No video :(

DIY Kayak Trailer Builds, SAVE MONEY and Avoid These Mistakes!! Tips & Tricks 2023

Подписаться 84 тыс.

Просмотров 28 тыс.

50% 1

This week I'm working on my DIY kayak trailer. In this video I'll go over how to build your very own kayak trailer and how to SAVE MONEY while doing it. Use these tips and tricks and avoid these mistakes when you start your build. Remember, if you have any questions feel free to reach out in the comment section below. Thanks for watching and be sure to hit that subscribe button!
👇🏼My DIY Kayak Trailer build videos ( For this Kayak Trailer)
1- • EASY!! DIY Kayak Trail...
2- • DIY Kayak Trailer Buil...
3- • DIY Kayak Trailer Upgr...
4- • DIY Kayak Trailer | Ad...
🎣 JOIN the Yak-Squad here! ↓↓↓
/ @kayakusa1
⬇ HERE'S SOME AWESOME COUPON CODES! ⬇
www.waterlandc...
➡Use Code KAYAKUSA FOR 15% OFF
www.guardianan...
➡Use Code KAYAKUSA FOR FREE GIFT
gokarls.com/ka...
➡Use Code KAYAKUSA TO SAVE BIG!
Get your wireless Kayak Lights here👇🏼
www.guardianan...
ALL of the music in this video is ROYALTEY FREE / COPYWRITE FREE music from the websites below..👇🏼
🎶 Music - Mixkit.com
🎶 Music - www.bensound.com
📋 Find ALL my gear here! ▶ kit.co/kayakusa
📩 Wanna Collaborate with me? - kayakusa311@gmail.com
📺 My Amazon Store - amazon.com/sho...
💰 Shop Karl's / Mystery Tackle Box - gokarls.com/ka...
( use promo code "KAYAKUSA" when you sign up for your MTB !!)
☕ Wanna Buy Me A Coffee? - buymeacoffee.c...
📲 SOCIAL MEDIA
Instagram: / kayakusa
Facebook: / kayakusa1
Twitter: / kayakusa
📸VIDEO GEAR
- Insta360 ONE X2
www.insta360.c...
- Sony ZV1 amzn.to/38QdbhL
- GoPro Hero 8 amzn.to/36OOn9d
- GoPro Hero 5 amzn.to/3nA7w4Q
- Olympus Cam amzn.to/372e06L
- Rode Mic amzn.to/36WnL62
- Rode Wireless Mic amzn.to/3nvIwM5
- Editing Software amzn.to/3jMudAm
- DJI drone - amzn.to/3sobqCI
#kayakfishing #kayaktrailer #kayakdiy

Опубликовано:

21 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 65

@jaxduxford3945 Год назад

Love the trailer! If you have to put new carpet on, you might could try wrapping some cheap saran wrap around it until the glue sets.

@neverfalter6702 Год назад

Glad you are back. Missed you man! I like the carpet! One thing you can do if the trailer is hot, back it in the water and leave it for a few minutes (obviously not if the ramp is busy, you might end up in the lake instead lol)

@timdoll6718 Год назад

You did a professional job on the trailer. Your work area is super nice,clean organized and uncluttered. That’s a nice touch adding the attached retractable tie downs. Outstanding Job !

@KayakUSA1 Год назад

Thanks Tim!

@Carlos-in6ko Год назад

Contact cement applied with a paint brush on both carpet and runners and wait a few minutes till the get tacky would have done the trick

@michaelsuggs1139 Год назад

Could take self tappers with washer to secure carpet. Just screw it in the bottom.

@JD-HALL Год назад

Thanks TJ. Glad I found this. I'll be making similar mods as well. Subscribed!

@massivehorsepower Год назад

You will like the carpet, it will keep the EMT cooler for sure. Wondering why you had to build brackets for the emt. I used unistrut and pvc pipe, could had just bolted it right up. Love the trailer.

@artvance8251 Год назад

Good seeing you, nice video.👍👍👍

@robcopenhaver2800 Год назад

Great job TJ. Welcome back bud and always have enjoyed all this time.

@KayakUSA1 Год назад

Thanks man!👍

@SimplyReelTV Год назад

Great video TJ! Glad you are back on the Yak vids. I built your garage kayak cart and just love it, it’s also handy for holding my ice fishing sled during ice fishing season. You are my go to for kayak mods and ideas. Keep em rolling!

@KayakUSA1 Год назад

I appreciate that bud! I’m excited to get back out on the water soon! 🤙🏼

@mikeryan925 Год назад

Welcome back TJ!!

@KayakUSA1 Год назад

Thanks Mike!

@johnroberts5602 Год назад

Metal hose clamps or even zip ties might apply temporary pressure until the glue sets up. A cheap vinyl tarp From Harbor Freight would catch any glue over spray from reaching the trailer. Just a thought. Nice work. Love final set-up.

@KayakUSA1 Год назад

Great tips! Thanks man 👊🏼

@orbnitsky Год назад

I pictured tightly wrapped saran wrap or something

@reallevasseur1934 Год назад

Love your video's TJ. I have a similar trailer and what I used on the steel sliders was round pipe insulation from HD. It comes in 5'-6' lengths and has a slit on one side that opens up and wraps completely around the pipes, comes in different diameters to match the size of the pipes. I used some wire ties to keep it in place but I guess you could glue it like you did with carpet I found it gives my Hobie some added cushion while travelling and sitting in the garage. Just another option to consider rather than carpet. Thanks for all your great kayak ideas.

