advice, thanks!

@fordaddict2610 2 года назад

Hey man, you didn't put a link below to part 2??? Now I gotta retype the whole description again!!!!!!!!

@katemcguire2504 3 года назад

Great video! I'm not clear on what the actual material is that you are using. Any suggestions on what to buy?

@EmbraceMaking 3 года назад

Just go to a industrial HVAC store, it's a heat blanket type of material. some kind of fiberglass interior with the aluminized outer coating. Not 100% sure what the official name is but ask for a heat shield blanket and the HVAC place will know what you're talking about.

@DinasGarage 8 лет назад

Thanks for this! Wondering if there is a part 2 for the led thing you made a part 1 for.

@EmbraceMaking 8 лет назад

Thanks for watching! Part two of the LED video is still coming! It's a little more involved with all of the screen captures and all that so it's been taking longer. Be sure to subscribe so you don't miss it!

@unproductiveworkshop 3 года назад

Wild question: Can steel retailing shelves work when making a heatshield? My friend has a few shelves for some reason.

@EmbraceMaking 3 года назад

You can make metal heatshields, yes. It will reflect the radiant heat from the source. It is pretty common for auto manufacturers to do this from the factory.

@meavtouch7273 8 лет назад

Good channel, I love your video. Thanks for sharing. LIKED, Subbed

@EmbraceMaking 8 лет назад

Thank you so much for your comments!

@kermitefrog64 5 лет назад

Good idea. Where do you get the aluminum fiberglass?

@EmbraceMaking 5 лет назад

I got the material from a local industrial HVAC store. Much cheaper than buying automotive stuff which is identical.

@Irvine7214x6apc 5 лет назад

Interesting video, learnt quite a lot ;) For insulating my car's air intake from radiant heat, will aluminum foil tape do? My car's got black rubber air intake tubing. Also, should I also cover the whole airbox as well - for best results? Many thanks in advance ;)

@EmbraceMaking 5 лет назад

Theoretically it will help, but you probably won't notice an appreciable difference on a road car. My thinking is that the air is travelling through these components at a pretty good rate of speed and there isn't a whole lot of opportunity for heat transfer to occur unless the temperatures are extreme. The heat shields in this video were more intended for protecting items that are constantly bombarded with radiant heat from nearby components. But you can always try!

@Irvine7214x6apc 5 лет назад

@@EmbraceMaking The exhaust manifold does have a heat shield from the factory, but even so the engine bay is indeed hot after a 10-15 km drive, so I suspect "every little will help" ;) I will give it a try, hopefully it will help, just a little, reduce intake temperatures. Thank you for the reply and the information you provided me with ;)

@EmbraceMaking 5 лет назад

No problem! Good luck!

@Irvine7214x6apc 5 лет назад

@@EmbraceMaking Thank you very much mate! ;)

@tjduskey2889 4 года назад

Excellent video. What heat range is the heat shield you bought? The highest heat shield I have found only is up to 180 farenheit.

@EmbraceMaking 4 года назад

To be honest I don't recall what the range was... but it is still holding strong years later!

@stevemurphy3242 8 лет назад

I didnt know you could buy rough HEAT material like that. Where can you even buy it? Ebay?

@EmbraceMaking 8 лет назад

I got it from a local supplier, they specialize in industrial hvac supplies. Try searching industrial supply stores for thermal barriers. It's just aluminized fibreglass

@miataganggarage4680 7 лет назад

cool channel i just subbed

@EmbraceMaking 7 лет назад

Thanks, appreciate it!

@ferozhaiderali7598 3 года назад

What thing is silver thick paper from where can I get ????

@EmbraceMaking 3 года назад

I think it is just pipe insulation and I got it from an industrial HVAC shop. Just check the temperature ratings on it but it is the same stuff they use for cars... but for cars they mark the price up 10x

@user-yl1vk2nh9i 7 лет назад

smart

@EmbraceMaking 7 лет назад

Thank you!

@ferozhaiderali7598 3 года назад

What thing is use this ??? N from which shop I can get this ???

@AzeOfSpadez 7 лет назад

subbed

@EmbraceMaking 7 лет назад

Thank you so much! Means a lot to me! I'd love to hit 1000 subs before the end of the year!

@allencrossland1973 7 лет назад

great video, what would be a good way to fasten this shield to the starter? I have a 77 corvette and the header is very close to the starter and transmission lines. Thanks

@EmbraceMaking 7 лет назад

You can use metal zip ties, they will resist the heat :)

@josuu104-7 6 лет назад

Wrap around transmission lines ?

@longislandnewyork6707 7 лет назад

Does aluminum foil work to reflect heat.

@EmbraceMaking 7 лет назад

Aluminum foil will reflect lots of radiant heat. However, it will also absorb some and the energy absorbed will be dissipated in every direction from my understanding. So, foil on it's own would allow some radiant heat to reach whatever it is that you're trying to protect from heat. It would be most effective to place some kind of insulating material (ie. fiberglass) between the foil and whatever it is you're trying to protect. Therefore, radiant heat escaping to the other side of the foil will not reach your heat sensitive item. Hope that helps!

@kanavgupta9136 6 лет назад

Which material is heat shield made up of??

@EmbraceMaking 6 лет назад

It's more or less fiberglass cloth with a reflective coating. Hope that helps!

@anthonysalgado4588 5 лет назад

I have a feelin it flew off within 43 seconds from the drive way

@EmbraceMaking 5 лет назад

Negative... still going strong to this day :)

@shantaymadison5581 6 лет назад

Really enjoyed your video. Let's check Avasva plans also

@user-de3lq6tq2t 5 лет назад

The sound is the worst get a mic

@EmbraceMaking 5 лет назад

I now own 4 different mics for RU-vid lol

@ZeroMass 6 лет назад

Wrapping a starter? Heat isn't going to affect your starter... Not unless your ECU is in there : /

@EmbraceMaking 6 лет назад

Solenoid can get heat soaked and too much heat = more resistance and starter won't engage.

@josepeixoto3384 5 лет назад

@@EmbraceMaking hot copper wire, more resistance? no!! unless the copper is melted (1050ºC); i would just wrap the cut sheet around the starter,and use 2 loops of thin ss wire around the whole thing