DIY : How to make Vertical Hydroponic System using 8 Towers (Part 1) 

This is next Gen farming. If my next apartment has a balcony, I will 100% be building this. I've got this series saved. Thank you :)

I like how you fold under the lip of the bottom of the pocket. This makes for a stiffer tube and creates a smooth edge that a plant branch won't saw itself off with when the wind moves it.

Thanks for providing all the details. I will be trying to make a rendition of this soon. First I need to save up for all the parts. Thanks!

great video. I am excited to see part 2. Looking to do something like this.

mantap designnya..lanjutkan berkarya.

I made my rendition of the quad station and now moving into final copy; additionally I will be 3d printing my net cups for lengths as well as my seat for the cups. Resourcing materials ideas; if you go onto a construction project; 3’ to 4’ often is wasted and they end up in the garbage piles… I find that Canadian pvc pipe is much thicker and will split even with adequate heating for reaming. I will be developing a method that only requires a stencil and hole cut due to thickness of pipe due to frost line requirements

Thank you. Great video

This looks nicely done

Well done. Thanks for sharing. SD California.

Cleanest build for a vertical tower. Kudos! 👊

Great video, but sorry I think I miss how do I connect the water supply?

Thanks for Fantastic video

Apikk ceh 😍

Wooow, thanks for this

I love your vlog

I always watch your video

Best DIY I have seen

Semakin top dehh

Hello, the tube you use to shape the hole after heating, what measurements is one or two inches?

Thank you Sir 😊

How would the water system work can you do a video

Is the density of the pots too great? Will the plants be competing for space and sunlight? How about harvesting difficulties because of the density of the plants?

Excellent very inspiring

brilliant!

So, once your plants get more mature, how many times a day are you adding more water? I have a rail system with around 70 plants (lettuce/kale/Swiss chard) and on warm days, it can go through 4 gallons of water. I use a 17 gallon tote for my res. I don’t see how this thing can keep enough water in it without constant refilling. Plus, it’s all exposed so the water temps would rise when in direct sunlight.

Hi, what is the thickness of the tube 4 inch? 1.8 / 3.2 ! ..

dengan 8 tower yang elegan hydrophonik nya

Nice

Excellent thank you 😊

Semangat bikin video ka :)

Bang,, btw... Kira2 sediain pipa 4 " brp batang itu bang sebelum dipotong-potong?

Jadi total butuh brp batang pipa pvc 4"?

How many 4 inch pipe was used?

Can you tell me why you using a coupling cant you just take the 4" pipe straight through to the elbow?

TOOOPPPPP!!!! 👍👍👍👍👍

Interesting...

Are you worried about PVC leaching chemicals? Are the materials food safe?

Please do more videos on hydroponics

part 2 bang lanjut

No water source? How you going to water all 8 towers?

Please send me the list of materials

How do you stop the heated pipe from splitting when making the hole?

hello, do i really need the white pvc? because i used orange before and it tear so bad the holes are not clean

What’s the measurement for the slit that you cut is it 2inches 50mm ??

Gampang ternyata 🤪

How much size is the tapered pipe that used to hole shape the pvc pipe

mantap..

Hello brother, what inch of net cups did you use ?

What’s a good pump for this system?

Hi, can you please suggest what pipe to use?

What would be the best way to light this if it was indoors?

Untuk ukuran netpot brpa cm tu Om.. pakai pipa brpa inch?

You need to figure out where to put a reservoir, where the pipes will drain to and how you will distribute the water, I have to add about 2 -4 gallons a day to mine (tomatoes and cucumber). A system this size will be very thirsty. Like the idea

how will you water those ?

Sistem pengairannya gimana tuh?

Kreatif

HOW LONG DOES IT TAKE TO MAKE 10 HOLES ON ONE PVC PIPE? DOES IT ANY ONE OF AN EASIER WAY TO DO THIS? ARE THERE PRE-FORMED PVC PIPES AVAILA LE? IF SO, WHAT ARE THE SUPPLY SOURCE & COST?

instead of 90s on the center 2 up rights, you should just have used tee's. This would give you more water capacity and not made any difference to the look.

Mesin air hidup jam berapa aja mas?

Order online bisa?

What is the total cost?

Pake hairdrayer bisa gg y

udah dicoba dengan menyemai tanaman di vertical pipa ini pak?

Plz querier this products from me

do you sell these

echigla matanca gatun gatun jakuba

*****Be sure to glue the piping together or you will certainly regret***

where the risult?

Estimasi biaya abis brp ini bang?

Where is part 2 ?

i think you dont know where did you made a mistake isn't it?

PVC is stable and does not leach petrochemicals into the water unless you heat it - so you heat it. Wtf?

216 not 261

The thumbnail lies, there are hardly 20 holes in every tower (which is plenty) and if math is not an opinion there should be a total of about 160 holes, where did he get that 270 or something 🤣🤣🤣

Materials needed, $500 of PVC pipe and one can of $10 glue.. 😆

Thanks for sharing. Sad though to see you wearing a mask to work alone and outdoors...

Wearing a mask in the empty space in front of a mechanical object... ?? smart? :-) ha-ha! thank you for the joke.

Music is annoying

klo seperti ini lebih mahal ya jatohnya