@KayakUSA1 Год назад

Thanks! That’s a great idea 🤙🏼

@KiddNCoop Год назад

5-6’ lengths you must be speaking about rubber correct? It should have white stripes where the slot is and remove those it’s extremely sticky stretches as long as you have the rite size stick it together be good to go. I’m a piping insulator 😉

@reallevasseur1934 Год назад

@@KiddNCoop These were foam sections of insulation at Home Depot, They have a slit down the side that allows opening and sliding over the pipe, no sticky tape, that is why I use zip ties.

@tommysch9 Год назад

What size emt are you using..love the Idea

@Shoalie Год назад

I see that Auburn football in the background...War Eagle!!

@KayakUSA1 Год назад

WDE! 🦅

@viviendolapesca Год назад

Loved your runners. I wanted to ask if you have considered a roller on the back of the trailer to make it easier to load it back from the ramp?

@henryalicea1829 Год назад

Have you done any salt water fishing and if so do you recommend the salt water motor guide what are your thoughts?

@jimscheetz2613 5 месяцев назад

A few questions; ratchet strap brand that bolts to the trailer? The paint you use to paint your trailer and if it needs a primer first or not? Thank you!

@orbnitsky Год назад

Man... that metal always bothered me. Glad you put the carpet on!

@psauveca Год назад

I've been watching your channel for some time now and I like what you're doing, keep up the good work. But I have to ask, what is that side caddy(with the Tightline Anchor sticker) with the plano boxes in them. Where did you get that?

@waldnernick1 Год назад

I used same style trailer. I dont like the idea of storing my pa14 on the bars, personal preference, so I made my base out of 2x6 treated lumber so its 100% supported from front to back. I also put mine on trailer backwards so I can drive it off with trolling motor and back it back on like a full size boat. Just a second idea. theres more then one way to skin a fish..... missed the videos. hows the truck coming along?

@KayakUSA1 Год назад

Thanks man! I’ve got the motor in the ole Nissan, just got to do some fine tuning to her.

@423Bass Год назад

Awesome setup. So I am about to get a hobie pa14….. my question is how did you mount your fish finder where you did. I don’t like the graphs on the side h rails I like it in the front like yours

@stephenrayner6448 Год назад

Hi. I bought a jetski trailer to make it kayak (Hobie PA 14 360) ready. Can you tell what is the distance between both EMT runners? Center to center. Thanks

@katydancer22 Год назад

Thanks so much for this… love the channel. Watching all the old ones now. How did you get started with the trailer? Meaning where did you get the frame? Did you build that too and then add the wheels etc? Or did you buy that frame somewhere?

@ingridmorgan1694 Год назад

I am hauling a 15.5 and 13.5 trailer. Just bought a 12’ trailer with a 4’ tongue and 8’ flatbed. I am planning to add a receiver hitch on back with a 4’ truck bed extender to tailgate the kayaks. Would you extend the tongue? If so, what length?

@mdillon0920 Год назад

Should have zip tied every 6 inches until it stuck and remove them.

@johnnolker5272 Год назад

Could grab some hair ties or rubber bands to hold it in place so you don't have to babysit

@Madnais78 Год назад

Great video, what brand and kind of spray glue is that?

@KayakUSA1 Год назад

3M 👍🏼

@killywaugh360 11 месяцев назад

With is better 2x4 or pipe

@KayakUSA1 11 месяцев назад

Pipe/tubing

@willschaust7978 Год назад

Did you say what kind of carpet? I might have missed that

@BenHolliday1 Год назад

Are you going to fish the big Bassmaster kayak tourney on Guntersville?

@KayakUSA1 Год назад

Nahh I ain’t that good. 😂

@robertskinner3068 Год назад

Those hard steel pipes are going to deform the bottom of your boat. There’s a reason to use pvc pipe, they flex and conform to the bottom of your boat. Use cell core pvc they flex much better than regular pvc.

@KayakUSA1 Год назад

😂

@shanewarren3573 11 месяцев назад

Where did you get the tackle box holder on side of your boat (hrail mounted)

@KayakUSA1 11 месяцев назад

I made it, I have a short video on it, check out my channel and subscribe 🤙🏼

@chadhubler9803 10 месяцев назад

whats the length of the trailer

@KayakUSA1 7 месяцев назад

About 17’ 👍🏼

@Dakman04 Год назад

Could have maybe used a heat gun to activate the glue?

@finnslothHansen Год назад

Hi man. Thanks for these videos. :) Quick question, what's the spacing between the runners for the PA. Also I just bought an old jetski trailer for my PA14 360. It has the original square wood runners. Can I use those somehow, or should I change them out to pipes instead. Or bolt some pipes on top of the square runners. Thanks.

@KayakUSA1 Год назад

I believe mine was 11 1/2” on center. But measure your hull to be sure.

@gforcefishingandgaming8656 Год назад

what kinda glue did you use?

@KayakUSA1 11 месяцев назад

7mm spray glue 👍🏼

@ChrisJu3 Год назад

EMT tubings ain't cheap...

@SuperBoyd Год назад

Hey there brother. I asked before but you never got back to me. What kind of wheels did you put on your trailer? What size etc?

@KayakUSA1 Год назад

Check out my trailer build video I linked it in the video description above, I can’t remember at the moment what they were, but I definitely went over them and where I got them in the build video.